*OCM* BEFORE's FX-57 @4208MHz under 2 stager

Hi guys,

Ok, I feel that to be a little bit out of fashion in comparison to newer intels; BTW I'm more than happy today. This FX-57 seems to have been hand picked by God himself. :)

Actual chip is the one on the left.

http://img81.imageshack.us/img81/450...mwfx57b1lt.jpg

Quote:

---

SYSTEM

FX-57 CABCE 0516WPMW xxxx482xx0213
DFI nF4 Ult-D R.AD0 1114-3; 623-2BTA
2*256Mb BH-5 Corsair+Kingston (jmax_oc's hand picked modules!)
Gigabyte X800XL
Western Digital 80Gb
Windows XP Profesional SP2 (Tweaked)

---

Quote:

---

COOLING

2*1HP Rotary
First stage: R290
Second stage: R170

---

Quote:

---

SUICIDES @ ~ -100°C Evap

4208MHz@1.86V

Very very difficult to get something at that clock... :(

http://img199.imageshack.us/img199/9243/cpu42089kx.jpg

4170.06MHz@1.86V

http://valid.x86-secret.com/show_oc?id=94127

---

Quote:

---

SUPER PI

1M

http://img445.imageshack.us/img445/9...u1m37968dk.jpg

32M

http://img129.imageshack.us/img129/2...32m37014co.jpg

---

Be sure that I'll try to do some benchies with higher clocks but my cascade has got some trouble with loading temps at that level. :rolleyes: A third stage or at least better refrigerants might be required.

The chip is cold-bugged at about 240HTT @ -50°C core.

Best Regards,

Xavier :toast:

So nice Before !

:woot:

hehe that's a WR mate :)

We expect a validation now, but i'm sure you'll got it very soon :)

:banana:

Great job with this golden FX57 :toast:

Nice results. :slobber:
It's nice to see some AMD clocking results in these days of conroe/merom agony. :D

Nice results, thats got to be fiddly with the coldbug and such a powerful 2-stager benching. Loving the suicide though.

french overclocking poowwaaaa !!! :banana:

just congratulation Before :toast:

nice results
but can you bench some better 1M result?
i bet you can pi 1M with 4ghz++ and that always nice
anyways, congrats

Amazing work man.. hopefully we can get a CPUz validation link soon :slobber:

That's impressive!
Holy 0516 you have there.
Congratz for the suicide shot and also SPI.

I hope that my 0530 like the cascade cooling too:D

Natchy questi spaccano di brutto!
Great cpu... and great numbers here...
Grats for the score!
That's the french style? :D
:D

Yes it is :D

Great cooling, great CPU, and.. :)

50% FX-57 OC barrier broken !
Congratz, mate !!!
Waiting for 4.2GHz validation :D

Quote:

---

Originally Posted by quent

Yes it is :D

Great cooling, great CPU, and.. :)

---

... and *OCM* powwa!

Thanks all!

@GoThr3k: Despite of the power of this cascade, I'm a little bit pessimistic about benches at 4.0GHz :)

@nn_step & TaPaKaH: Of course, I had wished to get one... BTW what those validations really mean when you see some awful fakes ranked by CPU-Z records. :( However, I'll try my luck again :D It's just a matter of good temp...

@nachtymnen: I'm sure your 0530 will perform very well! ;)

:toast:

Congrats again. :toast: :D\


How about a higher multi? Is it available? Never had the pleasure of playing with an FX myself...

Great Job Before! Congrats with the WR suicide!

good job before

try with R1150 when you can :)

before that is just sick

It's amazing, Congrats Before :woot:

man that's great;) nice work

congrats before :D
amazing chip you have there :toast:

:slobber:

Thank you guys! :)

@Gautam: Thx again buddy! ;) In FX all multis are available. I can come to dark side now :D

@skirms: You're right bro, R1150 will be so sweet; please let me know when you receive some, I'll be on. ;)

Thats it I hate you before how in the hell can I catch that :(

Great work mate this will be a hard one to beat :toast:

Quote:

---

Originally Posted by before

@nachtymnen: I'm sure your 0530 will perform very well! ;)
:toast:

---

hehe, I hope to close a PI 1M over 3.8GHz...I don't need other:D
Congratz again for the WR!
4.2GHz for an AMD it's absolutely amazing.

Do you have the possibility to try this chip under LN2?
Can you imagine the 4.3GHz?:D

@fatty: I'm sure your chip can do better with a tweaked OS dude... If I correctly remember, your 4GHz screen was performed with an standard windows.

@nachtymnen: I don't know; may be ;) BTW I'll check some R1150 for second stage and higher clocks might be possible. :D

Great results! :toast:

Did u tested this FX under a mach or vapo before? What was ur result there? :)

Thx!

I've only tested it under water; just enough to pass OCCT at 3GHz with stock volts (38°C while loading).

This chip was C3's one; he may be able to answer you. BTW I don't know if he tested it under single stage phase.

Wonderful work there :toast: Too bad I can't say I supplied that cpu ;)
Just one question though - how come there's such a difference in core temps from the first pic to the second?

