x2 3800+ s939 Adventure.

So whats on the menu for today?

WC Gear:

Swiftech MCP-655
Swiftech Storm G4
Black Ice Extreme III Rad / 3x Antec ajustable fans from my p180
Swiftech Micro Res

-----------------------------------

Hardware:

Opteron 148
x2 3800+ - LCBIE 0618EPMW :woot:
DFI LanParty UT NF4 SLI-DR eXpert
Nvidia 7800gtx
2x512 Corsair Value Select

-----------------------------------

Where the hell are my tracers?

I sold my balistix to JeB, they have just started to die (balistix syndrome) and i feel like **** because he only had them for a month.

-----------------------------------


Photo's:

http://users.on.net/~bitto/image/030...o/DSCF0017.JPG
http://users.on.net/~bitto/image/030...c/DSCF0014.JPG
http://users.on.net/~bitto/image/030...c/DSCF0015.JPG

-----------------------------------

x2 3800+ fun :D

Stock:
http://users.on.net/~bitto/image/030...x23800idle.JPG

Now let the games begin :thumb:

-----------------------------------

3000Mhz
http://users.on.net/~bitto/image/030...6v-dual32m.JPG

3100Mhz
http://users.on.net/~bitto/image/030...dle-3102.5.JPG

-----------------------------------

Suicide Valid @ 1.520v:
http://valid.x86-secret.com/show_oc?id=97726 - 3201.37 MHz

-----------------------------------

Tomorrow I might do some 3dmark runs, but i'm really just waiting to get my hands on some decent ram :)

Nice clocks with some nice voltage. :)

What's up with the temps? Also which voltage does 3.1 need to be stable?

Looks like a good one, LCB1E is coldbugged territory, basically a CCB1E 170 with less cache, even says Toledo instead of Manchester. Nice clocks.

*What divider are you running? Seems a might excessive, but i've done that too when i'm testing a CPU for max clocks ;)

Quote:

---

Originally Posted by Absolute_0

What's up with the temps? Also which voltage does 3.1 need to be stable?

---

Nfi whats going on with the temps, could just the the expert playing up.

But yeah it is a bit weird, here are my temps with the opteron this morning before I put in the x2 - Idle Load

I didn't try pushing any more then 1.525v into it :), but it was not stable. I can super pi 1m @ 3.1 np's...thats about it.

Quote:

---

Originally Posted by Absolute_0

Looks like a good one, LCB1E is coldbugged territory, basically a CCB1E 170 with less cache, even says Toledo instead of Manchester. Nice clocks.

*What divider are you running? Seems a might excessive, but i've done that too when i'm testing a CPU for max clocks ;)

---

Good eye @ the Toledo ;)

Div 100, hahahaha yeah i'm just testing for max clocks so I dont care about the pi runs :)

LCB1E 0618 EPMW ?

Man those are some nice clocks with low voltages !!!

Nice B1 chip! Yes it really is a Toledo with disabled cache, the 1st C means dual core 1MB cache per core :)

Quote:

---

Originally Posted by Repoman

Nice B1 chip! Yes it really is a Toledo with disabled cache, the 1st C means dual core 1MB cache per core :)

---

Hi, i have the same x2 3800+ 0618 RPMW and in 1 day of testing i get 3100Mhz whitout to much stress, but my temp are to high, because here in Portugal Ambient temp are 31/35ºC :p:

BTW what voltage did you use to get 3200Mhz ??? :confused:

Quote:

---

Originally Posted by Absolute_0

What's up with the temps?

---

Expert underreports temps by 8-10C.

Quote:

---

Originally Posted by Counter CS

BTW what voltage did you use to get 3200Mhz ??? :confused:

---

Sorry I forgot to mention that :), 1.525v was used at the time of submiting it for validation.........and then it hard locked about 2mins later lol :p:

Quote:

---

Originally Posted by leca

Sorry I forgot to mention that :), 1.525v was used at the time of submiting it for validation.........and then it hard locked about 2mins later lol :p:

---

Damn, that's good. You might be able to get it stable / benchable at 3.2 GHz with around 1.6V.

Quote:

---

Originally Posted by IvanAndreevich

Damn, that's good. You might be able to get it stable / benchable at 3.2 GHz with around 1.6V.

---

Yeah hopefully, I'm just unsure of max safe v's to use atm :)

http://users.on.net/~bitto/image/030...ffsetcache.JPG

Well, I ran my X2 3800+ at 1.625V for 5 months on Big Typhoon, so I think 1.6V on good water is more than a safe bet as long as temps are OK.

I'll give it a whirl later today. Thanks IvanAndreevich :)

Just to let people know, there has been some confusion a few people seem to think this is a LCB1E 0618EPMW.

It is not a 1, it is a LCBIE 0618EPMW ;)

that's a really good chip there - don't think my X2 will do cuz it
is one of the old '05 not a new one :(

Hey Leca what´s Tcase Max of your X2 3800+???

Look at the SreenShot!

http://img297.imageshack.us/img297/5...800rpmw9jo.jpg

Very nice clocks but those temps can't be right.
What was your room temp?

Quote:

---

Originally Posted by Zeus

Very nice clocks but those temps can't be right.
What was your room temp?

---

What temp are you talking about ???

About Leca's CPU temps.

I have an DFI expert too and i can tell you that the temp is not right, it show -8/-10ºC.
In the last oficial BIOS there is an Option to correct the temp "adding +1 at +15ºC you must activ that option and use +8ºC to correct the temp showing on SG :fact:

Quote:

---

Originally Posted by Zeus

Very nice clocks but those temps can't be right.
What was your room temp?

