Printable View
Lo0L! Nice Job Cupcake! I really like the look on the "Extreme" bended ramsinks! Why haven't you just cut them a little so there is enough clerence for the Tubing :p: I bet it was harder to bend them like that! Oh and Nice job on the Lapping! while it was into the loop ?! :D
My ram gets pretty hot casue it was vmodded so I left the whole thing there
and it looks cooler
another thing, I took out the back fans simply cause I dont need them, the fans on the rad suck the air out, my chipset never goes above 40c with the stock cooling .
Thanks for the comments guys, BTW Im gonna top mount a 2x120mm rad when I set up my machII :D
oh and no modding has been done to the case to get everything to fit although loads of zipties have been used to hold on the rad as you can see
Well, I haven't seen that at all really in the recent posts, but if you're talking about some of the older posts, yeah, I see that quite a bit.Quote:
Originally Posted by marauder16
http://www.nvnews.net/vbulletin/atta...1&d=1167542317
http://www.nvnews.net/vbulletin/atta...1&d=1167542317
http://www.nvnews.net/vbulletin/atta...1&d=1167637467
http://www.nvnews.net/vbulletin/atta...1&d=1167637174
http://www.nvnews.net/vbulletin/atta...1&d=1167637174
http://www.nvnews.net/vbulletin/atta...1&d=1167542317
http://www.nvnews.net/vbulletin/atta...1&d=1167542317
http://www.nvnews.net/vbulletin/atta...1&d=1167542911
http://www.nvnews.net/vbulletin/atta...1&d=1167542911
http://www.nvnews.net/vbulletin/atta...1&d=1167542911
Nice rig, but why not both videocard waterblock barbs pointing upwards?
That would help having shorter tubing quite a bit.
Love the Pentosin.
not the old but the new ones, ..., though now it's good, seems I had some problems with my DSL connection... :rolleyes:Quote:
Originally Posted by coyotetu
I originally had a northbridge block in my loop and was planning on going SLI, and with the 1/2" tubing there was just a lot of clutter there over the top of the graphics card, so I decided to route it around to the other side. I just never changed it. I didn't want to go through the hassle of undoing the clamps and leak testing that section all over again.Quote:
Originally Posted by Zeus
Do you think it's really hurting the temps that much? I'm using an Iwaki MD-20RZ and the water shoots through pretty fast.
Here are my temps. I consider you guys the pros in the business, so please let me know if there is anything I can do to drop them some more:
http://www.nvnews.net/vbulletin/atta...1&d=1167632575
Processor is at 1.5v; GPU hits 51C under load.
This is my first attempt.....Running Vista x64 RTM.
CPU temps
TJunction 85', Core #0 39', Core#1 39', Radeon is down from 85' with stock cooler to 41'@ idle, 50' with load.
I don't really think temperature is a point there, though it is a 180 degree bend, that pump should be doing it's job, I just think it's more about the look of it.Quote:
Originally Posted by Xion X2
^ Well, if that's the case then I think it looks fine. I like the 180 bend there.
Here's my set up
http://img401.imageshack.us/img401/185/dscn1879ye0.jpg
Slade I thought you got a better video card....?
Xion, that's awesome. The blue/black is really cool.
It's on the way..... waiting for a few more parts. Swapping from a BIX to a BIX-II and more fans. MP-05 SP LE is on the way out- for the new D-Tek FuZion!!
http://home.rochester.rr.com/computerdynamics/BIX-II
Thanks man. :cool:Quote:
Originally Posted by Silvermirage
Xion X2 ... High five 2X
sladesurfer changes out his watercooling loop again! This is the fourth time I remember him switching it out since 2006...
*high five*Quote:
Originally Posted by hopper
Nice appliqué on your window, did you make it or buy it?
The "H2O Cooled" appliqué that is :)
Thanks, I bought it.
You seem to be missing a 3-1/2" bay cover. I'm anal retentive and that really troubled me even though you have a really beautiful rig lol :) I like that case and I have a couple of the same (but not in silver alu). Is it me or is dust rapidly forming at the base of your radiator up top? There I go, being anal again :) Looks to me that your money gets siphoned off by performance pcs as well lol :D
Haha Ian I'm the same way. Everything has got to look perfect, and preferably symmetrical.
No, actually I'm the same way and extremely anal about it, too. The 3.5" cover is missing because I stripped the back screwhole on my hard drive, so if I try and slide the drive all the way into the bay and mount it on that back screw it won't tighten down. But if I slide it forward I can use the other screwhole that lines up. So it sticks out a little and gets in the way of the 3.5" cover that was on the case. I'm sure there's probably an easy fix for that; it was only meant to be temporary, but it bothers me too. I don't like the way it looks.
As for the dust on the radiator, when I checked it there was a little dust up there but most of that is actually the glow of the fans that are sitting on it. The silver lightnings glow a bright white and shine through the holes in the rad. I've since cleaned off the radiator, anyway. A lot of that stuff doesn't show up until you get it under a camera flash.