FX-57 0516WPMW meets Kayl Black Frozen SS

http://i4memory.com/phasechange/kayl...lation_000.jpg http://i4memory.com/phasechange/kayl...lation_001.jpg http://i4memory.com/phasechange/kayl...lation_003.jpg http://i4memory.com/phasechange/kayl...lation_004.jpg

http://i4memory.com/phasechange/kayl...lation_009.jpg http://i4memory.com/phasechange/kayl...lation_010.jpg http://i4memory.com/phasechange/kayl...lation_012.jpg

Full pics
http://i4memory.com/phasechange/kayl/arrived/1/html/
http://i4memory.com/phasechange/kayl/arrived/turnedon/
http://i4memory.com/phasechange/kayl.../NF4_UT_SLIDR/
http://i4memory.com/phasechange/kayl...F4_UT_SLIDR_2/

Yeah baby sub 21min! But man look at -20C idle cpu temps at 3515Mhz at 1.6v with load around -3C to -6C!

http://www.fileshosts.com/DFI/NF4_SL...erpi-8m_tn.png http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

managed suicide run with cpuz @3645mhz at 1.728v but after got the run bsod LOL

http://www.fileshosts.com/DFI/NF4_SL..._validated.png

Okay in an effort to find my ram's max limits for Super Pi 32M decided to drop the cpu multiplier and clock up the ram.

12x260mhz 2-2-2-0 7-12-0212 at 3.48v
&
12x266mhz 2-2-2-0 7-12-0212 at 3.65v
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

13x266mhz 2-2-2-0 7-12-0212 at 3.65v
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

Seems 266mhz 2-2-2-0 at 3.65v is okay for a comfortable overclock on Kayl Black Frozen SS with FX-57 :)

I'm pretty sure my FX-57 is limited by cooling right now to clock any higher >3.6Ghz probably needs colder load temps.

Difference between idle and load at >1.65v vcore is as much as a +28C delta.

After FX-57, will try Opteron 170 CCBWE 0546XPMW and FX-60 CAB2E 0536RPMW :D

Thank you Kayl :toast:

Very nice effort buddy; nice pics and runs. Kayl has done a great work with this SS :toast:

Playing with a FX57 now I see...

Got tired of the FX60? I'll take it if you don't want it anymore lol

Anyway nice results man.

Congrats on sub 21 minutes, i ain't gonna get ya there. :toast:

hehe thats the trouble with sub 0 its never enough

to know your chip will go faster if you could go that lil bit colder

ps you took ya time going phase

baz

thanks guys

yes it's been a long time waiting for Kayl's Black beauty to be built hehe

ugp, fx-60 on sub zero will come later :D

I wonder how far i can push my HIS X1800XT did 44,443 3dmark2001 with FX-60 @3109Mhz on water :)

Exelent work eva2000 :toast: :)

nice fx57 *0516* & SS ...eva 2000 :)

nice unit and nice work;)

nice bench there eva2000. Some really nice Spi times there.
They are some nice die temps ya getting there george for a fx and a small single stage cooler:toast:

Quote:

---

Originally Posted by kayl

nice bench there eva2000. Some really nice Spi times there.
They are some nice die temps ya getting there george for a fx and a small single stage cooler:toast:

---

oho....really good spi times....I had some test on 154 and same frequency and settings, but you gave me so much seconds....(i was slightly above 21 min)

I expected lower temp for the core...Kayl is correct accordin to you ? I expect something about -25 idle

Thank guys

well Kayl says this Black Frozen SS is 1/4HP 8cc compressor with 404a - not sure what that means compared to other compressors and phase change setups but it's meant to be small ?

yes....possible....my setup is 1/2 HP and 402 (but have to check with Dimas...don't want to say silly things..:D)

Quote:

---

Originally Posted by eva2000

Thank guys

well Kayl says this Black Frozen SS is 1/4" 8cc compressor with 404a - not sure what that means compared to other compressors and phase change setups but it's meant to be small ?

