The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

11-05-2005, 06:56 AM
KeZzZu

Quote:

Originally Posted by Nano2k

Cabge are not so good clockers in general 2.7-2.8 max

hahahah my cabge hit 3g easily with air :)
11-05-2005, 07:19 AM
Richdog

He said in geenral... yours must have been a nice chip. :)

Anyway I have a 146 CABYE @ 3ghz now stable... loving it to bits. :slobber:

Super PI time seems a tad high though at 29 secs lol... but PI loves 1:1 doesn't it?
11-05-2005, 07:49 AM
sponge bob

3 ghz 1,6v 44*c full load

0536 cabye 144 opty
waterchill h2o
11-05-2005, 08:22 AM
Nano2k

Quote:

Originally Posted by KeZzZu

hahahah my cabge hit 3g easily with air :)

Thats why I said "in general" :toast:
11-05-2005, 09:34 AM
cool_dude

My results :) Will try higher later on :)

http://img120.imageshack.us/img120/1...oldude25ys.jpg
[Ignore the PSU Rails, they're false readings]
11-05-2005, 09:46 AM
TEDY

so CAB2E also not bad at all
11-05-2005, 09:50 AM
cool_dude

nope :) going to see if i can hit 2.9, maybe 3 :D

I am happy as 2.8 was my goal, so if it doesnt do any more i wont be that bothered but ovbiously it'd be great if i can squeeze another 100/200mhz out of it :)

Thx,
cool_dude
11-05-2005, 10:34 AM
DeToNaToR.cl

Im getting mi opty 146 or 144 in a couple of weeks... to chile only arrived the 150 thats extremly expensive...

If im lucky i wil get a good stepping hoping for a CABNE 0530 or better...

How do you think and opty will run under a Zalman 7000B AlCu?
11-05-2005, 10:44 AM
Sumanji

Quote:

Originally Posted by DeToNaToR.cl

How do you think and opty will run under a Zalman 7000B AlCu?

I'll let you know on Sunday :)

Suman
11-05-2005, 10:53 AM
WesM63

Quote:

Originally Posted by Richdog

He said in geenral... yours must have been a nice chip. :)

Anyway I have a 146 CABYE @ 3ghz now stable... loving it to bits. :slobber:

Super PI time seems a tad high though at 29 secs lol... but PI loves 1:1 doesn't it?

Low Latency and 1:1 helps Super PI alot. I pulled out a 29sec SPI with my CABYE @ 10x290 3-4-4-8.

My TT BT is on the way, hopefully that will get me to the magic 3ghz. If not as soon as the prommie gets fixed i know it will :D
11-05-2005, 11:14 AM
sponge bob

http://sponge.ez.pri.ee/data/media/3/27.469.JPG
11-05-2005, 11:20 AM
Eagleclaw

What type of load temps are you getting with your Hyper 6?

I have the Coolermaster KHC-L91-U1 but won't get my opty until next week or the week after.

thanks
11-05-2005, 11:24 AM
eva2000

Doing some burn in with Opteron 146 using high vcore as <1.6v vcore temps only max 45-46C on Cosair Hydrocool 200 water, not enough to burn in cpu apparently...

http://fileshosts.com/DFI/NF4_SLI_D/...ad_3040mhz.jpg

Graphs using MBMLog plugin http://i4memory.com/showthread.php?t=1635 :D
11-05-2005, 11:24 AM
dogsx2

Quote:

Originally Posted by Zeus

146 CABNE 0430 is unbeatable. :banana:
Here's 3050Mhz 1.4V watercooled ambient ~19C Heatspreader still in place.

http://img.photobucket.com/albums/v6...CT3050MHz1.jpg

Yea, any cpu that can do that is pretty good. :D Ambient 22c with Koolance2 with heatspreader on. ;)

http://img240.imageshack.us/img240/8352/30312qs.th.jpg

http://img240.imageshack.us/img240/6...occt8ap.th.jpg
11-05-2005, 11:34 AM
dogsx2

Does 30c idle @22 ambient at 1.4v sound about right with a Koolance2? Is there a trick to seating it right? Any advice would be helpful.
11-05-2005, 11:38 AM
eva2000

Quote:

Originally Posted by dogsx2

Yea, any cpu that can do that is pretty good. :D Ambient 22c with Koolance2 with heatspreader on. ;)

http://img240.imageshack.us/img240/8352/30312qs.th.jpg

http://img240.imageshack.us/img240/6...occt8ap.th.jpg

what's with the OCCT text font being different ???
11-05-2005, 11:45 AM
dogsx2

Quote:

Originally Posted by eva2000

what's with the OCCT text font being different ???

One says I was almost done, the other says I was done. Didn't cost anymore so I thought I'd show both. :D
11-05-2005, 11:48 AM
mongoled

Quote:

Originally Posted by eva2000

what's with the OCCT text font being different ???

I noticed tht also, is the system missing fonts?
11-05-2005, 11:48 AM
eva2000

no i mean font type

http://www.fileshosts.com/DFI/NF4_SL...inished_tn.jpg

Where do you change the font type ?
11-05-2005, 11:48 AM
racinjimy

Quote:

Originally Posted by ixtapalapaquetl

Back on track, I then tried a few other sticks of RAM with the same results. After lots of futile experimentation with timings, I finally tried lowering MAL/Read Peamble to 8/5.5 from 9/6. This immediately brought stability to the large FFT tests. Again, I was stupid - this should have been the first thing I tried knowing that Opterons are sensitive to these settings. Large FFT's are now a breeze, even at low voltage. Incidentally, my single core CABNE likes those values too, which got me thinking...

tighter timings brought stability?????
11-05-2005, 11:53 AM
Pt1t

Quote:

Originally Posted by eva2000

no i mean font type

http://www.fileshosts.com/DFI/NF4_SL...inished_tn.jpg

Where do you change the font type ?

http://users.skynet.be/pt1t/146/146_...55v_occt_b.jpg

that s right font :D
11-05-2005, 12:02 PM
corvus_corax

Do you check the new CPU-Z beta version about Vcore? it seems to be that now shows the real voltage. At least the voltage that you set in Bios.
11-05-2005, 12:09 PM
Pt1t

Quote:

Originally Posted by corvus_corax

Do you check the new CPU-Z beta version about Vcore? it seems to be that now shows the real voltage. At least the voltage that you set in Bios.

Do you have link ?
11-05-2005, 12:10 PM
corvus_corax

Quote:

Originally Posted by Pt1t

Do you have link ?

My bad.
Here:
http://forum.x86-secret.com/viewtopic.php?t=4221
11-05-2005, 12:12 PM
Pt1t

Quote:

Originally Posted by corvus_corax

My bad.
Here:
http://forum.x86-secret.com/viewtopic.php?t=4221

thanks

Show 100 post(s) from this thread on one page