Printable View
Anyone tried these memories already? :up:
http://www.gskill.com/images/images_...ts/1600ECO.jpg
Homepage: G.Skill
Freq: 1600Mhz
Timmings: 7-8-7-24
Voltage: 1.35v :shocked:
Great memories hum? :D From 1.35v stock untill 1.65v they have much to scale on OC :yepp:
seems that Elpida has developed new Chips ( or an other brand, micron ? ), which need 0.3V less than Elpida BBSE etc..., waiting for some results there :D
look like very nice memories huh? :D
i think they will be one the best chooses for daily use users
Not expensive also, nice kit :up:
Yeah,price it's Ripjaws range.Quote:
Originally Posted by WaterFlex
Some testing found on Germany site:
DDR3 1760; 7-8-7-24,VDimm 1.44V
http://img2.abload.de/img/860dpvf.jpg
DDR3 1800; 7-8-7-24,VDimm 1.54V
http://img1.abload.de/img/901j5gz.jpg
6gb kit?
2x2gb kit
Nice :shocked:Quote:
Originally Posted by stasio
They should hit 2000 CL7 with 1.65 ~ 1.70v don't you think? :up:
:up: Can not wait to see some more testing result. Actually I didnt notice this ram could be good for OC before.
Images of the memory?A 1600 CL6 should be perfect at 1.4v if possible :)
Wow
ordered right now memoryc for just 115eu
Nice! Maybe I'll give it a try on my AM3 platform.
Lucky :p:Quote:
Originally Posted by hiwa
Post some oc screens :up:
looks more like Samsungs 40nm ICs that they announced a month ago...:)Quote:
Originally Posted by aslanwas
they were rated at 1.35v
I wonder if this mem would do cas 5 1400mhz on AMD AM3 platform...:)
It can be the new Hynix H5TC2G43AFR, it operates at 1,35V. also.
1600 cl7? :DQuote:
Originally Posted by Ramguy
i will get mine tomorrow, i'll post a few prints later on :up:
Good news! :up: Can you take a look under the heatsink? :DQuote:
Originally Posted by LinkinParkBoy
Awesome. Any chance you can see if these will do 1333 cas5, 1600 cas6 or 1800 cas6/7 @ or near 1.65v?Quote:
Originally Posted by LinkinParkBoy
as far as i know, elpida hyper have 1.35 jedec spec and undervolted superbinned bbse should have no probs with 800 7-8-7 too
I bit the bullet and ordered this kit. I will share my results when they arrive next week!
http://prohardver.hu/dl/s/cl.gifQuote:
Originally Posted by TheBlueChanell
Unbelieveable:slobber:
So how would "high voltage" affect these long-term? I suspect these are Elpidas new 40nm IC's and perhaps they aren't that tolerant to higher voltage for a 24/7 setup?
Well guys, i guess i will only have some results for you next monday, if i have the time for it. I got the MSI DG80 here with the latest BIOS, but it's freezing on me all over the place even with more vdimm :mad:.
I will test them with an ASUS P7P55D. I don't think these modules like the MSI or vice-versa. :shrug:
I have just ordered the kit, 98€ incl shipping, and i have MSI P55-GD65, hope they run without problems! I already have enough problems with my Patriot and Kingston kits on that board...Quote:
Originally Posted by LinkinParkBoy
I´m now testing the Eco at 1333Mhz. It doesn´t do CL5, i tried 5-5-5-15, 5-6-5-15 and 5-6-6-15, until the 1.65v mark but nothing. I´m now testing Cas 6 with 1.475v, running wprime. I will post some results later on :DQuote:
Originally Posted by TheBlueChanell
Hello. I can tell you that the experience with the MSI and this rams didnt went well. I couldn't even test them. I had random frezzes, possibly due to the fact that MSI doesnt release new bios for this board since September :shrug: I wish best of luck for you :\ I´m now testing with the Asus P7P55 Deluxe and it´s perfect ;)Quote:
Originally Posted by noxon
Some Gskill Eco tests :up:
DDR3 1333Mhz 6-6-6-15 1.47v WPrime 1024M
http://i214.photobucket.com/albums/c...1333Wprime.png
DDR3 1333Mhz 6-6-6-15 1.47v Everest
http://i214.photobucket.com/albums/c...333Everest.png
DDR3 1333Mhz 6-6-6-15 1.47v Sandra
http://i214.photobucket.com/albums/c...1333Sandra.png
DDR3 1600Mhz 6-7-6-20 1.46v WPrime 1024M
http://i214.photobucket.com/albums/c...1600Wprime.png
DDR3 1600Mhz 6-7-6-20 1.46v Everest
http://i214.photobucket.com/albums/c...600Everest.png
DDR3 1600Mhz 6-7-6-20 1.46v WPrime 1024M
http://i214.photobucket.com/albums/c...1600Sandra.png
