Conroe E6300ES review =)

Thought it might be interesting to compare low-end Conroe to prev. generation CPU's :D

Opteron 170
Cooler Master Hyper 6
DFI LP UT nF4 Xpert
2x512Mb , Mushkin Redlines XP3500 , Winbond UTT
X1900XTX 750/900
250Gb WD2500JS-00MHB1 , S-ATA 16Mb
Win XP Pro SP2 , Cat 6.5

Vs.

T2600ES
Tt Big Typhoon
Aopen i975Xa-YDG unmoded
2x512Mb , Corsair Value Select VS1GBKIT667D2
X1900XTX 750/900
250Gb WD2500JS-00MHB1 , S-ATA 16Mb
Win XP Pro SP2 , Cat 6.5

Vs.

E6300ES
Tt Big Typhoon
Intel D975XBX "Bad Axe" Rev.304
2x512Mb , Corsair Value Select VS1GBKIT667D2
X1900XTX 750/900
250Gb WD2500JS-00MHB1 , S-ATA 16Mb
Win XP Pro SP2 , Cat 6.5

• Opteron 170 @ 3.0GHz , 300x10.0 , HTT x3 , 250MHz @ 2.0-2-2-5-1T
• Opteron 170 @ 2.8GHz , 280x10.0 , HTT x4 , 255MHz @ 2.0-2-2-5-1T
• T2600ES @ 3.0GHz , 231x13.0 , 385MHz @ 4.0-4-4-12
• T2600ES @ 2.8GHz , 215x13.0 , 359MHz @ 4.0-4-4-12
• T2600ES @ 2.6GHz , 200x13.0 , 333MHz @ 4.0-4-4-12
• E6300ES @ 2.67GHz , 381x7.0 , 381MHz @ 4.0-4-5-12
• E6300ES @ 3.0GHz , 429x7.0 , 429MHz @ 4.0-4-5-12
  

Bad Boys :D :

http://img212.imageshack.us/img212/4859/004small0er.jpg
http://img137.imageshack.us/img137/3...70small2qf.jpg
http://img212.imageshack.us/img212/3935/011small7bq.jpg



Games :

http://img84.imageshack.us/img84/8206/doom3demo17qs.gif

http://img154.imageshack.us/img154/6...3viavga2lo.gif

http://img152.imageshack.us/img152/6...cc2demo5fk.gif

http://img152.imageshack.us/img152/8...cc3demo7bh.gif

http://img90.imageshack.us/img90/3311/fear1056ot.gif

DVD > DiVX Encoding with Auto Gordian Knot 2.27 :

Movie : Night_Watch ( 1h54m )
Movie size on HDD : 4.06Gb
DiVX preset file size : 700Mb

http://img134.imageshack.us/img134/5...atchfps8hy.gif

http://img148.imageshack.us/img148/9...tchtime6yt.gif

Synthetic Benchmarks :

