Pinmod@Conroe E6700 Vcore 1.45v by air cooling

Pinmod@Conroe E6700 Vcore 1.45v by air cooling
S775 Table

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD1.jpg

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD2.jpg

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD3.jpg

Platform
M/B ：MSI 975X Platinum
MEM ：Corsair DDRII 8000UL 512x2 Dual Channel
HDD ：Maxtor 300g SATAII 16Mb Cache
VGA CARD ：NV 7600GT
POWER: Enhance 650W
OS ：WIN Sever2003
CPU COOLER：Tower 120
CPU ：Intel Core 2 Duo E6700 : 2.67G (266x10)/FSB 1066/L2 4MB

Conroe E6700@Pinmod Vcore 1.45v
3.39ghz@spi1M

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD1.gif

Single SP2004 Large setting 9

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD2.gif

double SP2004 Large setting 9

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD3.gif

running 10mins ago

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD4.gif

attention:pinmod is worked but RISK

Nice !! now get som LN2 on that baby and break some WR !! :D

P.S. enjoy reading alle the treads u make !

And what exactly this pin mod does?

what is your temps with that much vcore?

3.4 on air with a simple pin mod, good stuff

Oh yeah, good question, what idle/load temps?

running half an hour

http://coolaler.kj.idv.tw/conroe/E67...OD/PINMOD5.gif

a little stable:toast:

Quote:

---

Originally Posted by georgesod

And what exactly this pin mod does?

---

Increases vCore.. :)

Nice result coolaler.

Nick

terror!!!
add spi32M

http://coolaler.kj.idv.tw/conroe/E6700/PINMOD/1.JPG

:O amazing info there... now turn op a other board ;)

Hey coolaler do you think water cooling might help the overclockability of this babe?

Quote:

---

Originally Posted by georgesod

Hey coolaler do you think water cooling might help the overclockability of this babe?

---

I believe temperatures are not limiting these conroes right now.

awsome results :d

Sorry for being a noob, but how is pin modding better than just changing VCore in the BIOS...?

Suman

Well, for one, it can be good when the bios has no such options :)

-k0nsl

Quote:

---

Originally Posted by Sumanji

Sorry for being a noob, but how is pin modding better than just changing VCore in the BIOS...?

Suman

---

Great Stuff Coolaler. :toast:
You are a XIP of the highest level. You really walk the walk and not just talk the talk.

Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2! Ln2!

:)

thats stable enough for me... Lets see higher clocks on AIR :).

Thanks for doing all this work/testing, I really enjoy reading all the stuff you post. You do much more in-depth work then the rest of the Conroe owners :)

looks good

http://coolaler.kj.idv.tw/conroe/E6700/PINMOD/2.JPG

1.45v, aircooling, 23c? What ambients? If those temps are right that's ridiculous.

Wow, nice temps for the voltage / clocks. What are your ambient temps?

12v looks a bit high.:rolleyes:

14.9 spi 1m on regular air is fantastic. The numbers seem surreal anymore.

Great stuff!

Push It!!!!

Wasn't this at 3.9 with default vcore in another thread by you coolaler? Time for some DICE/LN2?:confused:

ln2 & Vcore1.45v

http://coolaler.kj.idv.tw/WR/4098_1.gif

Is this the daily break my own wr post? LOL :D

He shoots... he scores!!!!

http://coolaler.kj.idv.tw/WR/3.JPG

according to Intel 975xbx , conroe isn't COOL.
when 1.55v(actual volt.), temp=78c~85c loaded.
Tower120+3*1238 papst, XS Air cooling :D, ambient=20c.
the temp shows in MSI/ASUS bios might be to low.

Updated:

Perhaps we are finally starting to see the curve leveling out. It had to happen sometime, but I'm sure it still has a ways to go.

You know, every time I see that curve, I smile...

I'm so looking foward to a new CPU (about darn time for me)

Quote:

---

Originally Posted by dogsx2

Is this the daily break my own wr post? LOL :D

---

heheheheh



nice one coolaler :toast:

Quote:

---

Originally Posted by iterations

Updated:

Perhaps we are finally starting to see the curve leveling out. It had to happen sometime, but I'm sure it still has a ways to go.