Positives: :D
- They don't heat up
- Low voltage allow high OC margin
- Cheap
- Aggressive timings
- Great performance
- Best Buy
Negatives:
- Still have to find something :p:
I couldn't boot them at 1700Mhz (CL9) with 1.65v :shakes: i will test them again tomorrow. Either the board or the kit doesn't scale further :shrug: I will test some more or i'll give them a negative for that :rofl:
Quote:
Originally Posted by stasio
i dont know how he managed those results, mine dont scale over 1600 :shrug:
nice
In core i5, uncore = 2x dram is not needed? Give it a look at the guy that made 1800 mhz, it has 2800 uncore O.O
Seems a nice kit, good timmings =D
1600 CL6 with 1.46v is perfect!:up:Quote:
Originally Posted by LinkinParkBoy
Awesome! 6-6-6-18 @ 1.5v a possibility? :D
I couldn't boot them at 1600Mhz 6-6-6-18 with 1.65v but will test it now on x58 plataform ( asus p6tD deluxe )Quote:
Originally Posted by TheBlueChanell
Edited:
News: Yeah 1800Mhz 7-8-7-24 @ P6TD Deluxe, prints soon :P
Great ram !
Anyone has result with AMD platform ?
Good to hear :)Quote:
Originally Posted by LinkinParkBoy
Did you test with the new bios i send you for p55-gd80 ?
:eek::D
DDR3 1800Mhz 7-8-7-24 1.50v WPrime 1024M
http://img25.imageshack.us/img25/634...1800wprime.png
DDR3 1800Mhz 7-8-7-24 1.50v Sandra
http://img686.imageshack.us/img686/4...1800sandra.png
No boot, not even with 1.65vQuote:
Originally Posted by TheBlueChanell
When will you get your kit?:DQuote:
Originally Posted by TheBlueChanell
Stable DDR3 1800Mhz Cl7-8-7-24 1.50v :D
http://img3.imageshack.us/img3/5375/...800linpack.png
LinkinParkBoy
Try memtest 3.9 ;)
try 100 run of this: http://www.youwatched.com/datajay/linx-setup.exe
Are you talking about the Windows version? I don't have a camera right now to take any pics...Quote:
Originally Posted by WaterFlex
Also, the Windows version doesn't test the whole memory.
LinkinParkBoy
Man you can run two or even 3 at the same time :)
omg, thats a nice memory :DQuote:
Originally Posted by LinkinParkBoy
Think I have found my new memory :D
Someone post max stable frequency results if possible,please?
Anyone run this on an AM3 system yet?
Since when did Linpack (otherwise known as IntelBurnTest and LinX) not do the job?Quote:
Originally Posted by WaterFlex
So has anyone figured out what IC these use? and there has been no sudden deaths with this Ram? i was looking at buying a triple chan kit and just using 2 sticks of it in my AM3 build as it is a lot easier to find good ram in triple chan kits for w.e reason
Dragon
I'd agree with HCI Memtest (as many instances as CPU threads) being the best overall for RAM stability/error checking.Quote:
Originally Posted by BeepBeep2
does anybody know if they can do 2000 mhz cl9 ?or cl8 @ 1.65v?
looks good. I would have considered it if it was a 6 gb kit
Come on, someone try these on an AMD platform! :D
No one has tried these on AMD yet? :sad face:
Dragon
Try 2000 mhz cas 8 or something like that and tell us what happened :D
They dosent run great on amd i cant get thm to do CL6 even at 1333mhz and from 1.35-1.70v no matter what it wont boot i am on a Msi GD70 and a 965BE C3
But they will do 7-7-7-18 1T at 1.42v 1600mhz
__________________
1800MHz?:rolleyes:Quote:
Originally Posted by Riska
I'm also trying to get them work with a 965BE C2 and a Gigabyte MA790FXT-UD5P (latest F8 beta bios) and I'm not having luck...Quote:
Originally Posted by Riska
- CL8 at 1600 works but the PC seems to freeze randomly
- CL7 at 1600 does not even boot
- CL6 at 1333 also no boot
Only 7-7-7 at 1333 seems to work decently until now...
lol, i just dont get how intels can run ram so much better with there new IMC when AMD has been at the IMC game for YEARS longer.....seems like most/if not all ram runs better on intel then AMD, i was thinking of getting this ram, i guess ill just get some ripjaws
Dragon
This kit is highly optimized for the LGA1156 platform.Quote:
Originally Posted by FireDragon
http://i2.photobucket.com/albums/y38/K404/DSCF0326.jpg
http://i2.photobucket.com/albums/y38/K404/DSCF0312.jpg
:up:Thanks for the info.