http://img225.imageshack.us/img225/9...ar360b4cv7.gif

http://img225.imageshack.us/img225/2...ster106cu0.gif

http://img221.imageshack.us/img221/2...mebench0ge.gif

http://img206.imageshack.us/img206/9914/stream20je3.gif

http://img153.imageshack.us/img153/9...mc100b9xh1.gif

http://img139.imageshack.us/img139/2...11ultrafl1.gif

http://img215.imageshack.us/img215/1...tshadowth5.gif

http://img132.imageshack.us/img132/6...1098cpuvs2.gif

http://img82.imageshack.us/img82/155...1098mmxzg5.gif

http://img89.imageshack.us/img89/435...ynamicsgl3.gif

http://img134.imageshack.us/img134/8...imordiaig5.gif

http://img87.imageshack.us/img87/376...bench95cr4.gif

http://img140.imageshack.us/img140/7...9118307ue5.gif

http://img138.imageshack.us/img138/7...gine807uv3.gif

http://img152.imageshack.us/img152/1...i15xs1mel6.gif

http://img223.imageshack.us/img223/8...15xs32mlv7.gif

http://img146.imageshack.us/img146/2...torliteyd5.gif

http://img147.imageshack.us/img147/6...rpro422sz1.gif

http://img149.imageshack.us/img149/5...fr025f21lc.gif

http://img148.imageshack.us/img148/3...mv10320rx9.gif

http://img138.imageshack.us/img138/5...hmark11lo8.gif

http://img157.imageshack.us/img157/6...rchiveryi2.gif

http://img143.imageshack.us/img143/1...800x600xc2.gif

http://img146.imageshack.us/img146/4...sphen2m6ca.gif

http://img148.imageshack.us/img148/6...arkv096rc5.gif

http://img150.imageshack.us/img150/3720/7zip442ox2.gif

http://img212.imageshack.us/img212/6...03beta2km1.gif

http://img218.imageshack.us/img218/8...ark9910ru3.gif


Links to custom test apps :

TesteR106
Stream
FactorLite
Nuclearus

Nice work I bet doing all those benches took a while so thanks :toast: What happened to the 170 @ 3.0ghz after the first 5 benchmarks it isn't shown? Anyway the opty kept up better than I thought it would but then this is the bottom end for conroe :D.

Nice one, and so comprihencive that even some larger hardware-sites could learn something from it :D
Though, I have to point out (as it was to me a few days ago), that technically, every chip below E6600 is currently not Conroe, but Allensdale, with a halved L2 Cache :)

Best Regards :toast:

Quote:

---

Originally Posted by DTU_XaVier

Though, I have to point out (as it was to me a few days ago), that technically, every chip below E6600 is currently not Conroe, but Allensdale, with a halved L2 Cache :)

Best Regards :toast:

---

No point in being pedantic as it's the same awesome arc as the conroe and they're all c2d. :toast:

melymel2789

Quote:

---

I bet doing all those benches took a while

---

Heh ... :D

Quote:

---

What happened to the 170 @ 3.0ghz after the first 5 benchmarks it isn't shown?

---

It's in "progress" :) I'l try to add 3.0GHz for Opty in a few days when i get time for that . I'l try to bench all that on my Venice 3000+ @ 2.8GHz and CedarMill661 @ ~ 4.8-5.0GHz also . I'l try to get more games too :toast:

DTU_XaVier

Quote:

---

Though, I have to point out (as it was to me a few days ago), that technically, every chip below E6600 is currently not Conroe, but Allensdale, with a halved L2 Cache

---

My bad ... it's 7.30 in the morning here , i think i stayed up too late today lol :slap:
Best regards guys :toast:

Quote:

---

Originally Posted by melymel2789

No point in being pedantic as it's the same awesome arc as the conroe and they're all c2d. :toast:

---

Awesome indeed :slobber:
Why can't it be august? :( :p:

Gorod, what's the max. stable clock on that E6300?? :)

Best Regards :toast:

Quote:

---

Originally Posted by DTU_XaVier

Awesome indeed :slobber:
Why can't it be august? :( :p:

Gorod, what's the max. stable clock on that E6300?? :)

Best Regards :toast:

---

I realy dont know , need a better mobo to find out :( With MCH v-moded "BAD AXE" i been able to game/prime all day long @ 3.0GHz , 430MHz FSB with Default Vcore for CPU ;)

Max benchable was 3233MHz (462FSB with crapy 1333MHz FSB strap :slapass: ) (default Vcore too :D ) , i guess i will never find out what that CPU is capable off unless there are any mobos with 500+ fsb coming out any time soon :)

http://img148.imageshack.us/img148/4...z462fsb3wj.gif

Quote:

---

Originally Posted by Gorod

I realy dont know , need a better mobo to find out :( With MCH v-moded "BAD AXE" i been able to game/prime all day long @ 3.0GHz , 430MHz FSB with Default Vcore for CPU ;)

Max benchable is 3233MHz (462FSB with crapy 1333MHz FSB strap :slapass: ) (default Vcore too :D ) , i gues i will never find out what that CPU is capable off unless there are any mobos with 500+ fsb coming out any time soon :)

http://img148.imageshack.us/img148/4...z462fsb3wj.gif

---

75% oc at default voltage... :woot:
Though, the low multi is a drag :)

Best Regards :toast:

Quote:

---

Originally Posted by melymel2789

Anyway the opty kept up better than I thought it would but then this is the bottom end for conroe :D.