---

Yeah the temps seem to be stuffed when using this cpu compaired to my opteron 148.

Room temp was around 17-19c :)

Quote:

---

Originally Posted by Counter CS

Hey Leca what´s Tcase Max of your X2 3800+???

---

When I get home from work i will upload and image of that for you.

Quote:

---

Originally Posted by leca

Yeah the temps seem to be stuffed when using this cpu compaired to my opteron 148.

Room temp was around 17-19c :)



When I get home from work i will upload and image of that for you.

---

You already posted that here, sorry for ask.

Quote:

---

http://users.on.net/~bitto/image/030...ffsetcache.JPG

---

:stick: :slap:

Nevermind then ;)

I managed to get my hands on another one of these exactly the same *drool*

The second one :woot:

http://users.on.net/~bitto/image/030...6v-dual32m.JPG


--------------------

Super pi 1m - 3103.0MHz:
http://users.on.net/~bitto/image/030...56v-dual1m.JPG

--------------------

Suicide Valid @ 1.520v:
http://valid.x86-secret.com/show_oc?id=98279 - 3307.37 MHz

--------------------

Seems like this cpu is a slighty stronger :), but apart from that they are exactly the same.

Thanks everyone for your support ;)

Not bad at all, but you need better rams :p:

Very nice clocks

Look at the CBID shot: CPU Version 4.3 heh, never seen that before (weren't x2 3800 E6 all 4.1?). Brand New. :D

Hey Leca what´s the stepping of the 2nd x2 3800+ ?

This my X2 3800+ LCBIE 0618 RPMW (3100 rpm :D )

http://img296.imageshack.us/img296/3710/cntrb8go.jpg

The stepping is exactly the same on both :)

I had chance to test this chip,

i PLANNED TO USE IT On my Phase but it cold bugged anywhere over 240 FSB.:cool:

As seen on water it ROCKS!!

Dual PI32M @ 3Ghz 1.5vcore :woot:

http://img144.imageshack.us/img144/3...pi32mxs8bn.jpg

MAte some awsome results,

My LDBHE on phase can do 3200mhz 1.6v Solid, this chip however on a decent Water setup would do better than my Phase.

Dam i hate the cold bug.

3100Mhz 1.6v WC :fact: http://valid.x86-secret.com/show_oc.php?id=97767

Quote:

---

Originally Posted by Counter CS

3100Mhz 1.6v WC :fact: http://valid.x86-secret.com/show_oc.php?id=97767

---

Yeah i seen it dude, is that Prime and game solid.

Quote:

---

Originally Posted by 4Qman

Yeah i seen it dude, is that Prime and game solid.

---

Naah! Thas only a Suicide Shot, like this one made 10min ago
:fact: http://valid.x86-secret.com/show_oc.php?id=99460

Mate thats v impressive. I had 6 of these chips now all different steppings. Apart from the LDBHE not having the cold bug this one is the best clocker.

I just cant help imagining what it would do on phase mate.

Nice clocks tho mate, This was on phase LDBHE stepping
http://valid.x86-secret.com/show_oc.php?id=90205

Looking good :banana:

I wish I could of got my second one on phase :(, oh well.

Hehehe :D X2 3800+ water-cooled :woot: 3140Mhz 1.63v :eek: 38ºC

http://valid.x86-secret.com/show_oc.php?id=99535

i just got some LCB1E 0619 RPMWs in.... if this thread is any indication, this is going to kick some tail!

dave

Defo get some results posted mate, what cooling u gona be using.

My overclocking was with RAID0 setup :fact:
Maybe if i use only one disk Sata i can go higer :confused:

Quote:

---

Originally Posted by 4Qman

Dam i hate the cold bug.

---

Tell me about it...I tried to boot my 3800+ ADBHE and seems that although the CPU may not be cold-bugging, the mobo is....1C lower than this and the mobo just shuts itself off :rolleyes: Cpu @ 1.72V:

http://img90.imageshack.us/img90/3252/724mo.jpg

arrr,

Altho im sure id cry under -70oC lol.

also got a LCBIE 0618EPMW today! gonna see what i can do

It was played with new X2 3800 +. Here the first results of that that has left.
2600 at stock V, Tt Big Typhoon
http://img241.imageshack.us/img241/5452/32mhm0.png
Certainly, I do not apply for a world record, but амд again proves, what even being in crisis, it is quite capable to supervise lowend. Cost of data проца at us is in area 150 $ and in my opinion to opinion, for economical clockers it is number 1! I shall shortly continue tests.

http://img241.imageshack.us/img241/1...8062700mb6.jpg
ahh 2700mhz on stock volts.. LCBIE 0618EPMW
would go farther but i need some better ram before i proceed

I got the LCBIE 0618EPMW Too, Awesome Stepping..

Right now its stable on air @ 2.7 /1.38v

Going h2o soon.

Awesome clocks man. You sure got your money's worth!

another LCBIE 0618 EPMW here

mine is naked @ TT BigTyphoon w/stock fan
24/7 folding and gaming rig @ 3020mhz 1.550v
haven't even tried for 3200mhz yet, maybe will later today:D

http://img111.imageshack.us/img111/5...sp1mpa2.th.jpg
http://img181.imageshack.us/img181/5...9hrszc7.th.jpg http://img237.imageshack.us/img237/7...dm05za3.th.jpg http://img58.imageshack.us/img58/999...dm06ra6.th.jpg http://img181.imageshack.us/img181/8...dm03ef9.th.jpg