The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

11-06-2005, 12:58 AM
$SOLID$ Necro

1 Attachment(s)

Quote:

Originally Posted by NiSMo

wat stepping u got there solid??

Well just for you I took the Zally back off and grabbed a pic :toast:

http://www.xtremesystems.org/forums/...id=39555&stc=1

You'd think as many times as I've done this I would have grabbed a pic first.. :slapass:
11-06-2005, 01:04 AM
NiSMo

Quote:

Originally Posted by $SOLID$ Necro

Well just for you I took the Zally back off and grabbed a pic :toast:

http://www.xtremesystems.org/forums/...id=39553&stc=1

You'd think as many times as I've done this I would have grabbed a pic first.. :slapass:

the pic aint working cos i cant see it :P :stick: hehe
11-06-2005, 01:10 AM
$SOLID$ Necro

Quote:

Originally Posted by NiSMo

the pic aint working cos i cant see it :P :stick: hehe

Give a Brutha few minutes to edit... :p:

I noticed it too, and had to go back to the original pic and start over :shrug:

So is it any good?
11-06-2005, 02:55 AM
Zeus

50Mhz more for OCCT doesn't come easy.
At 1.4V it passed OCCT at 3050MHz, for 3100MHz it needed 1.52V.

http://img.photobucket.com/albums/v6...CT3100MHz1.jpg

Gonna try for 3150MHz now. :)
11-06-2005, 03:58 AM
ncsa

@Zeus a very nice OC there :) is that a CABNE chip?

Would a 146 CABYE 540 PAW be better over a 144 CABNE 0540, apart from CPU multi?
11-06-2005, 04:10 AM
Pt1t

Quote:

Originally Posted by Zeus

50Mhz more for OCCT doesn't come easy.
At 1.4V it passed OCCT at 3050MHz, for 3100MHz it needed 1.52V.

http://img.photobucket.com/albums/v6...CT3100MHz1.jpg

Gonna try for 3150MHz now. :)

http://users.skynet.be/pt1t/146/146_3103_1.54v_occt.PNG
http://users.skynet.be/pt1t/146/146_....54v_vcore.PNG
http://users.skynet.be/pt1t/146/146_3103_1.54v_temp.PNG
11-06-2005, 06:29 AM
TheMeatFrog

Are the newer optys coming in the old retail box where you can see the chip through a little window or in the box that monarch shows on their site?
11-06-2005, 06:54 AM
sponge bob

i pulled IHS off my opteron, but my idle and load temps are much higher? i checked 3 times , my WC plock is nicely on ... any help?
11-06-2005, 06:58 AM
T_M

check to see if the bottom of your block is resting against the high side of the plastic socket
11-06-2005, 07:08 AM
T_M

Quote:

Originally Posted by sumang007

Also are there any guys here with CABYE FPAW in the low batch numbers (0200 or thereabouts). I don't think a lot of these can hit 3Ghz as easily as the higher numbered FPAWs and FPMW/FPBW.

my #0289 on Water:

http://i4mark.teknetixx.com/Opteron_...M%2026_266.jpg
11-06-2005, 07:35 AM
sponge bob

Quote:

Originally Posted by T_M

check to see if the bottom of your block is resting against the high side of the plastic socket

rofl. u are genius, i was, i turned plock as it should be, but full load is still like 50*c on stock clocks... maybe i just need to but IHS On, ther is now just AS5 between cpu and IHS
11-06-2005, 07:35 AM
Zeus

Quote:

Originally Posted by Pt1t

http://users.skynet.be/pt1t/146/146_3103_1.54v_occt.PNG
http://users.skynet.be/pt1t/146/146_....54v_vcore.PNG
http://users.skynet.be/pt1t/146/146_3103_1.54v_temp.PNG

Nice chip mate! :up:

I tried 3150MHz at 1.6V but couldn't get it to finish OCCT, our CPU's are pretty much the same as far as overclocking goes, mine's a CABNE 0530 APMW with heatspreader still on, what's yours?

Also, temperatures are about the same, can you do 3150MHz OCCT?
11-06-2005, 07:37 AM
MadMikeSS

Quote:

Originally Posted by TheMeatFrog

Are the newer optys coming in the old retail box where you can see the chip through a little window or in the box that monarch shows on their site?

The old style box, not the plastic retail pack that they show on the site.
11-06-2005, 07:46 AM
Pt1t

Quote:

Originally Posted by Zeus

Nice chip mate! :up:

I tried 3150MHz at 1.6V but couldn't get it to finish OCCT, our CPU's are pretty much the same as far as overclocking goes, mine's a CABNE 0530 APMW with heatspreader still on, what's yours?