---

Don't forget this is at 3GHz, and cache size doesn't really matter that much (minimal increases).

Great review. So much work done :clap:

I also added few links at the bottom of 1st post to some custom applications Gorod used in this comparison. Perhaps some of you might be willing to bench something new :)
I guess Gorod also might add few more links which I haven`t found myself.

PS Just click on the link how it`s shown on picture below

http://img411.imageshack.us/img411/6994/links9ju.jpg

Doesn't 6300/6400 ES have 4mb of L2 ? At least the first samples had 4mb L2...

Quote:

---

Originally Posted by ^don.k's^

Doesn't 6300/6400 ES have 4mb of L2 ? At least the first samples had 4mb L2...

---

No, they do not... They have only half the L2 cache of E6600 and above, and are codenamed as "Allensdale", though, other than that, they're identical to 4mb chips :)

Best Regards :toast:

Like what melymel2789 said the opty did quite well compared to the lower end conroe's. Conroe's are sweet but i already have an opty so it makes me feel not as bad lol.

Awesome professional review!!!

Nice chip,default vcore oc @ 75% lol:slobber:

Great review, it shows the Opteron can hold it owns clock for clock, but because conroe scales so well, the opterons will have a hard time keeping up

Damn, Gorod! Your latest comparisons are awesome! :up: Thanks for sharing, man :toast:

Thanks for putting the work in

BUT

As you said, Gorod...the results for the Opto170 at 3GHz REALLY need to be added, else the review doesnt really hold up. The E63 and Opto170 arent compared at the same speeds for a lot of tests, and the E63 is the one to have the clock speed advantage as well.

Once those results are added...I reckon that`ll be a damn good review

Quote:

---

Originally Posted by K404

Once those results are added...I reckon that`ll be a damn good review

---

It's a damn good review already.

And those saying the Opteron somehow holds a candle to those results are dilusional at best. Clock for clock even the 2MB Conroe seems a generation ahead as it should. Now we wait for K8L to answer (which according to DigiTimes breaking news today isn't due until 2008 now...) and so on and so forth.

Love all this competition, in the end the consumer wins. :)

I really dont want to knock the reviewer, but who games at 640.480? Yes, Conroe has a good lead at lower res, but at 1280.1024 and above...the lead will be much smaller.

Quote:

---

Originally Posted by K404

I really dont want to knock the reviewer, but who games at 640.480? Yes, Conroe has a good lead at lower res, but at 1280.1024 and above...the lead will be much smaller.

---

As discussed many times on this site and others, you test games at the lowest resolution possible when probing a CPU's limits because it isolates the CPU as the limiting factor as opposed to the video card GPU limiting speeds.

It's not about "real world" gaming frame rates in tests like these, the games are actually more like a synthetic benchmark for these purposes.

As far as the results being "much closer" at higher resolutions, that's correct, but not due to any sort of misplaced fanboy hopes regarding the Opteron holding a candle to Conroe. They're closer as the resolution climbs because the video cards have to endure more load. Eventually, say at 2560x1600, there is actually zero difference in the frame rate scores between any two CPUs...because the video card is maxed out and incapable of scaling any higher.

In most situations it looks like a 3.2GHz Core Duo Sonoma would do just as well as a 3GHz Allendale.

Please dont mention fanboy here, looks like you`re trying to get a rise out of me.

