Incoming Teaser.
http://img.photobucket.com/albums/v2...a/IMG_0510.jpg
Printable View
Incoming Teaser.
http://img.photobucket.com/albums/v2...a/IMG_0510.jpg
wow you guys have some really really nice cases!
nice bro!
very, very nice!!
Regards!
Nice...thats a minnesota build for ya! :up:Quote:
Originally Posted by BlueAqua
@blue aqua
what gx2 block is that? and how did you fit it? that looks nice!
ek block in the original gx2 casing
Oh If you pay me, I will give you one :D
Quote:
Originally Posted by mrmaigo
I suppose that'd be cheaper than flying out there and supplying sex :rolleyes:Quote:
Originally Posted by Mjhieu
Change my Good Old Stacker STC-01 into inverted ATX setup
http://i228.photobucket.com/albums/e...n/DSC01719.jpg
http://i228.photobucket.com/albums/e...n/DSC01721.jpg
http://i228.photobucket.com/albums/e...n/DSC01720.jpg
The setup consists of dual mcr-220QP connect in paralell using y-fittings, D4 pump,D-Tek Fuzion CPU Block with Dual Core Nozzle, Aqua Xtreme MP-01 VGA Block
that look so SWEET pvtdonuts! :up:
http://i304.photobucket.com/albums/n...9/DSC_0259.jpg
http://i304.photobucket.com/albums/n...9/DSC_0260.jpg
http://i304.photobucket.com/albums/n...9/DSC_0261.jpg
http://i304.photobucket.com/albums/n...9/DSC_0262.jpg
http://i304.photobucket.com/albums/n...9/DSC_0264.jpg
http://i304.photobucket.com/albums/n...9/DSC_0265.jpg
http://i304.photobucket.com/albums/n...9/DSC_0267.jpg
http://i304.photobucket.com/albums/n...9/DSC_0269.jpg
without words...
BlueAqua that gx2 mod looks fantastic! cant wait to see your build log! :up:
Quote:
Originally Posted by google
Sorry to say but wow . . . .what a mess! Uber low-end components, unsleeved wiring. . . unorganized. . . inefficient water-cooling . . .on the bright side . . . .you have alot of opportunity to improve ;)
thanks! :) i knew i've seen his worklog before but can't seem to find it anymore :shrug:Quote:
Originally Posted by disruptfam
well i like his table (what wood is that?) & the view out his window :DQuote:
Originally Posted by DarthBeavis
I change my watercooling system in the computer 2. Heres pictures from that.
http://jannheik.daug.net/kuvat/surff...okonaisuus.jpg
http://jannheik.daug.net/kuvat/surff...konaisuus2.jpg
http://jannheik.daug.net/kuvat/surff...konaisuus3.jpg
http://jannheik.daug.net/kuvat/surff...08/nayttis.jpg
http://jannheik.daug.net/kuvat/surff...unnittelua.jpg
BlueAqua - Cant wait to see it finished, very very nice.
Alright here it is....I hope all enjoy. Some of the parts are Feser 240 Rad, XSPC Res Top on Laing 3.2 pump, D-TeK Fuzion V2, Tygon 3/8 tubing on 1/2 bitspower fittings.
http://img182.imageshack.us/img182/9287/dsc0100in6.jpg
http://img182.imageshack.us/img182/4232/dsc0098py6.jpg
http://img385.imageshack.us/img385/8061/dsc0102yh5.jpg
http://img180.imageshack.us/img180/4906/dsc0006acr8.jpg
http://img296.imageshack.us/img296/3...uter144oc8.jpg
http://img296.imageshack.us/img296/3...uter144oc8.jpg
http://img296.imageshack.us/img296/7...uter145yz7.jpg
http://img152.imageshack.us/img152/3...uter150wa6.jpg
http://img296.imageshack.us/img296/9...uter151ds0.jpg
I like it - clean, simple and elegant.