---

maybe because ram isnt getting better.

awsome results coolaler, increase vcore and put it under ln2 again :)

clock like a Prescott
cool like a Yonah
SPi like a CONROE
Take low temp like an INTEL PROCESSOR


Intel should give coolaler unlimited lifetime LN2 supply:)
1.45volt is no where near limit
take it higher

WOW:clap::eek: :clap:

i just want to get my conroe when i get one 2 4ghz that would be sweet.

Quote:

---

Originally Posted by coolaler

ln2 & Vcore1.45v

http://coolaler.kj.idv.tw/WR/4098_1.gif

---

the OS is win xp sp2
my sever 2003 crush

Quote:

---

Originally Posted by coolaler

the OS is win xp sp2
my sever 2003 crush

---

Show us! :toast:

Quote:

---

Originally Posted by coolaler

http://coolaler.kj.idv.tw/WR/3.JPG

---

Amazing!

phase + 1.55v with a E6700 would definately be 4.2Ghz :D

Quote:

---

Originally Posted by coolaler

the OS is win xp sp2
my sever 2003 crush

---

Hi, great result man ;)

Have you actually tried my tweak to disable 1 core? And if so, did it help you any?

Maybe you have to combine my tweak with this if it didn't work: Go to device manager and update the cpu driver under "computer" from ACPI multiprocessor to single processor, I'm sure you know how to do this ;)

Good luck with benching, I can't wait for you to pin-mod your way up to 1.6v :toast:

Great stuff!!! :clap: :clap: :clap: :clap: :clap:

Quote:

---

Originally Posted by freecableguy

phase + 1.55v with a E6700 would definately be 4.2Ghz :D

---

From what I have seen with Meroms - 1.55V "might" be way too hot for Conores as well

Quote:

---

Originally Posted by freecableguy

Countdown until XS.org sees Intel Core 2 Extreme "Conroe XE" ES: 6 days...

---

Ok so when did this count down actually started? Cause without a starting date it is always gonna be 6 days :) :banana: :)

Still 23C? On air wow I like Core 2 very much... :D

Edit: and a special thanks to iterations who keeps those scores on a nice graph...

Quote:

---

Originally Posted by alexio

Hi, great result man ;)

Have you actually tried my tweak to disable 1 core? And if so, did it help you any?

Maybe you have to combine my tweak with this if it didn't work: Go to device manager and update the cpu driver under "computer" from ACPI multiprocessor to single processor, I'm sure you know how to do this ;)

Good luck with benching, I can't wait for you to pin-mod your way up to 1.6v :toast:

---

I did single core already
but it's no fast than dual core,I thought

I find difference CPU, Vcore difference either
my another chip E6700 default Vcore is 1.324v:D

Did you test the other chip too yet? I think we might see 11.xx tomorrow...

Quote:

---

Originally Posted by coolaler

ln2 & Vcore1.45v

http://coolaler.kj.idv.tw/WR/4098_1.gif

---

how about a nice 32M time for us next :cool: since you are pretty much halving my SuperPi times and all heheheheheh

Nice!!

Oh superb coolaler.Every morning wehen i come from work i see another WR from you. When will you get the 4,5Gig on LN2?

yeah lol. Time for the daily "WR Breaking" thread. How does it score in 3dmark05 at 4ghz?

Amazing !!!

Very nice Coolaler . Up the vcore ... we want a new WR ! :D

nice !conroe is great!!!:banana:

Why you set vcore with pins only to 1.45v ?
First probe or something serios that do not apply to use higher voltage in that way ?

Cooaler where do you live ? /me wanna steal youre toys :D

Taichung, Taiwan he said, I bet you'll have to fly a lot to go there :D

congratulations for that amzaing score, you're really pushing the enveloppe with those conroes ! :toast:

so, you can up that vcore to 1.6, what's holding you back ? :)

wow, really impressive results! :toast: congrats from germany!

1.6v would be very high on a Aircooled setup considering how low the starting volts are.

I don't even run my 4400+ over 1.56v daily or 1.64v benching.

1.6v on Conroe might be fine for LN2 but I wouldn't do that on air IMO

^^ all depends these are loosly based on p6 core. the tually p3's could take 1.7v 24/7 from what i remember.

wow that's awesome stuff - I liked cpu pinmods long time ago, I think we all gonna like them soon again :D
great information here - thanks.

Quote:

---

Originally Posted by Evilsizer

^^ all depends these are loosly based on p6 core. the tually p3's could take 1.7v 24/7 from what i remember.

---

Don't forget these are 65nm. Those P3 you speak of were 130nm. That makes a difference.