If a game is being tested at 640.480 to show one CPUs better performance against another, at the expense of real-world use...whats the point? Yes...one CPU will be shown to have better performance...but who will game at 640.480 to feel the benefit? I wont drop my resolution to feel better about my purchase :p:

If, at higher resolutions, the FPS difference is only 3 or 4.... is it worth the upgrade? People will be using their computers for high-res gaming, video encoding etc as well as, if not instead of benchmarking, they`ll want to see a benefit for real-world apps. Thats what i`m getting at.

I dont care if CPU X gets whupped or CPU Y costs £400 more. I want a fair comparison and real-world performance...nothing more, nothing less.

Kenny :)

Quote:

---

Originally Posted by Mako88

As discussed many times on this site and others, you test games at the lowest resolution possible when probing a CPU's limits because it isolates the CPU as the limiting factor as opposed to the video card GPU limiting speeds.

It's not about "real world" gaming frame rates in tests like these, the games are actually more like a synthetic benchmark for these purposes.

As far as the results being "much closer" at higher resolutions, that's correct, but not due to any sort of misplaced fanboy hopes regarding the Opteron holding a candle to Conroe. They're closer as the resolution climbs because the video cards have to endure more load. Eventually, say at 2560x1600, there is actually zero difference in the frame rate scores between any two CPUs...because the video card is maxed out and incapable of scaling any higher.

---

With the speed of GPU advancement and single-PCB multi-GPU cards in SLI or CF you can SOON expect to see a big difference at higher resolutions as well.

So yes, the game benches are pretty relevant. Don't want your CPU to hold you back in the end, do you? :D

Quote:

---

Originally Posted by K404

If a game is being tested at 640.480 to show one CPUs better performance against another, at the expense of real-world use...whats the point?

---

What's the point of Sandra? What's the point of SuperPI?

They're synthetic tests designed to illustrate differences in CPU/memory performance without interferance from other peripherals in the system. As I said earlier, that's the same reason you test games at the lowest resolution possible when looking at CPUs...to isolate them from the GPU. Real world gaming benchmarks? No, of course not. These tests serve a different purpose, which is clear.

Quote:

---

Originally Posted by K404

Yes...one CPU will be shown to have better performance...but who will game at 640.480 to feel the benefit? I wont drop my resolution to feel better about my purchase :p:

---

Same as my response abive. Again, in this particular review the games are being used in a way that best isolates the processor in the system. Think of them as you would CPUMark, or SuperPI. That's the point.

Quote:

---

Originally Posted by K404

If, at higher resolutions, the FPS difference is only 3 or 4.... is it worth the upgrade? People will be using their computers for high-res gaming, video encoding etc as well as, if not instead of benchmarking, they`ll want to see a benefit for real-world apps. Thats what i`m getting at.

---

Right, and this review wasn't meant to illustrate whether it's "worth" the upgrade only to gamers. Again, the video card GPU will always be the limiting factor in game frame rate performance above resolutions of 1280x1024x4AA. Always. So to judge a CPU from that aspect is foolish, as the fps difference is so small it's irrelevant. Luckily from the real-world apps shown above, the Conroe destroys the Opteron, clock for clock. So this review game you the exact information you're claiming you sought. Hooray!

Quote:

---

Originally Posted by K404

I dont care if CPU X gets whupped or CPU Y costs £400 more. I want a fair comparison and real-world performance...nothing more, nothing less. .

---

And that's exactly what you got. Was it tailored specifically for the gamer? Nope. As we've said, games only vary by 3-4fps at higher resolutions because they're limited by the GPU unless you're part of the 1% running an SLI/Crossfire solution. This review isn't intended for that audience, you'll have to look elsewhere for that.


Glad we got that sorted out, this review turned out to be perfect for its intended audience. Nice work Gorod, couldn't have done it better myself.

ok , i am back guys :)

K404

Quote:

---

If a game is being tested at 640.480 to show one CPUs better performance against another, at the expense of real-world use...whats the point?