Using Flash
http://i98.photobucket.com/albums/l2...Nightmare3.jpg
Ambient Light
http://i98.photobucket.com/albums/l2...Nightmare1.jpg
Dark with ISO 100
http://i98.photobucket.com/albums/l2...Nightmare2.jpg
what raD?
M92 GTX Xtreme between CPU and the GPU's and a modded Reserator XT with 2 GT Stealth 240 X-Flows. Not the greatest but it works.Quote:
Originally Posted by disruptfam
thank you! It's been a little work, next is the NB, SB cooling then i'll work on the video cards.Quote:
Originally Posted by Tile
its a little to red but i like it nice job broQuote:
Originally Posted by Th3MadScientist
It not that red in person, the shutter stayed open for so long that it caught all the red light.
Woot.. finally got myself registered. Took almost a month to get everything sorted out. :embarrassed:
Anyways, thought I'd use my first post to show off my Rocketfish chassis. I have a worklog thread here.
I just ordered some more [better] memory from Newegg. I'm just tired of these high voltage Patriot sticks. :/
Hope you guys enjoy it. :)
http://img175.imageshack.us/img175/707/p1010407jz7.jpg
http://img294.imageshack.us/img294/8981/p1010415rw9.jpg http://img294.imageshack.us/img294/9620/p1010417ub6.jpg
http://img294.imageshack.us/img294/1614/p1010425ha7.jpg
http://img514.imageshack.us/img514/5462/p1010445qi7.jpg
Two more snappies
http://img372.imageshack.us/img372/3225/wooo091ls1.jpg
http://img397.imageshack.us/img397/4123/wooo092xn6.jpg
Seems like we all like the OCZ XTC :D
simpletech thats nice what case?
That's a Bestbuy Rocketfish that he custom painted. He has a few worklogs of it's progress and it's sick!
dang that rocket fish is real nice!
Beautiful antho! :D Both pictures and your rig. ;)
antho: So clean! So black! I so need a towel!
hey antho what are those things in your first pic?
Thx guys,
In the first pic it's the "heart" of the system, in the left it's an automatic rheobus, the mcubed t balancer big ng, at the right the device is call sensor hub, it's allows the connection of two flow meter, some temps sensor and is able to shutdown the system in case of failure. And the two things mounted vertically are called fan amp and control the pump speed.
This is the link to the manufacturer ;)
http://www.t-balancer.com/english/index.htm
wow thats pretty cool thats the frist time i see anything like that keep up the good work! btw i love the led's on your case how much did those 500 led's run you?
why the shoe??Quote:
Originally Posted by SimpleTECH
To show off that's he's a size 18 shoe, and how big (or small) that case is.
That is one impressive looking computer...Love it!Quote:
Originally Posted by antho
Well the case is HUGE so I guess his feet are HUGE too? lol. Size comparison?
Oh and heaps of people have the T-Balancer. It's a great product if you keep on forgetting to crank the fans when playing games/benching. :)
You know what they say about big feet.....Quote:
Originally Posted by MINIz guy
That they got big feet?:rofl:Quote:
Originally Posted by HaCKs
no! that they need big socks!!Quote:
Originally Posted by N3it1
That they have beautiful long and strong...........graphics cards?Quote:
Originally Posted by HaCKs
uhhh no....Quote:
Originally Posted by ownage
Haha :rofl: I love you guys :ROTF:
:hm:Quote:
Originally Posted by Pudi
you love guys?
http://guigo666.free.fr/comic/conner...20a%20homo.jpg
Haha :rofl::ROTF: Great pic. Nice builds too guys, keep up the good work everyone:cool:
nice setup antho! :up:
Thanks. Took quite a while to modify everything but luckily everything turned out alright. :)Quote:
Originally Posted by MINIz guy
Only if it comes in black. J/K.Quote:
Originally Posted by xTKxhom3r
Quote:
Originally Posted by HaCKs
Exactly. I also had a few members on another forum request me to compare my case to my gigantic feet. As you can see.. well.. err.. I'm abnormal. :rofl:Quote:
Originally Posted by MINIz guy
Quote:
Originally Posted by HaCKs
Quote:
Originally Posted by N3it1
Quote:
Originally Posted by ownage
But it takes quite a man to fill those socks. :ROTF:Quote:
Originally Posted by xTKxhom3r
Anyways. Thanks for the small support.