Riska, does this kit run at 1600 CL7-7-7- on GD70 stable? I thought only Micron chips and Elpida hyper can do it on AMD platform. :)
... like any other current GSkill kit. I haven't seen a single one that is approved/tested for AMD setups.Quote:
Originally Posted by Oliverda
What I find interesting is that in this "Memory Support List / QVL table" of the new Gigabyte MA790FXTA-UD5, this very same ECO CL7 (F3-12800CL7D-4GBECO) is one of the verified DDR3 1600MHz kits.
Has anyone tried max stable frequency at CL9?
yes it is stable i have used that setting for 2 days now and no probs what so ever
anybody got any AMD screeshots?
Here is a quick ss it is stock timing and 1.37vmem
lmoa what ram ISNT optimized for Intel now, It seems that every company has all but forgot about AMD hell it is even harder finding a highend air cooler or waterblock for AMD then it is Intel, And it not just that a lot of the ram performs badly on the AMD systems most of it just simply WONT work, when ppl on Intels r running them 2200+ mhz at tighter timmings then we run 1600 mhz.....i just find it funny is all, IDK how AMD stays in business at this point.....
Dragon
PS. look on newegg.com or any other site for that matter.....95% of the DDR3 ram listed says in one form or another made for Intel compatibility or for Intel chipset "XX", the ONLY thing u see for AMD is only one lonely kit with BEMP that isnt even supported......lmao
It's really stupid they don't have a 3x2 kit for this...
So they say they're optimized for 1156... does that mean I would have problems running them on a 1366 platform?
I'm gonna go with this kit. I really want 3x2 though, maybe I'll find someone that wants to split a kit with me. Check the FS section guys.
Not really :)Quote:
Originally Posted by LarsMarkelson
1900MHz 6-9-6-28 1,67volt
http://i317.photobucket.com/albums/m...MHzmemtest.jpg
AWESOME!!! Thank you thank you thank you for the reply noxon. W3520 HERE WE COMEEEEEEEEE
With this RAM, my super silent, super fast, uber video editing/rendering rig will be SUPER SEXY
Ah... I just noticed the low BCLK in your pic, noxon. So is it true this RAM can't get high BCLK with high memory speed?
Don't think that matters, i had no problem with 190 and 222bclk, but haven't tested that much yet!Quote:
Originally Posted by LarsMarkelson
Larsmarkleson, ther3 is like 4 other threads that r talking about this ram also, im sure u can find an answer in one of them lol
Dragon
Do you know which chips mounted:)?
so for extreme overclocker ripjaw or higher serie from géskill are better but for moderate overclock they are very good ?
I had the same issue for the CL7 @1600, so I dropped the ram ratio down to 3:10 (1333) and upped the fsb, and then the machine booted and was fine :shrug:Quote:
Originally Posted by MAXLD
some ECO TRIPLE CHANNEL test on Evga E762 :D
200 X 20 2000 6-9-6-28-88-5 1.65 ;)
http://forum.nexthardware.com/galler..._screen007.jpg
1 X 32m
http://forum.nexthardware.com/galler..._screen008.jpg
2 X 32m :yepp:
http://forum.nexthardware.com/galler..._screen010.jpg
2 X 32m + 3Dmark 06 :rofl:
http://forum.nexthardware.com/galler..._screen011.jpg
i'll continue here my tests
hiwa, can you run linx on 200 X 20 2000 6-9-6-28-88-5 1.65??
HiQuote:
Originally Posted by Ramguy
Eco dunno never tried but PIS series can do it easyt @ 1.62 Vdimm :D
http://www.xtremesystems.org/forums/...&postcount=146
Thanks Hiwa, Lynx on the X58 Chipset? or the P55?
p55 :DQuote:
Originally Posted by Ramguy
EVGA P55 658 bios A48
I5 750
Gskill 1600 cl7 eco 2x2gb
http://img205.imageshack.us/img205/7...02100cl616.jpg
2100 :)
Very nice :D
http://img704.imageshack.us/img704/5...2022237cl5.jpg
1600 5-7-6-21 :)
jareczek your kit is sick man
1600 cl5 is damn nice
Omfg!! epic sticks!!.
