i will be trying this little jem out on my cascade later this week to see how it performs
to start with i will hook it up to a fx57
some pics
http://net7.info/1/cpumount/IMG_0040.jpg
http://net7.info/1/cpumount/IMG_0038.jpg
Printable View
i will be trying this little jem out on my cascade later this week to see how it performs
to start with i will hook it up to a fx57
some pics
http://net7.info/1/cpumount/IMG_0040.jpg
http://net7.info/1/cpumount/IMG_0038.jpg
i had the internals made to fit an ld evap but was told it could be supplied to fit
most evaps out there
http://net7.info/1/cpumount/IMG_0029.jpg
http://net7.info/1/cpumount/IMG_0030.jpg
Looks pretty damn similar to the order form I was spammed by PM awhile back.
LMAO funny i was just about to say the same about being spammed about one with really poor qutoing/copying!
Looks good Baz!
Looks nice :)
What is the yellow-ish insulating material?
Tom
it looks like PU foam or extruded polystyren :)
Looks like expanded polyurethane foam to me, very good insulator. I got that pm too :rolleyes:
Quote:
Originally Posted by n00b 0f l337
it is the same one hehe
i have been using vapo mounts for a while now but there is a problem with that
1 they dont like it
2 the cost
so when this unit came up i thought i would give it ago and so far i like it
i am unsure right now but it seems quite denceQuote:
Originally Posted by SoddemFX
when i set the unit up i will fix a k type the outside see how well it works
brazed up the line set for this mount today
http://net7.info/1/cpumount/DSC00053.jpg
http://net7.info/1/cpumount/DSC00054.jpg
Yes, I got that spam too, but at U$S99 each, it is out of the question.
I hope it works good for you buddy :D That's what matters:D
lol ron:D
I have noticed that for some here a sir clip and a bit of pipe lagging will do although
I have never understood how someone will spend $1400 on a build and then skimp on the mount
But others only want the best out there
In this case it seems to come down to cost
Until now I have used vapo clamshell mounts as i have felt they were the best imo but now there is a choice and I like this unit
That's why I preffer our mountings:Quote:
Originally Posted by bazx
http://img141.imageshack.us/img141/5...3medium8mt.jpg
http://img374.imageshack.us/img374/2...01small4so.jpg
:cool:
Nothing good comes for cheap, I agree with you
PD: Btw, That 3 are in his way to UK right now
bazx tell us if your new enclosure worked ok with the cascade. Any condesation problems around?
Quote:
Originally Posted by Unseen
sure i will have it on a fx 57 in the next few days to find out
also i will fit a temp prob to the out side
see how much cold is getting out compared to ambiant
You don't have heaters :DQuote:
Originally Posted by Ssilencer
Sorry, yes, I have :p:Quote:
Originally Posted by V I P E R
ok tryed it out now and with the mount hooked to a 57@3.6 there was no condensation
evap temp -93
also glued a k to the outside of the mount wall to see how much cold was getting out
and @-93 evap temp idle the outside of mount was 6c and that was running for an hour
http://net7.info/1/cpumount/DSC00103.jpg
Umm If Gray has not goten mine still or mine doesn;t do LGA775 i may have to get one asap a si think my unit is now finshed and uner laod testing at Gray's!
Baz ya got anymore or get more? i got shot of the Pm
i got this one direct from them it took 5 days and shipping was $10Quote:
Originally Posted by Pete
Very nice bazx I was looking at those mounts as well ;)
Have you got any figures on your fx yet :) I am sure if my cascade was colder I could squeeze more out of mine :(
this cpu mount will not work on intel 775 socket
sorry but i find it ugly too heheheh, for 99$ should be nicer lol
Very nice system yes but I agree with Ssilencer, $99 is rediculous for a mounting system period. They can do it chaeper if you buy 50-100 of them the cost is around $50 but whos is going to buy 100 mountsQuote:
Originally Posted by Ssilencer
Quote:
Originally Posted by Ssilencer
One of those will be mine, courtesy of Johann..;)
Well, they are already in UK :) Johan will get them on monday ( and the evaps, of course).Quote:
Originally Posted by raju
from left to right: Gray Mole's; Johann's; yours, iirc...;)
Quote:
Originally Posted by Ssilencer
i would like to test one of these units to see how it performs i will
use the same cascade and temp/load to compare them
can you send a sample for review?