Thx :)

The Spi32M was done with MPS multi processor drivers to fight cold-bug because they give extra heat load.
The setup won't even boot with divers for RAM clock higher than HTT. After all, i've used A64info to change dividers under windows and didn't need MPS drivers anymore.

Quote:

---

Originally Posted by before

Thx :)

The Spi32M was done with MPS multi processor drivers to fight cold-bug because they give extra heat load.
The setup won't even boot with divers for RAM clock higher than HTT. After all, i've used A64info to change dividers under windows and didn't need MPS drivers anymore.

---

But why would you use MPS Multi when running 32M and not 1M? I would think 1m would be harder to run without the tweak.
Using upclock dividers shouldn't be a problem even with the cold-bug. Cold-bug only limits HTT, and not mem speed ;)

Awesome FX-57 You have :toast:

I haven't thought that 0516 can go so high with so cold evaporator ...I have rather thought that is work for 0530APMW ..I was mistake :D

Regards
Peter

Quote:

---

Originally Posted by before

Thx!

I've only tested it under water; just enough to pass OCCT at 3GHz with stock volts (38°C while loading).

This chip was C3's one; he may be able to answer you. BTW I don't know if he tested it under single stage phase.

---

Thank u too! ;)

It seems, that this cpu really likes the cold! My friend wrote C3 a PM about the results under single stage... it is just the question, if his FX55 0516WPMW scales like this 57 with the cascade. He did a validation today, with a mach2 and 3800MHz, with about +5°C. I think this cpu has potential, with the two stage cascade he will recieve the next week. :)

http://valid.x86-secret.com/show_oc?id=94717

Quote:

---

Originally Posted by funkflix

Thank u too! ;)

It seems, that this cpu really likes the cold! My friend wrote C3 a PM about the results under single stage... it is just the question, if his FX55 0516WPMW scales like this 57 with the cascade. He did a validation today, with a mach2 and 3800MHz, with about +5°C. I think this cpu has potential, with the two stage cascade he will recieve the next week. :)

http://valid.x86-secret.com/show_oc?id=94717

---

He need to do his best again......:p: 0516WMPW too

under single stage default vapo Ls :D
http://valid.x86-secret.com/show_oc.php?id=57664

http://valid.x86-secret.com/cache/57664.png

Love that first pic, looks like you found a nice one Before :)

let me decode that bad boy:D
"1241482E50213"....Nice job buddy!!;)

my jaw droped!

Go for 4.5 :)

Nice one man ! :banana: =D. And to know that everyone was trying for 4Ghz only a few months ago with the same hardware =D

@s7e9h3n: In fact, I've found how to change the upclock dividers thx to A64Info freeware after running 32M. Thus the use of MPS was not needed anymore for running 1M. ;)

@piotres: Thx buddy :toast: This FX-57 is really a great clocker. BTW It doesn't seem to have a unique memory controler, but can I be sad? Guess not! :p:

@funkflix & Rol-Co: wOOt! That's a good FX-55 0516WPMW; I've owned one with core serial #484 but it didn't clock higher than 3705MHz suicide @-61°C core (it would do a little better with a tweaked OS, but just for few MHz). This FX-55 was also out of breath downwards -50°C core.

@G_H_Z: Thank you! That's lucky, I didn't expect to clock that high :p:

@OPB: Thx bro! It seems me that you've decoded it right... I haven't really think about making it unreadable, but about highlighting both core & batch #

@bri1 & farsky: Thank you guys :toast:

4.2GHZ on AMD FX is sick!
I'm not even waiting for the valid link because I never validated an OC in this way on my own :D
good luck on getting benches >4 GHZ - I'm sure you will handle this :)

Great work before :D

@SoF: Thx mate! Actually I'm waiting for R1150 for benches over 4GHz :D

@ncsa: Nice to see you here buddy! Thanks for your support! ;) (sweet avatar you've got here...)

congratz Before with your WR, really an awesome chip you got there. I cant wait for the 3D benshes :D

damn! 4.2ghz fx.. congratz! :toast:

LOL @ SPi, my 3.1ghz yonah @ 19.xxs

damn u intel.. lol :D

Good job m8

OCM rocks :D

Nice job man, hope I can reach the same limits with a 0530.
Concratz on the WR ;)

Very nice job my friends !!!! :)

great result, keep up the good work !!!

Thank you guys :)

@boblemaginifique: Yeh buddy, it's quite interesting to note, as you know, my FX-55 0516WPMW wasn't as a great cloker as this FX-57 0516WPMW, but was a far better memory controler... ;)

Here's my last bench because I wasn't able to find better refrigerants... I've decided to sell the chip as I need money for Conroe ;)

http://img342.imageshack.us/img342/8...u10k23s3jq.jpg

makes me a bit upset as I would have loved to see 4 GHZ 3DM01 with this chip :D
But if you can get this out of FX I'm sure you will rock on Conroe OC :D

OCM'll rocks forever (hein mister!)

Looks like a very strong 57. Congrats on the OC - AMD still can deliver.