Absoutly Powerful!!Conroe E6700 stepping5@4.109g by air cooling !!

Absoutly Powerful!!Conroe E6700 stepping5@4.109g by air cooling !!
platform
M/B ：MSI 975X Platinum 2.b
MEM ：Corsair DDRII 8000ul 512X2 Dual Channel
HDD ：Maxtor 300g SATAII 16Mb Cache
VGA CARD ：COLORFUL 7950G2X
POWER: Zippy 850W
OS ：WIN XP SP2 & sever 2003
CPU COOLER：Tower 120
CPU ：Intel Core 2 Duo Conroe E6700 Stepping 5

http://www.iamxtreme.net/coolaler//MSI975X2B/1.JPG

http://www.iamxtreme.net/coolaler/COLORFUL7950/1.JPG

http://www.iamxtreme.net/coolaler/co...ENSFIELD/3.JPG

room temp:28
vcore:1.6v
410.9*10=4109mhz WR?!@air cooling so far :D
spi1m

http://www.iamxtreme.net/coolaler/co...700_3/S5_1.gif

try spi32m :)

http://www.iamxtreme.net/coolaler/co...700_3/S5_5.gif

sisoftware :)

http://www.iamxtreme.net/coolaler/co...700_3/S5_2.gif

http://www.iamxtreme.net/coolaler/co...700_3/S5_3.gif

sisoft mem bandwidth

http://www.iamxtreme.net/coolaler/co...700_3/S5_4.gif

everest mem bandwidth

http://www.iamxtreme.net/coolaler/co...700_3/S5_7.gif

cinebench 9.5@17s

http://www.iamxtreme.net/coolaler/co...700_3/S5_6.gif

3d test@7950gx2

3DMark01@64947pts

http://www.iamxtreme.net/coolaler/co...00_3/S5_11.gif

3DMark03@41183pts

http://www.iamxtreme.net/coolaler/co...00_3/S5_10.gif

3DMark05@19101pts

http://www.iamxtreme.net/coolaler/co...700_3/S5_9.gif

3DMark06@10268pts

http://www.iamxtreme.net/coolaler/co...700_3/S5_8.gif

E6600 stepping 5 coming soon

Wow that is incredible. Stepping 5 owns!!!!!

Really impressive! :woot: You've done an unbelievable work! Congrats! :clap:

Just as FCG predicted! A 4ghz conroe on air! Nice work coolaler!

Wow gr8 chip you have there:p:
Paired with you secret 600HTT board and -100-110* You would probably beat Shamino SS and 1M
http://resources.vr-zone.com.sg/booe...N2_5GHz_01.JPG

very nice... what's that card in the PCI slot to far left of photo in first post ?

Nice work. Step 5, rev. C1 by any chance ?

Quote:

---

Originally Posted by eva2000

very nice... what's that card in the PCI slot to far left of photo in first post ?

---

debug card;)

debug card.. any details or linky to them heh

Quote:

---

Originally Posted by eva2000

debug card.. any details or linky to them heh

---

it just shows you which step it is during the POST:)

Any word on when that MSI board is going to be avalable?

woooot!!!

and for that MSI board i dont think its for sell anywhere besides taiwan, not in USA for sure. i check pretty much everywhere every site ....

Quote:

---

Originally Posted by eva2000

very nice... what's that card in the PCI slot to far left of photo in first post ?

---

doh....I remember you ask me last time not long ago,,,:stick: :D

forgot about that heh

Quote:

---

Originally Posted by Victorshen

it just shows you which step it is during the POST:)

---

i see :)

Where can I get a stepping 5 Conroe?

Nice results!

Quote:

---

Originally Posted by TheMeatFrog

Any word on when that MSI board is going to be avalable?

---

ver:2.1 issue soon

Always nice works!!:D

now you guys know where all my tweaking skill come from;)

nice, i have a question though, why arnt many people putting these things under ice?

Quote:

---

Originally Posted by johnsally

nice, i have a question though, why arnt many people putting these things under ice?