I don't have any in stock, @itor makes them under order, and saddly I'm not a company to be able to send samples around the globe :( (no money, sorry)Quote:
Originally Posted by bazx
Did coolermaster sent you a sample for review for free?
I'm not telling the coolermaster is bad at all, I just think that is too expensive.
Also, dependis on the temps and humidity where you do the test, at 6c in the exterior I would have condensation for sure here (more than 60% average locally)
http://img520.imageshack.us/img520/7...nsacionni7.gif
Quote:
Ssilencer]I don't have any in stock, @itor makes them under order, and saddly I'm not a company to be able to send samples around the globe :( (no money, sorry)
Did coolermaster sent you a sample for review for free?
I'm not telling the coolermaster is bad at all, I just think that is too expensive.
Also, dependis on the temps and humidity where you do the test, at 6c in the exterior I would have condensation for sure here (more than 60% average locally)
i would pay for the shipping and then return the unit back there would be no cost to you
Ok, let me check, I will send you a pm when I get an answer.Quote:
Originally Posted by bazx
my 3 evaps has been sent back to argentina by the Courier service after they claim my house is abandoned. 1 failed delivery and they return it back to sender after 1 day.
Whatever you do, never use Parcelforce, it must be the worst company with the most retarded morons I have ever come across
That' fkjhing incredible man :mad:Quote:
Originally Posted by johann
Now I hope they return and I will find another way to send them.
We never had problems with Parcel until now.
I spoke to them for a while and the reason it was immediately returned is because the driver told them the house is abandoned/empty for some reason. The Couriers suck but I normally get my stuff from them without this crap.Quote:
Originally Posted by Ssilencer
I tell the guy on the phone "My house is not abandoned, in fact I was here all day"
He reply "The driver say the house is abandoned"
I say "Well your driver is wrong, do you not leave a card of some sort. I was I even supposed to know there was attempted delivery"
He reply "The driver do not leave a card if the house is abandoned"
I say "So your driver is wrong now my Parcel got immediately returned"
He reply "Yes that is correct"
I say "So you do nothing further to try contact the recipient or sender if your driver say the house is abandoned?"
He Reply "No we dont"
I say "So what happens to my $75 i Paid for shipping"
He say " It becomes null and void"
I say "So because your driver is :banana::banana::banana::banana:ed up and a complete moron my parcel gets returned to sender and I loose my money"
He Reply "Yes that is correct"
I say " So even though its completely your fault, you will do nothing to try and help or compensate me for this"
He reply " No we dont, we go on what the driver say"
I say " This is completely :banana::banana::banana::banana:ing rediculous, I have never heard of such :banana::banana::banana::banana:ing bull:banana::banana::banana::banana: in my life. Get a life :banana::banana::banana::banana:ing :banana::banana::banana::banana::banana::banana:"
He reply "throw phone down"
What can I do, absolutely nothing. This is UK for you. It is only here where such people would be allowed to do business atall and the funny thing is that it is the courier of the Royal mail postage service. This is the biggest joke I honestly ever experienced in my life. Even in 3rd world country I used to reside I never ever had any experience even come close to this.
Simply amazing
Legal advice dude!!! Phone up RM complaine, BBC watchdog etc..your aint the 1st, i took them to a small clames court, they said the same about my house but i had 3 random delivers throughout the day off them but the 4th which was form China never made it and driver said the house is derlicite and i'm think what so you posted me a card to say you'd try to of been gave it not even 24 hours, just under 5 mins form the call being made, loss of £200 shipping on it and customs, in the end court awared me a full refuned, return of good at no cost, nice wod of compensation and to be advised never to use tyhem again!
Well, I called to my own postal company, they told me if the parcel forgets to put a seal over the package telling what happend (and as they told me, that happends a lot of times) I will be sending it again at no costs.
I sent a lot of packages to uk and all europe without a problem, first time this happend, we will find a way, don't worry.
I just got mine and it may be some really stupid error but I cant the the mounting screws to go through the backplate past the threads.
Quote:
Originally Posted by GunnerMan
you have to rotate them thro the plate " screw them in"
baz:)
I did but once they get to the end of the thread it wont go anymore :/
Never was a fan of the threaded backplates, on a few of the newer ones I've simply used a bit to shave out the threads but maintaining enough clearance to get a secure mount.
can you drop in an image so i can see whats going on:)Quote:
Originally Posted by GunnerMan