---

It's 1/4hp ;) 8cc is the displacement of the compressor making it slightly smaller than the compressors used in the U.S. version of the mach2 (9cc). Those are great temps with such a small compressor and "just" r404. Nice job guys! :toast:

i feel silly must of been using water cooling too long LOL :doh:

Here's some load tests with less vcore applied (thus colder temps heh)

FX-57 @13x233HTT = 3029Mhz at 1.504v vcore

Room temp = 23.7C
Compressor with probe on top = 40.8C
Evap idle = -42.6C
MBM5 idle = -24C to -22C

http://www.fileshosts.com/DFI/NF4_SL.../cpuz_idle.png

Cpu Burn K7 load test = MBM5 / Evap
load after 1 min = -4C / -38.4C
load after 3 min = -3C / -37.6C
load after 5 min = -3C / -37.3C
load after 12 min = -3C / -36.8C (compressor temps now at 42.5C)
load after 17 min = -3C to -2C/ -36.6C (compressor temps now at 43.6C)
load after 28 min = -3C to -2C/ -36.5C (compressor temps now at 46.5C)

good....perhaps you can lower that 1.504 for 3 gigs only....

oh i deliberately set at 1.504 to give it some extra load hehe

ehe.....I saw your reply but I thought was a reply to a PM

:D:D

no problem....i can understand

replied to ya pm heh

Tried same load test but at 14x250HTT = 3500Mhz at 1.62v

Room temp = 24.4C
Evap idle = -40.0C
Compressor = 50C
MBM5 idle = -19C to -18C

http://www.fileshosts.com/DFI/NF4_SL.../cpuz_idle.png

Cpu Burn K7 load test = MBM5 / Evap
load after 1min +5C / -36.0C after that BSOD hehe guess enough to be 32M stable but not Cpu Burn K7 load stable :)

ehe....not below 0 anymore.....:(

ya ....read the PM...I'll try for sure...thnx !

Tried upping vcore from 1.62v to 1.65v

Room temp = 24.5C
Evap idle = -40.0C
Compressor = 51.1C
MBM5 idle = -19C to -18C

http://www.fileshosts.com/DFI/NF4_SL.../cpuz_idle.png

Cpu Burn K7 load test = MBM5 / Evap
load after 1min +6C / -37.1C
load after 2min +7C / -34.4C
load after 3min +7C / -33.4C
load after 4min +7C / -33.2C
load after 5min +7C / -33.0C - BSOD at 5mins 3s just before i took a screenie.

First Pcmark04 run with single 256MB BFG 7800GTX @473(525)/1350 with FX-57 @14x250HTT = 3500Mhz with MBM5 runnning in background logging temps and voltages :)

Pcmark04 = 6,849
http://service.futuremark.com/compare?pcm04=3236859

click on below image for full screenshot :)
http://www.fileshosts.com/DFI/NF4_SL...unning_tnn.png

Is that all ... ???
an FX-57 we`ve han a while ago was CABCE 0516WPMW ... clocked to 3.92GHZ on DI though

Quote:

---

Originally Posted by TaPaKaH

Is that all ... ???
an FX-57 we`ve han a while ago was CABCE 0516WPMW ... clocked to 3.92GHZ on DI though

---

And could pass PCMark ?
I don`t think so

to Cooper
Well ... it passes 1M @ that freq ... :D

@ eva2000

woot!!! the no cold bug FX-57 0516WPMW!!!
give her some DI :up:

Great to see you finally subzero-cooling, George :up: Temps are somewhat high, though...

They aren't too high for a 1/4HP compressor, are they?... ;)

Quote:

---

Originally Posted by before

They aren't too high for a 1/4HP compressor, aren't they?... ;)

---

... missed that part from George's thread is Phase change :wasntme: I take that back then :D

Thanks.. yeah not bad for 1/4HP heh :D

Very happy as i was stuck at 3109-3150Mhz on water for all my AMD64 cpus, Opteron 146, 148, FX-57, FX-60 hehe and 2950mhz on Opteron 170.... but now thanks to Kayl this will change :)

Good thing is compressor runs cool, no condensation = nice 24/7 cooling solution - already ran it for 16+ hr runs three times this week with no probs :)

Just plucked in my 2nd 256MB BFG 7800GTX for some SLI fun :D

Quote:

---

Originally Posted by eva2000

Good thing is compressor runs cool, no condensation = nice 24/7 cooling solution - already ran it for 16+ hr runs three times this week with no probs :)

---

Hey, what are you trying to imply????:p: I could run my unit for 16+ hours straight too, but I'd end up with an iceberg the size of the one that sank the Titanic on my mobo :D