---

well , like some people mentioned here , to isolate GPU bottleneck and compare actual CPU performance ;) I wish i had Crossfire setup so we can actualy use real world resolutions , unfortunately i have only one card at the moment :(
Like lets say F.E.A.R. , it won't run well enough with single X1900XTX @ 750/900 with AA enabled with and high resolutions . Been playing online , on a busy 16 people deathmatch server , fps monitoring with FRAPS 2.74 :

Opteron 170 @ 2.8GHz
Cooler Master Hyper 6
DFI LP UT nF4 Xpert
2x512Mb , 255MHz @ 2-2-2-5-1T
X1900XTX @ 750/900
250Gb WD2500JS-00MHB1 , S-ATA 16Mb
Win XP Pro SP2 , Cat 6.6

Arithmetic average from 5 runs for each resolution :

Min. FPS :

1600x1200 , AAx0/AFx16 , Max. Quality , SoftShadows - Off. : 27.8 fps
1280x1024 , AAx4/AFx16 , Max. Quality , SoftShadows - Off. : 22.4 fps
640x480 , AAx0/AFx16 , Max. Quality , SoftShadows - Off. : 45.0 fps

Avg. FPS :

1600x1200 , AAx0/AFx16 , Max. Quality , SoftShadows - Off. : 81.02 fps
1280x1024 , AAx4/AFx16 , Max. Quality , SoftShadows - Off. : 62.22 fps
640x480 , AAx0/AFx16 , Max. Quality , SoftShadows - Off. : 111.98 fps

1600x1200 , AAx0/AFx16 - it was ok
1280x1024 , AAx4/AFx16 ... well - i didn't enjoy it , fps are too low for online gaming :nono:
640x480 , AAx0/AFx16 - very smouth , but couldn't see anything on my 21" CRT lol

FRAPS log's if anyone interested :

1600x1200 , AAx0/AFx16 :

Quote:

---

Frames, Time (ms), Min, Max, Avg
44107, 590161, 31, 297, 74.737

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
90145, 903468, 29, 284, 99.777

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
66125, 897281, 28, 305, 73.695

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
73354, 899767, 24, 274, 81.526

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
67761, 898443, 27, 219, 75.420

---

1280x1024 , AAx4/AFx16 :

Quote:

---

Frames, Time (ms), Min, Max, Avg
54865, 898226, 28, 165, 61.082

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
57340, 896534, 20, 189, 63.957

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
10410, 147029, 22, 242, 70.802

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
30760, 591178, 27, 152, 52.032

---

Quote:

---

Frames, Time (ms), Min, Max, Avg
43307, 684274, 15, 201, 63.289

---

The point of running 640x480 is to compare actual CPU performance , isolate them from GPU bottleneck and get the idea of what would be the best choise for more powerfull next generation GPU's (or SLI/Crossfire setups u can get today if u are hardcore gamer :D )

I doubt it will do that big of a difference at another .2 increase. However, keep in mind that this is a chip costing at least 100-150 less than the OPty...

Even thought it will be lost onthe motherboards at these prices :(

i might be buying my first intel cpu in the next few months

DVD > DiVX Encoding with Auto Gordian Knot 2.27 :

Movie : Night_Watch ( 1h54m )
Movie size on HDD : 4.06Gb
DiVX preset file size : 700Mb

http://img134.imageshack.us/img134/5...atchfps8hy.gif

http://img148.imageshack.us/img148/9...tchtime6yt.gif

http://img150.imageshack.us/img150/8...m04s8cn.th.gifhttp://img146.imageshack.us/img146/6...m09s5as.th.gif

http://img222.imageshack.us/img222/1...0mhz8od.th.gifhttp://img222.imageshack.us/img222/3...0mhz3ip.th.gif

could you try to install the AMD MultiCore Optimiser Fix (if you didn't yet) and then run the games benches (and not only) again?

Quote:

---

Originally Posted by alayashu

could you try to install the AMD MultiCore Optimiser Fix (if you didn't yet) and then run the games benches (and not only) again?