---

dri ice? or ice water?:D
if DI, then I think Guess2098 did that before.
I might do 2 days later, I have PCICE cascade results 1.45v@ 4250mhz though;)

http://www.ocxtreme.org/onepagebook/e67/1259e67s32m.jpg

let me rephrase that, extreme cooling/DI/ln2/Phase. Most of the overclocks are on air that i see. Wondering why not many others are thats all, want to see how far these babys can go:)

Quote:

---

Originally Posted by johnsally

let me rephrase that, extreme cooling/DI/ln2/Phase. Most of the overclocks are on air that i see. Wondering why not many others are thats all, want to see how far these babys can go:)

---

5070 is the record right now. They scale very very well.
http://www.xtremesystems.org/forums/...d.php?t=104227

wow, awesome air cooled results Coolaler!

Disabling 1 core would gain another 80Mhz :)

But If I remember right, MSI bios didn't have this option yet.

I'm curiuos what the speed feels like, what does a 4.1ghz conroe feel like in comparison to an opteron @ 3ghz..3ghz was blazing I find it hard to imagine 4.1

It feels like changing from Mazda to Lamborghini :toast:

Hehehe....stepping 5 is taking off. ;)

The chip I have is only FSB limited. I think I could get to 4.6-4.8Ghz AT LEAST with my single stage cooling if the MCH could run that high. Since 440 is about as high as the FSB can go stable with stock voltage maxed out, that's as high as the CPU will go with the 10x multi.

4GHz on air with the Conroe will continue to be the norm....we are going to see some great overclocks when these appear. :)

-FCG

step 5 = retail?

Cant wait to get one of these beauties!:cheer:

WHere does it max with stock vcore pls ?

Give it som ln2! :D

nice step

Quote:

---

Originally Posted by johnsally

let me rephrase that, extreme cooling/DI/ln2/Phase. Most of the overclocks are on air that i see. Wondering why not many others are thats all, want to see how far these babys can go:)

---

For me is....so much fun to push QPGA stepping 5 with air.

Nice chip there coolaler:toast:

very nice step and great overclock:clap:

Quote:

---

Originally Posted by `odin

step 5 = retail?

---

perhaps,Intel doesn't have the time for a new step, B1 is going to be retailed

Great job :toast:

You have really made XS a better forum. Thanks

Quote:

---

Originally Posted by johnsally

let me rephrase that, extreme cooling/DI/ln2/Phase. Most of the overclocks are on air that i see. Wondering why not many others are thats all, want to see how far these babys can go:)

---

Chips like 6600 and 6700 (not even mentioning lower-end ones) might be getting FSB-limited even on air on current boards.

did someone said B1 stepping?? but it can be rev B1, stepping 4 .. then its not as good as rev B1 stepping 5. anyway is retail, B1 stepping 5?? or B0 stepping 5?? or something else??

A1 = step 1 (shows as "A4" on the IHS next to the ES)
B0 = step 4 (some of these, E6400, E6600 also sometimes show as "A4" on the IHS)
B1 = step 5 (may be retail version, early version of CPU-Z 1.34.2 show this as "C1" which has been changed)
B2 = step 6 (speculated to poss. exist as retail)

Notes:
step 2 - 3 were internal only
"A4" on the core has nothing to do with actual core stepping

those steps5 are very ocers.

want to put my hands over one of them.

Quote:

---

Originally Posted by kiwi

Disabling 1 core would gain another 80Mhz :)

But If I remember right, MSI bios didn't have this option yet.

---

dsable core doesn't need to use bios to do so;)

Quote:

---

Originally Posted by Onepagebook

dsable core doesn't need to use bios to do so;)

---

Please enlighten us.:)

There should be a law against sub 15s on air Superpi runs :(

:p: Congrats Coolaler :up:

Perkam

Geez. This chip is just on it's knees for LN2!

How many boards have you tested this chip on, cooaler? Is the MSI a better board than the P5W DH or Infinity?

Outstanding work again.
That Revision 6 rumor is interesting. Has anyone actually seen Rev6?