Quote:

---

Originally Posted by s7e9h3n

Hey, what are you trying to imply????:p: I could run my unit for 16+ hours straight too, but I'd end up with an iceberg the size of the one that sank the Titanic on my mobo :D

---

LOL you call that condensation ? more like motherboard artic glacial formation :D

how's this 3dmark05 score with single core AMD64 cpu and 2x 256MB BFG 7800GTX SLI @473(525)/1350

FX-57 @3501Mhz
= 15,338 http://service.futuremark.com/compare?3dm05=2054959

http://www.fileshosts.com/DFI/NF4_SL...0_15338_tn.png

Compare this to dual core cpu

FX-60 @3001Mhz with 2x 256MB eVGA 7900GT CO SC @590(610)/1827
= 15,625 http://service.futuremark.com/compare?3dm05=1954967

FX-60 @3061Mhz with 2x 256MB BFG 7800GTX SLI @501(551)/1386
= 15,409 http://service.futuremark.com/compare?3dm05=1897498

But already managed to beat my FX-60 BFG 7800GTX SLI score of 15,409 with 11mhz less on GPU and 18mhz less on Vid memory

3dmark05 = 15,442
http://service.futuremark.com/compare?3dm05=2055087

http://www.fileshosts.com/DFI/NF4_SL...0_15422_tn.png

:cool:

hmm wouldnt the fx60 be more productive under your ss in 3dmark 05?

maybe... will get around to my Opteron 170 and FX-60 on Kayl Black Frozen SS soon ;)

Just testing each of my cpus first hehe

really nice clocking you're having....I really comprehend your enthusiasm...I'm living the same feeling with my 1st phase change..:D

ehm...soon you'll have a nice PM about pi32 times....:) have to offer you a beer ?
:D

regarding 3dmark scores....i had some test in the past on 1900xtx card and I was missing 300 pts with a 3700+@3 gigs vs. x2 4400@2800....so your dual cores setup should grant you some extrapoints...and if not coldbugged....also some more satisfactions..:D

Very nice work George! Very clean screenies... :)

thanks guys... now to Opteron 170 or FX-60 next, if i do FX-60 first it probably dampen my experience with Opteron 170 though hehe... but Opteron 170 10x cpu multiplier will limit how far i can do on the board HTT wise which this board is around 334-344HTT AFAIK

Did a fresh winxp pro sp2 fully updated install and redid 14x251HTT = 3514Mhz 32M run to see if i could improve :)

WinXP's screensaver mode nearly cost me my new PB when i saw the screen black out at 23rd iteration! Lucky i moved the mouse before trying a manual reboot hehe...

Old PB
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

New PB
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

Improved by 0.703 seconds :D

george you need to tweak something else or to increase freq to have better time....

Yeah, anyway forging ahead with 5.719 seconds faster 32M time :)

http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.png

Problem is load temps are a tad too high at +6C to +8C heh

Very nice 32M. Wil you run 2001 with the FX57?

yeah later though 7800GTX's don't show off well in 3d2k1 though... my X1800XT is back on air so no 810/963 clocks on water hehe

good good good......I had to stop at 254x14 and 20min 34"....i'm still near zero or below...but too hot anyway

thanks yeah heat our #1 enemy hehe

Okay here's a Pcmark05 run seems low score but guess it's about right for single core AMD64 cpu :)

Pcmark05 = 6,313
http://service.futuremark.com/compare?pcm05=385436

FX-57 @3501Mhz
DFI NF4 UT SLI-DR R.AB0 1114-3 bios
2x 256MB BFG 7800GTX stock hsf SLI @493(541)/1370
3x 80GB Hitachi 7K80 SATAII raid 0

http://www.fileshosts.com/DFI/NF4_SL...13_5919_tn.png

Pcmark04 = 6,889
http://service.futuremark.com/compare?pcm04=3237533

http://www.fileshosts.com/DFI/NF4_SL...89_7406_tn.png

3dmark05 = 15,548
http://service.futuremark.com/compare?3dm05=2057420

http://www.fileshosts.com/DFI/NF4_SL...7_15548_tn.png

3dmark2001 = 41,662
http://service.futuremark.com/compare?2k1=8989854

http://www.fileshosts.com/DFI/NF4_SL...0_41662_tn.jpg