please share:DQuote:
Originally Posted by cstkl1
Printable View
please share:DQuote:
Originally Posted by cstkl1
its on evy site
Dual EPS mod done, I used two of the blue PCIE cables and plugs, taking two 12v and GND from each. Initial tests show absolutely no difference at all. lol I'll try some 4.5GHz LinX later to see if it's stabilised things there at all.Quote:
Originally Posted by radaja
EDIT: It might just be me (and Linx testing later will confirm) but I think the CPU is running cooler now...
great to hear.i also heard that using two helps with the IMC which helps in better memory stability for extreme memory OCs?Quote:
Originally Posted by kup
but i might have misunderstood it.but its good to know i can mod it with my existing cables(that came with)my HX850:D
Well radaja.... did you get the board?
i'm 1000000% he didQuote:
Originally Posted by OC Nub
he's far too quiet lol
i'll be back on mine as soon
as i get my antec tpq 1200 back from rma:mad:
it died while a leaktest :rofl: no load
Damn that sucks man.Quote:
Originally Posted by zsamz_
He is kind of quiet isnt he, must have got it today.
:yepp:Quote:
Originally Posted by OC Nub
soon i will be noisy,but for now i have just turned it on:DQuote:
Originally Posted by zsamz_
you will be back in business in no time:d
plus you have some other toys to play with,right?
always quiet before the storm:up:Quote:
Originally Posted by OC Nub
Did you do the dual EPS mod for it?
not yet.
i cant seem to get the x21 to work?
in bios it only lets me set 12-20.
im running bios 6/30/10 rev13 but i tried
running 21x215 and it just wont do it?
radaja, if I enable turbo it still shows 21x multi on this 930 in bios but in windows it shows the 22x multi.
Managed to get 2300mhz mem but looks like it drops a channel unless I raise the timings.
http://img43.imageshack.us/img43/3624/23001.png
Uploaded with ImageShack.us
ok,i was looking at your bios SS's and thought i should be able to do 21 too:D
but i dont own a 930 do i?no i dont:ROTF: my first classy fart
:rofl:Quote:
Originally Posted by radaja
It is running at 21x in windows?
you know i never checked,i just kept rebooting into the bios to see if any of my
changes i tried had worked and then when i finally booted into windows it failed
so loaded defaults and then posted here on how to fix it:D
man these voltages are whacky,it loads my vtt at stock as 1.24v so +100 gives
1.36v but load it jumps to 1.39v.
you test with dmm? e leet reads very high but with a dmm vtt was much lower.
Just started linx, e-leet reads vtt at 1.37v and dmm reads 1.28v. have it set to +75mv in bios
Quote:
Originally Posted by radaja
:yepp: i fired up my ut p35 n slaped in the 4870x2 n testin
OMG! OcNub gonna hit 30k in everest copy
how much juice you pumpin in there lol
i havent tried a DMM yet but i will soon.what kind of temps are you getting on vreg and NB and MB sensors?Quote:
Originally Posted by OC Nub
i got the AC blowing in hard and still at 27c vreg/39c Nb/17c MB? i cant figure out how to get NB and vreg
temps down like the MB sensor.i have three 40mm fans blowing directly down ove socket and another on NB
nice:up: the P35-UT-T2R stomps my EP45-UD3P.but soon i will rectify this:DQuote:
Originally Posted by zsamz_
took 1.71v dram and 1.60vtt. stopped after that, dont want to kill anything.
vreg is 29c, this software doesnt show nb on this c3 yet, only place to check is in bios, which doesnt do a lot of good. with your cooling im sure everything is fine.
aida64 and everest read board as unknown still.
http://img534.imageshack.us/img534/2165/tempss.png
Uploaded with ImageShack.us
well im off to bed,but i did manage to get the hang
of this new MB and will play all day tomorrow with it.
http://i54.tinypic.com/23ra0sz.jpg
wow...great CPU!!!
use mch strap 1333 and u will get better timingsQuote:
Originally Posted by radaja
the new bios
hmm seems a lot of ppl dont know how to use it
with the tWL and tRL ( it was incomplete without the tWL)
and the tREF
u can use any other manufactorer ram timings
example like r3e bclk 200 C8 2:10 timings
http://i287.photobucket.com/albums/l...1/af11e3ee.png
r3e timings are much more mem timings tighter but
less strained for ure Uncore especially on C7 and C6 on 2:10
^^ Thanks, strap makes a big difference in sub timings and in aida64 bench, I was using 1600 to try and keep it stable. Trying 1066 strap, required 1.67vDimm.
http://img577.imageshack.us/img577/8905/1066strap.png
Uploaded with ImageShack.us
just raising uncore seems to give me the best boost even with 1600 strap.
http://img217.imageshack.us/img217/5992/21uncore.png
Uploaded with ImageShack.us
Wow Nub, 4.5GHz Uncore on a 930 on water....do I even want to know how much Vtt you are feeding that poor thing?
Iam testing the new bios 77 with my 980x on SS and works great
http://img146.imageshack.us/img146/2201/screen030q.jpg
http://img713.imageshack.us/img713/3637/screen029r.jpg
Nice one, 5-6-5-X at 798 MHz. Good to see CL5 working, could never even get that to boot on my R2E.