---

Is there any proof it actualy does anything ? Because i realy don't want to rebench all that for no obvios reason , it will take too much time for that - about 12-16 hours :fact: of non-stop benching lol :rolleyes: :D
The good thing is that i managed to run all the tests with Opteron 170 @ 3.0GHz (had to use portable AC for that - it's very hot here :( ) and i am going to add all the data right now :toast:

Now my Opty is finaly happy again :)

http://img97.imageshack.us/img97/9020/0019up2.th.jpghttp://img141.imageshack.us/img141/8903/0024sy.th.jpghttp://img97.imageshack.us/img97/5766/0048ud.th.jpg

http://img132.imageshack.us/img132/6...ctiveac9qo.gif

Good job Gorod.:toast: What was that old Ricky Nelson song;

Quote:

---

you can't please everyone so you got to please yourself

---

I wonder if the retail CPUs will have a good chance of getting to 3GHz. I'm ordering one of these for my next system which should be done at the end of the summer. From what I've heard 2.4 should be easy to get unless you have a dud, but I'd really like to get 2.8 or 3. 60% OC sounds very nice to me :D

I'll be selling my current setup to get some extra money towards a DX10 gfx card as well so overall it should be a mighty good system by the time vista comes out (although that could be 2008 at this rate :p:)

Good job Gorod, keep it up ;)

Your benches prove not only that the C2D is THE gaming CPU, but also that its "2 MB only" L2 isn't holding it back like some people (hint: Sharikou) predicted it would.

Unless I overlooked something, it seems that the closest competitor of the Allendale is not the Opty, but the Yonah :D

nice review. i just might grab a E6400, but i'll wait a while longer for better boards to come out. if not, D975XBX for me :)

Can't wait for my e6400!!

Great work Gorod! I think many fanf AMD soberly will understand what CPU at present is most attractive on a parity productivity/price.
I have made the choice: Conroe - for me!

Hay Gorod rd600 MB wit its independent FSB of cpu clock can be proven usefull with this cpu:toast:
By the way i think i playd a guy named Gorod in FEAR MP last nite, eh if that was you my fear nickname is Ei$t|hc and yea i win allot like most of the time:D with my Dothan sys.

Anyway great overclock on default vcore. Any reason why you have not up the Vcore?

Quote:

---

Originally Posted by railer

By the way i think i playd a guy named Gorod in FEAR MP last nite, eh if that was you my fear nickname is Ei$t|hc and yea i win allot like most of the time:D with my Dothan sys.

Anyway great overclock on default vcore. Any reason why you have not up the Vcore?

---

That was me lol :D , i remember nickname Ei$t|hc from last night :D , we probably played together :toast: I play on my Opty rigth now , 2.8GHz and single X1900XTX @ 750/900 , have to use 1600x1200 AAx0/AFx16 because lower resolutions look ugly on my monitor (good old 21" CRT :) ) , i will probably need to go CrossFire for that game - single X1900XTX can't handle that kind of settings very well :(

Quote:

---

Any reason why you have not up the Vcore?

---

A very simple one :) - it hits FSB wall , need a better cooling for NB to go any higher then that . Found 80W TEC may be i will try use it to cool Northbridge , will see how much further it can go :toast:

Quote:

---

Originally Posted by v|aDy

I have made the choice: Conroe - for me!

---

You won't regret ;) :toast:

You remember mentioned about pelt? Put it on NorthBridge, and will be to you at least 500FSB. If you want about a design such waterblock I to you I shall tell in PM.

I like it. Looks good, is inline with most tech sites. Great Job :cool:

nice Gorod
just dont know if i should go for e6400 or e6600
so at 1600x1200 , AAx0/AFx16 , Max. Quality , SoftShadows - Off the frames were to low for you in fear mp

thanks guys , glad u like my small review :)

Quote:

---

Originally Posted by v|aDy

You remember mentioned about pelt? Put it on NorthBridge, and will be to you at least 500FSB. If you want about a design such waterblock I to you I shall tell in PM.