I just added my new Mushkin sticks and boy I'm loving them! 1.8V and I still get to keep my overclock. :up:
To xTKxhom3r , in fact the led's don't cost me that much around 80 $, me girlfriend bring them back directly to the Chinese manufacturer ;)
I've always wondered how this was done, i really like that style of wire sleeving nice man!Quote:
Originally Posted by lyl
@antho: where'd you get the T-balancer?
@lyl: just occurred to me...do you also put heatshrinks on the other end of the 1/8" sleeves (the ones closest to the bigger sleeve)?
To emoners http://www.aquatuning.de/ ;)
god that stuff's expensive!!!Quote:
Originally Posted by antho
antho thanks...found out that it's also available at Performance-PC
actually they're cheaper than the EK store, however parts from the US (well most of them) are very expensive (shipping?!)Quote:
Originally Posted by benniebeeker
Well, I dont individually shrink all 24 on both sides. I just used 1" shrink over the whole thing. Shrink is tight enough, im not worried about it unraveling.Quote:
Originally Posted by emoners
The first picture of course was incomplete (didnt have a black connector), but you can see the 1" shrink in the 2nd picture
that type of sleeving reminds me of the sentinels in the matrix haha and i think you would have to put tie straps to keep them all together wouldnt you?
http://images.imagup.com/03/1213996369_1.JPG
http://images.imagup.com/03/1213996415_1 (1).JPG
http://images.imagup.com/03/1213996476_1 (2).JPG
http://images.imagup.com/03/1213996511_1 (3).JPG
http://images.imagup.com/03/1213996532_1 (4).JPG
http://images.imagup.com/03/1213996555_1 (5).JPG
http://images.imagup.com/03/1213996580_1 (6).JPG
http://images.imagup.com/03/1213996600_1 (7).JPG
http://images.imagup.com/03/1213996616_1 (8).jpg
http://images.imagup.com/03/1213996631_1 (9).JPG
http://images.imagup.com/03/1213996649_zr (1).JPG
wow awesome build bro damn i love that case so much! how can you drop 300 for a case!!! i envy your deep pockets lol
Nice system!
You're water cooling an empty socket! Creative.
http://images.imagup.com/03/1213996616_1%20(8).jpg
that is mobo cooling ;)Quote:
Originally Posted by HaCKs
sweet pics
Changed out the barbs for some of the Koolance compression ones and added in some San Aces. A few pictures...
http://dl.getdropbox.com/u/2028/Xtre...s/_MG_3203.jpg
http://dl.getdropbox.com/u/2028/Xtre...s/_MG_3282.jpg
http://dl.getdropbox.com/u/2028/Xtre...s/_MG_3226.jpg
http://dl.getdropbox.com/u/2028/Xtre...s/_MG_3283.jpg
Lol I can't see the cpu so it's probably empty. Nice pics and thanks for sharing.
it's probably a pic while he's leaktesting, especially as there are no l;ight lit up on the mobo at all ;)
Antec P180!
http://img.techpowerup.org/080620/case.jpg
http://img.techpowerup.org/080620/hddbay.jpg
Custom button to turn off CCFL.
http://img.techpowerup.org/080620/ccfl.jpg
http://img.techpowerup.org/080620/case2.jpg
Only thing left to do is better cable management.
Most people say the P180 isn't an easy case for watercooling, but this case is easy to casemod and to make it ready for watercooling. You just need to be a little creative.
WTF is that green thing? I donut knowz but I likes it plenty . . .Quote:
Originally Posted by WarFront2142
Acrylic :). It certainly makes the back of the card more interesting.
would I be right in thinking you can't get the side panel back on?Quote:
Originally Posted by ownage
Yes, but then i would have to make an extra hole in the case. I won't use the side panel, so this way was good enough for me.Quote:
Originally Posted by matt100
I have a petter picture. Daylight and pc turned off.