Also, temperatures are about the same, can you do 3150MHz OCCT?

My is cabye 0540 FMBW, his is still on also

http://valid.x86-secret.com/cache/48318.png

With 1.69v :toast:
11-06-2005, 09:02 AM
sponge bob

Finaly, i buted IHS back, added some AS5 and my load temp are 5-7*c lower than with stock paste under cpu and IHS :slobber: going to ceck max OC with usal water, soon i will try some iced water
11-06-2005, 09:09 AM
computersmsa

Quote:

Originally Posted by Zeus

Nice chip mate! :up:

I tried 3150MHz at 1.6V but couldn't get it to finish OCCT, our CPU's are pretty much the same as far as overclocking goes, mine's a CABNE 0530 APMW with heatspreader still on, what's yours?

Also, temperatures are about the same, can you do 3150MHz OCCT?

The brother of this chip can finish OCCT at 3.2 GHz :D
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.58V.png

Edit : (Cause PM), I have'nt this step for sale, sorry !
11-06-2005, 09:55 AM
el rolio

heya, randomly messing with ma memory which i had runnin at 207mhz on divider before... just tried to get it up a bit before i change mobo... see what loose timings, higher bandwith and freq VS tight timings at closer to 200 would do... as you can imagine, not much at all except give varied millisecond times in super pi and higher sandra bandwith

http://revo21.com/pc/2.9_166div_32m.jpg
11-06-2005, 10:39 AM
Richdog

Guys quick question...

Which of these is faster for games and benching...

3Ghz (10*300) running 1:1 with TCCD @ 2.5-4-4-7...

or...

3Ghz running a divider (140mhz or whatever) for a total of around 230mhz HTT @ 2-2-2-5...

Is it the divider with tight timings?
11-06-2005, 10:40 AM
Zeus

Quote:

Originally Posted by computersmsa

The brother of this chip can finish OCCT at 3.2 GHz :D
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.58V.png

Saw that a couple of pages back, very very impressive! :slobber:
What kind of watercooling is that?

What the maxTcase on that chip?
Mine 's 67C.

In case you're going to sell it's sister lemme know. :D
11-06-2005, 11:11 AM
dogsx2

Quote:

Originally Posted by Richdog

Guys quick question...

Which of these is faster for games and benching...

3Ghz (10*300) running 1:1 with TCCD @ 2.5-4-4-7...

or...

3Ghz running a divider (140mhz or whatever) for a total of around 230mhz HTT @ 2-2-2-5...

Is it the divider with tight timings?

Try them both out on spi and see. It's going to be close, can't run 2.5-4-3? That would be faster.

The divider doesn't matter, only timings.
11-06-2005, 11:21 AM
Richdog

I havent got any RAM capable of 300HTT 1:1... but my friend is getting 2x sets of Gskill FX sent over from the USA and if he decided he doesn't want a pair he will sell themk to me.

At the moment I have OCZ PC3200, the new BH-5 stuff, so I want to know if it's worth selling them and getting the TCCD... or if it will make no difference in performance in which case i'll pass. :)
11-06-2005, 11:31 AM
sponge bob

http://sponge.ez.pri.ee/data/media/3/27.266.JPG I know , it sucks... cabye 0536 IHS on...
11-06-2005, 11:50 AM
philyau

now heres mine: Opteron 146 CABYE 0540FPMW 2.9Ghz stable (290x10). ram @ 9/10, 2.5,3,3,6 1t.

Finally after long long weekend prime95, superPi, memtest stable and decent temps as well.

phil

http://homepage.ntlworld.com/philyau/benches3.jpg
11-06-2005, 12:49 PM
gundamit

My CABNE 0530APMW finally gets its chance to go under the Prommie after my 144 came up short because the DFI mobo won't give me more than 374HTT. Its off to a good start doing what my CABYE 0528GPMW couldn't do. 3.5ghz only 1M stable now but good enough to do some 3-D which makes it my champ. I'm thinking I'll keep this one. ;)

Just some cheap UTT at crappy timings and not tweaked.

http://img328.imageshack.us/img328/4...x10sp1m6zj.png
11-06-2005, 01:04 PM
flesheatinvirus

Nice work there, thats a killer chip for sure. What do you think of the Koolance Exos?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 01:22 AM.

XtremeSystems