---

I have that TEC ready , only need to find waterblock now , will try to find one soon :)

Quote:

---

Originally Posted by Gun_Strife

nice Gorod
just dont know if i should go for e6400 or e6600
so at 1600x1200 , AAx0/AFx16 , Max. Quality , SoftShadows - Off the frames were to low for you in fear mp

---

It's not like u can't play it , fps are ok it's playable . But it's far from being perfectly smouth like lower resolution are , it was so much better performance wise when playing lower resolutions ;) Crossfire/SLI is higly recommended for F.E.A.R. if playing high resolutions :slobber:

Just did VDDR mod yesterday and i am going to retest that 6300 with some nice D9's (Corsair 8000UL) . Updated result's , more game tests and 3DMark & Aquamark comparo benches coming soon :toast:
Please note : high performance Boot Strap = 1066 ;)

http://img139.imageshack.us/img139/3148/023ek1.th.jpghttp://img90.imageshack.us/img90/8247/024qq5.th.jpghttp://img90.imageshack.us/img90/874/025ew3.th.jpg
http://img149.imageshack.us/img149/3029/026af8.th.jpghttp://img90.imageshack.us/img90/59/027xr7.th.jpg

2.45V , 537MHz @ 4-3-3-4 - Pass

http://img137.imageshack.us/img137/5...tweakedvl7.gif

http://img145.imageshack.us/img145/3...ar360b4mq4.gif

http://img155.imageshack.us/img155/9...stbenchkn3.gif

http://img155.imageshack.us/img155/9...encyjm3.th.gifhttp://img81.imageshack.us/img81/383...readgc3.th.gif

E6300ES @ 3.0GHz , 429x7.0 , 1.20V
Tt BigTyphoon
BAD AXE Rev.304
2x512Mb Corsair 8000UL @ 537MHz @ 4-3-3-4 , 2.45V

Super PI 1.5 32M : 16m57s

http://img99.imageshack.us/img99/180...m16m57spq5.gif

Nice Allendale review :)

Thanks for such a comprehensive review Gorod :toast:

This should help a lot of ppl make upi their minds which CPU to buy, great work :fact: :clap: :woot:

Another try , 3200MHz 3D & 3300MHz Super Pi done :toast:

E6300ES @ 3207MHz , 458x7.0 , 1.31V
Tt Big Typhoon + Portable A/C
Intel D975XBX "Bad Axe" Rev.304 , 1.918V MCH
2x512Mb Corsair 8000UL , 458MHz @ 4-3-3-4 , 2.5V
X1900XTX @ 783/951
Win XP Pro SP2 , Cat 6.6

Aquamark3 : 148.971

http://img20.imageshack.us/img20/782/148971age5.gif

http://img519.imageshack.us/img519/6...8971rm3.th.gif

3DMark05 : 15042

http://img118.imageshack.us/img118/3512/15042azy6.gif

http://img118.imageshack.us/img118/1895/15042cp7.th.gif

3DMark03 : 25221

http://img126.imageshack.us/img126/8856/25221aja3.gif

http://img160.imageshack.us/img160/7681/25221er8.th.gif

3DMark01 : 51362

http://service.futuremark.com/compare?2k1=9014916

http://img143.imageshack.us/img143/5423/51362aib5.gif

http://img238.imageshack.us/img238/5071/51362zs6.th.gif


3300MHz



E6300ES @ 3300MHz , 471x7.0 , 1.31V
Tt Big Typhoon + Portable A/C
Intel D975XBX "Bad Axe" Rev.304 , 1.932V MCH
2x512Mb Corsair 8000UL , 471MHz @ 4-3-2-4 , 2.5V

http://img69.imageshack.us/img69/4049/16984atu5.gif

http://img82.imageshack.us/img82/9154/16984rc9.th.gif

on the Screenshot i did see 3.3 Ghz only 2.83 Ghz with SuperPi why ????


Regards

Roger


Sorry Bug in CPU-Z or Speedstep !!!!