http://img204.imageshack.us/img204/5929/7600gt28rj.jpg
http://img463.imageshack.us/img463/8...gt3vgpu6iv.jpg
http://service.futuremark.com/compare?3dm05=2099808
@ 740/1720Mhz (1.65/2.06V)
Printable View
OMG! :slobber: ótimos resultados Barrel!!
os 800mhz ainda virão :banana:
:woot:
when you say 1720 do you mean 860 ?
and thats a crazy ass heatsink fan you got on that card.
which side of the gfx resistor did you solder to which side of the variable resistor? does it even matter?
I will probably be picking up a 7600gt to tide me over to DX10 and I will be volt modding it, unfortunately I am pretty much a volt mod noob.
thanks alot
how does that even fit. nice work
yep 860x2Quote:
Originally Posted by cMw
Quote:
Originally Posted by vapb400
It don't matter
pencil mods ftw
Always like looking at big hsf's on little video cards ..and nice results too. Excellent.
Regards
Andy
@ 686/1600Mhz (1.48/2.06v)
Full-Load
http://img474.imageshack.us/img474/8...atitool9ai.jpg
nice result :D
with my 7600gt I have do 7800 pt. stock cooling , but I had 75 ° in full :D
:clap:
That is a very clean and professional looking card there. Very nice mods you've done.:toast:
it does, if the VR is set at say 75k and you solder to the wrong 2 pins (assuming its 100k for example) you'd get 25k resistance.. = b00m..Quote:
Originally Posted by Barr3l Rid3r
and you much screw opposite ways for the different pins.. :)
but anyway awesome mod and nice scores
Incredible score there!:eek:
And great mod with the cooler...
what are the stock volts for a 7600GT?? :)
Best regards :toast:
Quote:
Originally Posted by lawrywild
Well, I'm thinking you do know wich legs you are using, cut one of the side ones off, if you are confused.
He was talking about the SMD resistor in the VGA, not the trimmer.
Quote:
Originally Posted by DTU_XaVier
1.3v
very nice work!!
my 7300gt(p456 pcb) 1.6v/1.86v@700/860
nice score..
my Galaxy 7600gs DDR3 goes 660/890 with no vmods at all
i get ~7.6k
i plan to do them soon ... i think i can beat your 8k ;]
using a Venice 2.8Ghz?
What is the difference between the cards? GS/GT
Quote:
Originally Posted by Barr3l Rid3r
Just lower clocks and not GDDR3 memory ( though some AIB might be doing a special with GDDR3 I guess ).
Regards
Andy
Quote:
Originally Posted by zakelwe
OK, so yous is basic the same as a 7600GT right?
Are u using an 2.8GHz Venice for thos benchas?
up cause conroe is comming
didnt someone hit over 10k with a 7600 GT?
just a fake at 10k5
the best score with single 7600GT is 9k by a french girl :slobber:
i want to beat her soon when i have my conroe :D and may be dry ice :fact:
nice cooling!
tou will get a smaller problem if you are going for sli whit this cooling ;)
Someone here use Galaxy 7600GE and got 700/1800 w/o any mods by stock cooler
Yep your right dudeQuote:
Originally Posted by Quentin
9641 exactly for 3DMARK 2K5
Validation: http://service.futuremark.com/compare?3dm05=2096189
Her rig (2006/07/03)
- Motherboard: DFI nF4 Ultra-D
- Processor: Opteron 165
- Memory: Corsair PC3500LL 2*512MB
- CPU Cooling: Zalman 7000 AlCu
- CPU Video Card: Watercooling 16°C
Vmod 800/941
1.7 vgpu / 2.05 vmem
17°C ambiant
http://img148.imageshack.us/img148/4628/9641op9ro9.jpg
LINK: http://www.overclocking-masters.com/...109848#p109848
yes she roxx french clocker girl roxx
(I'm a boy ^^)
ashley is a boy name too of course :)
no worries
Ahh, so refreshing with girls that spanks some butt in a he-dominated forum :D
:toast:
Nice to know that, good record there. I guess i'll wait till my Allendale+mobo before benching my 7600GT again.. maybe doing pencil mode in a few months, i just bought my card =). but is doing 640/1730 so far. (stock cooling, stock volts)
Great Score Angie :)
French Clocker Roxxx !
Actually not, I just need to switch for a slim fan ;)Quote:
Originally Posted by Gebba
Nice job Barr3l, and congratulations to the french girl!
Some more pao do queijo and you might hit 9k
soon 10k easily with a Conroe :cool:
She's beautiful and awesome about clocking, a sister for me ;) :exclaim:
Yup, Conroe would bring much more power to these babies. I myself will pair my 7600GT with an E6300 at 3GHZ. My new cooler will be here tomorrow :)
Question: is pencil-mod undoable?... i read that one just have to use an eraser.
thanks in advance, sorry for my english.
Big Sam has just put up some very high 7600GT scores with Conroe
65k in 2001 http://service.futuremark.com/compare?2k1=9016122
35k in 03 http://service.futuremark.com/compare?2k3=4905912
15.5k in 05 http://service.futuremark.com/compare?3dm05=2151377
7k in 06 http://service.futuremark.com/compare?3dm06=327091
Excellent scores for a mid range card Sam :toast:
Regards
Andy
:woot: thats a BFC (bigf*ckingcooler) on this card - looks very sweet.
wow, awesome scores thereQuote:
Originally Posted by zakelwe
congrats Big Sam :toast:
SLI helps u very much
Quote:
Originally Posted by zakelwe
Thanks Andy :toast:
I have not dared to show yet these results, because they are not final.
While I only consider as final result is single 7600GT in 01Mark. :)
http://service.futuremark.com/compare?2k1=9023735
http://img106.imageshack.us/img106/3...1m53421qt3.gif
I necessarily shall pass 05Mark on single 7600Gt and we shall look what will turn out. :)
BTW
In 03Mark on single card I have received more 20K but it also not final result ...
The result in 06Mark is received not on these videocards and it is received practically without video OCing
I would like to know if I need a bridge on intel SLI or if just hacked drivers can handle it..Quote:
Originally Posted by Big_Sam
I think that SLi will work without the bridge, but in this case productivity will be less.Quote:
Originally Posted by Barr3l Rid3r
Hey Barr3l Rid3r, are you planning to pair this card with a Conroe/allendale ?, i would like to see some benchies with a c2d and that card u got there.