The water is blue because i used Antifreeze.
http://img.techpowerup.org/080621/case3.jpg
LOL:ROTF:Quote:
Originally Posted by DarthBeavis
It is AcrylPanel 5mm - 480x480mm UVGreen :up:
http://www.it-service.be/webshop/pro...products_id=97
I meant what is its purpose . . . I could tell it was UV green acrylic sheet . . .but what is it doing there. It looks kinda neat. Is it used as a backing plate for something or a divider wall or a mounting or what?Quote:
Originally Posted by WarFront2142
I'd say it looks like it's there for more of a "bling" effect, not so much as a real purpose.
which would look pink . . .Quote:
Originally Posted by RealRedRaider
which makes me think of . . .
http://www.youtube.com/watch?v=fbh9UTOKfB0
Hey guys can i ask you a favor :D
I've lost my favourites and there was a site with the most beautiful watercooling made.
the tj07 murderbox and a blue cosmos s case where also on that site.
Can anyone tell me what the url is?
tks
Keeps dust offQuote:
Originally Posted by Gir92
http://www.million-dollar-pc.comQuote:
Originally Posted by Astratuner
I found some photos of my first WC'd PC, about 2 years ago or so now:
http://i86.photobucket.com/albums/k1...w/P1080074.jpg
Quote:
Originally Posted by b@llz0r
tks mate
bitteschönQuote:
Originally Posted by Astratuner
black or red
http://i192.photobucket.com/albums/z...p/IMG_1490.jpg
http://i192.photobucket.com/albums/z...p/IMG_1525.jpg
color combo
http://i192.photobucket.com/albums/z...p/IMG_1511.jpg
in full red
http://i192.photobucket.com/albums/z...p/IMG_1523.jpg
Fesser Black and Caterpillar ELC(red coolant)
RIG-under construction-
Both..
Quote:
Originally Posted by Baron
Yes, that's fully wired. I put a lot of effort into cable management.Quote:
Originally Posted by Simbyotic
As promised, here are some more pictures. (I think my camera's lens is a little dirty).
http://i38.photobucket.com/albums/e1...a/ee46a6df.jpg
http://i38.photobucket.com/albums/e1...a/d5cca4c5.jpg
http://i38.photobucket.com/albums/e1...a/2ae861e1.jpg
http://i38.photobucket.com/albums/e1...a/071cfb60.jpg
http://i38.photobucket.com/albums/e1...a/d6bff2ea.jpg
http://i38.photobucket.com/albums/e1...a/07e0a94e.jpg
http://i38.photobucket.com/albums/e1...a/05b5c35c.jpg
Ok seriously...where are all the wires?
I see the ends, but there has to be a mess behind the mobo tray...like kids cleaning their room and shoving everything in the closet or under the bed. :rofl:
Raxxath i'am speechless those f@cking wires are really a P.I.T.A
niiice what case is that?
I think that is MDPC worthy !
Looks like a Lian Li PC-A70 :cool:Quote:
Originally Posted by tbone8ty
EXTREME CLEAN. I LOVE IT! Congrats! How many time you spent on it?
Just a little teaser. Far from done yet :)
http://tilmpw.bay.livefilestore.com/...%20296.jpg
BTW: Nice rig, Raxxath!
Looks gorgeous, Intern. :) Looking forward to see the end result. ;)
Thank you everyone :). Being recognized for lots of hard work feels good!
It took quite a few months, due to lots of problems, but its great to have it finally finished. I'm still not sure if I should get a waterblock for the GX2, step-up to a GTX 280, or something else. I have all the parts for a second loop though, so maybe it will look even better in the future.
I would be honored to have my rig among those :eek:. The slightly-ghetto side panel needs to be replaced, though. I'm going to have another cut by a laser, so I won't need any channel molding.Quote:
Originally Posted by taylormsj