I'm thinking about trying one just for kicks... anyone else tried one?
Printable View
I'm thinking about trying one just for kicks... anyone else tried one?
Drozdov has one on his KD7 :)
Just got mine and fired it up last night :)
Quite impressed so far.
2250 @ 1.85Vcore bench stable so far.
will post more later
peace
WannaGoFast
nice, looks like I'm gonna get one :)
Sweet! I just ordered 2 of them yesterday. :D
1Z61WA270340974994
They need to get with FEDEX and USPS.
This is why I was curious wannagofast. You're in florida and I'm in Louisiana! Hopefully the chip will make me happy. What is your full stepping?
What's wrong with a week 45? ;)
http://home.planet.nl/~dikke332/2512mhz.jpg
It even does 2350 Mhz @ 1.85V!!!
3R poseidon watercooling
Currently running 2310@2.05v prime stable air cooled with slk800
40-44c damn hot night in florida :(
JIUHB 0307 SPMWQuote:
Originally posted by seversphere
1Z61WA270340974994
They need to get with FEDEX and USPS.
This is why I was curious wannagofast. You're in florida and I'm in Louisiana! Hopefully the chip will make me happy. What is your full stepping?
peace
WannaGoFast
Looks like they are only a bit better than the 0302's.. 8-)
2200mhz @ 1.85v (0302) here... 8-)
I still think it's worth the extra cash for the 2100 AIUHB, they have a lot more breathing room with voltages and really are not that much more. :)
Depends what kind of a budget your on, too, though.
True STEvil, it costs me $50.00 canadian more to get a 2100xp which is like around what, 32 dollars american? I guess that could get you an extra stick of generic 256 DDR these days :)
Yeah, but that extra $30 didn't get me anything with my f'ing 0301 2100+ from Newegg. Can only do 2.3 with 1.925v. And runs damn hot at that voltage. So I run it at 2.2 at 1.81. But I think alot of 1700+s can do that.
<-- posted up to 2500mhz 2.2v for kicks..
PC2100 didnt like it, though.. 200mhz was just too much.. lol.
SPMW also.
2386mhz 2.17vcore Folding stable.
SLK-800 75cfm TT2. I lapped my sink this time around and will try again when I get some of that anti seize compound.
I just got a 307, going to put it in my vapo rig tomorrow. Till then i put it to use in a Biostar Nforce2 Micro ATX board, GF4mx graphics one of MY Folding@home MB's.
No Volt or Mult adjustments on this board, I stupidly believed "TOMS Hardware" they got a prerelease board!!. Oh well. I fired it up @ 1170x12.5 for 2125mhz, Yeah it's not great or amazing, what's amazing it stock volts, With a SVC 68 $5 heatsink.
Running F@H for the last 8 hours
Im off all day tomorrow to mess with it.
Oh yeah I dont recognize any of our names in this thread.
Come join up for the Xtreme Folding team, We made it to 10th in the world, and need more help.
http://www.xtremesystems.org/forums/...?s=&forumid=55
Just mention my name and they will all welcome you with open arms, You want a stable rig, It aint stable till you can run it 24/7 folding. Lot of other help in there too.
Think your rigs fast?? Come out fold me and show me!!! If you can!!!!
Thanks for listening to my "whoring"!!!!
1700 JIUHB 0307 ????Quote:
Originally posted by Tedinde
I just got a 307
max folding speed @ 2.19vcore in my hot room
any of you able to get 2.1ghz stable at 1.7v? seems like it clocks a lot better at low voltage, doesnt seem to get to high at high voltages
Yes, that's why i posted.Quote:
1700 JIUHB 0307 ????
About to put it in my Vapo now with a 8rda+, taking out a 1700 "B" that's @ 2500mhz, Hope the chips better.
clearly my aircooling setup is NOT going to be adequate much longer :D
tedinde I'm asking what are the 4 characters after 0307 :>
JIUHB 0307 SPMW
http://www.n8s.net/imup/990mhz.JPG
All on air almost 1 GiG over :)
peace
WannaGoFast
Nice. At what voltage? Stable for prime and 3dMark?Quote:
Originally posted by WannaGoFast
JIUHB 0307 SPMW
All on air almost 1 GiG over :)
peace
WannaGoFast
stable......i wish lol
max stable bench speed was 2414mhz @ 2.2vcore 2.9vdimm 1.9vdd
3dbench is in sig
peace
WannaGoFast
wannagofast: that wcpuid shot is the highest you could get into windows to take a pic or just the best multixfsb combo to get into windows for a pic?
These are nice chips - I've been folding since the 5th with no problems.
that was as high as i can get cpu to post so far, just upped fsb pretty much how it was set from runnin 3dmark. Im sure if i fooled with it some i could go a bit higher.
peace
WannaGoFast
argh.. stupid ram 8-(
I stuffed a second stick of PC2100 in and its having troubles at 150 with 3.05v... im stuck at 12.5x133 until I can get a single stick of 512mb for cheap that will pull about 200mhz FSB.. 8-/
The second stick might be bad, too.. I've noticed winamp isnt playing so well anymore.. has a hitch or something now 8-(
weird thing about this chip is im rock stable at 10x210 at 1.7v but when i up vcore to 2.0v and try to run 11x208 its not stable at all.
Such a small difference in speed but a huge gap in Voltage.
They do seem to hit a wall, but that one seems pretty steep. Did you try intermediate steps?
yes i have, i can boot at 2.2ghz at 1.725v but its unstable
i continued to up Vcore in .025v increment untill i reached 1.95v thats where 2.2ghz was stable, then tried 2.25 is not stable until i used 2.0v
Odd, maybe the voltage thing is kinda heat related? Mine starts scaling worse after 2150mhz.. but I can still get 2300 into windows.. 2500 posts.. lol.
anyone got a 1700 0307 RPEW
i do not have a mobo to test this out yet and was wondering how good or bad it might be does the code tell ya anything ?