Quote:

---

Originally Posted by freecableguy

A1 = step 1 (shows as "A4" on the IHS next to the ES)
B0 = step 4 (some of these, E6400, E6600 also sometimes show as "A4" on the IHS)
B1 = step 5 (may be retail version, early version of CPU-Z 1.34.2 show this as "C1" which has been changed)
B2 = step 6 (speculated to poss. exist as retail)

Notes:
step 2 - 3 were internal only
"A4" on the core has nothing to do with actual core stepping

---

Interesting indeed so Step 5 = B1 :)

Has there been a step5 chip that has not hit 4ghz on air yet?

very impressive Coolaler, must hunt me down one of those MSI V2.1 MOB

Does it do dual prime @ 4.0 GHz easy?

Quote:

---

Originally Posted by IvanAndreevich

Chips like 6600 and 6700 (not even mentioning lower-end ones) might be getting FSB-limited even on air on current boards.

---

ahh i didnt think of that.

I just also received a Stepping 5 E6700 and I'm hoping for 4ghz on air with a Zalman 9500. I will post results within the next few days. I sure hope these Stepping 5's are similar if not the same as the initial retail release.

Congratulations :toast:

Any ETA on this board ? Look great..

Quote:

---

Originally Posted by Onepagebook

dsable core doesn't need to use bios to do so;)

---

I know :) But I have not investigated if it has the same effect as using /NUMPROC switch for windows or maxcpus in linux since you still have all cores before loading OS. I am looking further to see if you can disable core 0 as opposed to what bios does.

Quote:

---

Originally Posted by dogsx2

Please enlighten us.:)

---

This is in msconfig :)

http://img93.imageshack.us/img93/8665/maxcpu8wm.jpg

air cooling?!?! what temps

Quote:

---

Originally Posted by kiwi

This is in msconfig :)

http://img93.imageshack.us/img93/8665/maxcpu8wm.jpg

---

whoa, so you can actually disable a core?

Quote:

---

Originally Posted by 5-Clicks

whoa, so you can actually disable a core?

---

yep

I guess im getting a tower 120

LOL... I can't believe you broke 10K in 06 with a single card... and almost 20K in 05 with a single card... just outstanding!!! :)

And El Snorro, beautiful sig. :D

Quote:

---

Originally Posted by p360stick

I guess im getting a tower 120

---

Me 2 :slap:

Quote:

---

Originally Posted by DeToNaToR.cl

Me 2 :slap:

---

if we can find them in stock anywhere....

coolaler your threads always prove something. If it's not a WR, it's a Kentsfield ES and this time a 4ghz Conroe on air as FCG predicted :clap: If all that doesn't make you a Xtreme Legend, I don't want to think what the other Legends had to do to FUGGER... :D:D:D

Quote:

---

Originally Posted by g0dM@n

LOL... I can't believe you broke 10K in 06 with a single card... and almost 20K in 05 with a single card... just outstanding!!! :)

And El Snorro, beautiful sig. :D

---

Well yes a 7950 is a single [connector] card, but it's 2xGPU. Of course that doesn't stop the result from being impressive, and surely the Conroe helps the card[s] :)

Quote:

---

Originally Posted by 5-Clicks

whoa, so you can actually disable a core?

---

this doesn't disable a core, just causes Windows to ignore the second core. it is still active, just idle.

so we have all these E6600's and E6700's doing ~4GHz on air. what about the lower models, like the E6300 or E4200? will they basicly max out the FSB on whatever board they're on, or will they make roughly 2.8-3GHz? (roughly same % overclock)

Quote:

---

Originally Posted by pik-ard v1.1

so we have all these E6600's and E6700's doing ~4GHz on air. what about the lower models, like the E6300 or E4200? will they basicly max out the FSB on whatever board they're on, or will they make roughly 2.8-3GHz? (roughly same % overclock)

---

I'm wondering the same thing, but most people seem to have an E6600, E6700, or X6800.

I'm guessing 4Ghz would beat my X2 @ 2.8 ;) This chip looks like it will walk all over 4Ghz on my water setup.

A conroe @ 2.6 ghz would beat your x2 @ 2.8 :)

Quote:

---

Originally Posted by M1nDH4cK

A conroe @ 2.6 ghz would beat your x2 @ 2.8 :)

---

I just got a Yonah laptop from work. It does 1m pi in about 34 seconds. The X2 gets that at about 2.6Ghz. The surprising thing is its a stock 2300 (1.66Ghz).