Anyone have tried on x58?.
Please can you post de exact model that you have please!! :D.
thanks!
We do not list any AMD platforms for the DDR3-1600 CL7 spec and others such as DDR3-2000 because not all AMD systems can run these. If we state that it is compatible with AM3 systems, many people with CPUs and mobos that are unable to handle the rated spec, expect it to run at spec, then when they can't get it to, it's "bad ram".
QVL from mobo manufacturers are memory kits that they have tested, so if their tests have shown to be compatible, they list it on their QVL. Our QVL is what we have specifically tested on.
Most LGA1156 memory should have no issues with LGA 1366, although it is not guaranteed since we do not test them specifically for those platforms.
Thank you
GSKILL TECH
Quote:
Originally Posted by MAXLD
some gulftown Triple channel test on E762
http://forum.nexthardware.com/galler..._screen006.jpg
http://forum.nexthardware.com/galler..._screen004.jpg
Thanks for the post G.Skill!
So do we have any benchers with an AMD testplatform using this? The only results I've seen so far are those from Chew* I thaught more would be interested:shrug:
Those are some impressive results with those sticks. I bought a set and have yet to play with them.
Sure, nothing wrong about that.Quote:
Originally Posted by GSKILL TECH
I currently have an Eco kit and I knew that was not officially AMD tested/approved (like any other GSkill kit), so no complains here. In the end, they don't seem an ideal fit for AM3 setups, but that's about it. They seem to perform very nicely with Intel i5 setups, and that's good, it's what they are for.:)
I only talked about the "MA790FXTA-UD5" case because it uses the same chipset than the "790FXT-UD5P", and yet Gigabyte says the ECO kit CL7 12800 is compatible at it's settings, which is kind of "weird". We only hope that the new board has a much better bios and better optimization...
In any case, was never implied that his would be a GSkill related issue. ;)
Guess what came from Mr. UPS and Mrs. FedEx yesterday?
Core i7 860, L938B279 SLBJJ thanks to Intel Retail Edge
G.Skill Eco DDR3-1600 CL7 1.35v thanks to Newegg
paired up with my:
Corsair HX620w, which I thought had died last week. Still not sure why the +12v rail went crazy, but it seems fine now...~2 years old.
Gigabyte P55A-UD4P, thanks to Micro Center
Cooler Master Hyper 212+ w/Scythe SFF21G, thanks to Micro Center
OCZ XTC Cooler rev.2 to keep the RAM cool, thanks again, Micro Center...
So far i've had it up to 8-9-8-24-1T at 2100, but 2100 is as far as it goes all around. Max bclk is 220, max cpu is 4.6 so far.
Thanks for the screens jareczek and Hiwa. You made my hand go to the order button. They're so damn cheap compared to Domi GT etc that I couldn't let these lay there in stock at the webshop:p:
Naturally I will also share my findings on P55 ftw as soon as I receive the dimms:)
Question:Quote:
Originally Posted by LinkinParkBoy
What's the difference between these two and why the one with tighter timings costs less! (apart from 777 timings on the second one):
http://www.newegg.com/Product/NewPro...-321-_-Product
http://www.newegg.com/Product/NewPro...-318-_-Product
The first kit is 1600mhz, second is 1333mhz.
Mos probably they have same chips.
Quote:
Originally Posted by
Question:
What's the difference between these two and why the one with tighter timings costs less! (apart from 777 timings on the second one):
[url
If you fail to post @ P55 FTW, try out other MCH Strap Settings that may help.Quote:
Originally Posted by darthcani
Why dont you stick with cas 6 or 7? With this kit trcd is what gets you mhz not cas. You should get over 1600 with 6-8-6 or 7-8-7 fairly easily.Quote:
Originally Posted by darthcani
I'm having similar problems with the kit, but I can actually post at most speeds and timings. It just bsod on me at random. However, I'm currently on the A39 bios and have yet flashed to a later bios.Quote:
Originally Posted by darthcani
Today I have time and might mess around with these sticks some more. So far I have been very unsuccessful.
Using P55 FTW here as well and everything is fine thus far in my testing. Flash BIOS A51, it gives you the lower memory voltages and works well. It also says in the changelist that it "improves memory compatibility".
Great scores, low vlots are here :up: