-
new BIOS m606c_12.b02 for abit AW9D MAX
-
very nice Coolaler...
What voltage settings on cpu, mch etc?
-
Quote:
Originally Posted by raju
very nice Coolaler...
What voltage settings on cpu, mch etc?
all limit,but i think it's could be lower
-
edit: ah yes I just had a proper look at your bios screen shot for the voltages, sorry missed that..
I will test the board with DDR2 Maximiser next week, less voltage required on Vdimm for higher clocks...
What ram timings did you manage at 445fsb 1:1???
regards
Raja
-
Quote:
Originally Posted by raju
I will test the board with DDR2 Maximiser next week, less voltage required on Vdimm for higher clocks...
What ram timings did you manage at 445fsb 1:1???
regards
Raja
4-4-3-4
it's runnig again,i will show when it's finish
http://www.iamxtreme.net/coolaler/ab...dbiosb02_8.JPG
-
hehe
it's 4-4-4-5 but show 4-4-4-27:mad: (maybe i am wrong option,i will try again)
http://www.iamxtreme.net/coolaler/ab...dbiosb02_9.JPG
-
NIce Coolaler !! I will try
-
Good job coolaler :toast:
Got my new board with proper EPS connector now, gonna try the beta BIOS later. Do you see any other improvements besides multi and TM options?
-
Quote:
Originally Posted by Sicness
Good job coolaler :toast:
Got my new board with proper EPS connector now, gonna try the beta BIOS later. Do you see any other improvements besides multi and TM options?
some cpu maybe no working at ratio option,try it,maybe u can:)
-
Quote:
Originally Posted by coolaler
some cpu maybe no working at ratio option,try it,maybe u can:)
Chaps over at hardwareluxx.de tested it with 6400 and 6600 retail, no problemo :)
-
air condition is off,i am wet:p:
TM working,when temp higher
http://www.iamxtreme.net/coolaler/ab...biosb02_10.JPG
-
28°C? Poor you ;)
Keep it coming mate!
-
-
Coolaler one last request bro' if you have time, can you show us Everest memory bandwidth please???
http://www.angrygames.com//files/everesthome220.exe
Let's see what it scores on that 1066 strap at 445fsb..
regards
Raja
-
Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.
-
Well, i think that those results with Spi 32MB a little bit dissapoint. I have here same/better results with my P5W DH with less FSB and less core speed.
http://img95.imageshack.us/img95/5063/66002rc6.th.gif
I'm missing something here?!
-
-
thanks Coolaler, great bandwidth on the ram..
-
max nb and fsb voltages and all you did was 433 x 9
please tell me that that not all you got ?
throw some water on it.
that high on air is silly. WAY too hot dont you agree ? 82c ? ouch
-
Cooler, can you run the "Cache & Memory Benchmark" located under tools. I get 10320 read when I run it the way you did, but using the one under the tools section I get 9146 read. My 9 X 400 scores beat all my 8 x 445's.
-
Still no 1:1, even with this beta. Hope Tony gets his hands on this board :(
-
Again...
Quote:
Originally Posted by JohnMike
Any comments?!
-
Quote:
Originally Posted by JohnMike
Again...
Any comments?!
I have this board coming Monday or so. I don't want to be discouraging & want to continue to see others hard work, but I tend to agree with you. I don't think this board will be replacing my P5W DH.
-
hey coolaler.. what happen to your video card? burned it again? :D hehehe your very xtreme.. ;) ..its good Abit is supporting thier board.. :D
-
Quote:
Originally Posted by situman
Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.
No, those arent OCZ sticks being used (they might be under those heatspreaders though). Coolaler has those custom heatspreaders with his own logo on them.
-
Quote:
Originally Posted by situman
Is that OCZ ram being used? I recognize those platinum heatspreaders. OCZ compatibility issue might have been resolved, if there ever was one.
It was not just OCZ that had compatibility issues. So far the beta has cleared up some D9 issues across several modules.
Edit- Several modules that would not boot before are now at 4:5 ratio, 1:1 boot is still out of question for the majority tested so far. More later...
-
Quote:
Originally Posted by party animal
No, those arent OCZ sticks being used (they might be under those heatspreaders though). Coolaler has those custom heatspreaders with his own logo on them.
yes!u've got:toast:
-
Quote:
Originally Posted by erwinz
hey coolaler.. what happen to your video card? burned it again? :D hehehe your very xtreme.. ;) ..its good Abit is supporting thier board.. :D
hehe!we test mobo stability only ;)
-
Quote:
Originally Posted by Sicness
Still no 1:1, even with this beta. Hope Tony gets his hands on this board :(
i am sorry that,
ur ram moudle not belongs this mobo.
-
Quote:
Originally Posted by coolaler
yes!u've got:toast:
haha, i remember cuz i thought they were awesome looking. And it was the first time that i've seen custom made heatspreaders. :)
-
Quote:
Originally Posted by JohnMike
Perhaps memory timings, OS, Optimization/tweaking :)
-
Quote:
Originally Posted by coolaler
i am sorry that,
ur ram moudle not belongs this mobo.
You're prolly right :(
But new RAM is so expensive these days, almost impossible to get good DDR2-800 2GB kits for less than €260 / NT$ 11 000 ...
-
Some of the Team Group stuff uses the same D9 found in Corsairs high end kits. I think I paid around $240 to have them shipped to the UK by Onepagebook. OC's pretty well for the price too.
-
Quote:
Originally Posted by Lestat
max nb and fsb voltages and all you did was 433 x 9
please tell me that that not all you got ?
throw some water on it.
that high on air is silly. WAY too hot dont you agree ? 82c ? ouch
cpu temp@abit EQ is 68c
it's looks well:D
http://www.iamxtreme.net/coolaler/ab...biosb02_12.JPG
-
Quote:
Originally Posted by coolaler
cpu temp@abit EQ is 68c
it's looks well:D
IMG]http://www.iamxtreme.net/coolaler/abitaw9d/aw9dbiosb02_12.JPG[/IMG]
Woot, take care of that chip mate ;)
raju: Sounds nice, but what if one or both of your sticks die? Who'll take care of warranty stuff?
-
Quote:
Originally Posted by Sicness
Woot, take care of that chip mate ;)
raju: Sounds nice, but what if one or both of your sticks die? Who'll take care of warranty stuff?
cpu never die in high temp:slap:
-
Quote:
Originally Posted by coolaler
cpu never die in high temp:slap:
Ye, but volts? :D
-
Quote:
Originally Posted by Sicness
Ye, but volts? :D
u right,but is hard to die
if dead,who care?it's have 3years warranty:p:
-
Quote:
Originally Posted by coolaler
u right,but is hard to die
if dead,who care?it's have 3years warranty:p:
Yeah, true ... ;)
-
Quote:
Originally Posted by coolaler
u right,but is hard to die
if dead,who care?it's have 3years warranty:p:
lol
3yr warranty not for overvolting and overclocking death
but still,
coolaler-san is that 433mh cold bootable 100% or does sometimes the board not boot, and it goes back to defualt and you must overclock again ?
can you power off motherboard, go for walk come back and it works ?
what about after memtest, or linux command line prime.(init 3 environment).. after the ram and cpu get nice and warm from that, if you power down or reboot and the motherboard boots everytime ?