Rampage conversion

Printable View

Show 100 post(s) from this thread on one page

03-10-2008, 10:05 AM
zlojack

Quote:

Originally Posted by ZenEffect

im going to drop in a retail q9550 this friday :yepp:
hopefully 1004 bios + this cpu = very oc friendly. im hoping for 4ghz, but even 3.933 like i have now would be sufficient as its equivilent to about 4.1 or so on a q6600.

congrats on all of you with the rampage bios. im still going to wait for further releases then pick the best bios option based on what everyone is doing here. KEEP UP THE GOOD WORK

Where'd you get the CPU?

Still not available in Canada...:(
03-10-2008, 10:24 AM
Grnfinger

New Everest now reports properly

http://i237.photobucket.com/albums/f...inger/rmp1.png
03-10-2008, 10:30 AM
kup

How is it performing?
03-10-2008, 10:33 AM
andyr(uk)

I have the files on the stick ready to go so any feedback would be appreciated
03-10-2008, 10:41 AM
kup

Quote:

Originally Posted by andyr(uk)

I have the files on the stick ready to go so any feedback would be appreciated

Likewise. I'm curious as to the dividers and whatnot...
03-10-2008, 10:44 AM
tc17

I haven't installed this motherboard inside my case yet, I was testing it outside first, and am glad I did.

I have the Asus Maximus Formula motherboard, and so far this board is acting very weird with my Transcend memory. (using an e8400 cpu)

I have four 1g sticks of the Transcend ddr2 800mhz memory (two sets of matched pairs). When I do a memtest on them, I found that one stick out of each pair gives me errors. The other stick out of each pair does not.

If I put the "bad" stick to test back in my previous AMD computer, it has no errors.

So does that mean the memory is still bad? It makes no sense. I've never had this odd problem before with a motherboard.

This is the memory I have:
http://www.newegg.com/Product/Produc...82E16820208283
03-10-2008, 10:48 AM
ericab

same

Quote:

Originally Posted by andyr(uk)

I have the files on the stick ready to go so any feedback would be appreciated

same here andy, im about to take the dive too.

btw, latest everest = everestultimate_build_1314

if you cant find it, ill hook you up.
03-10-2008, 11:00 AM
The Stilt

I managed to flash the board back to Maximus Formula by using a engineer version of AFUDOS.

In the engineer version it is possible to turn off the "security" that prevents flashing in case the current ROMID and new ROMID & version would mismatch.

It is also unneccessary to use loader.rom & khan.exe because the correct bios can be flashed straight in.

Unfortunately I cannot share this version of AFUDOS.

In case Asus would deny bios updates for modded boards by changing the ROMID for Rampage (since the shipments have not started?) I will come to rescue.
03-10-2008, 11:10 AM
kup

Is it not possible to supply this engineer version so people can restore their boards if they don't like the Rampage bios? Or even just hint to a location?
03-10-2008, 11:12 AM
Mic

Writting this on my "Rampage".. everything seems to work nicely so far, Ill do a little more testing hopefully this board can push the limit a little further.

Quite a brave move Stilt to flash your maximus in the first place without knowing what would happend, and thanks for informing us about this cool mod.
03-10-2008, 11:13 AM
The Stilt

Quote:

Originally Posted by Mic

Quite a brave move Stilt to flash your maximus in the first place without knowing what would happend, and thanks for informing us about this cool mod.

Nah, I got SPI programmer nearby.
03-10-2008, 11:17 AM
kup

Quote:

Originally Posted by ericab

same here andy, im about to take the dive too.

btw, latest everest = everestultimate_build_1314

if you cant find it, ill hook you up.

http://www.lavalys.com:8081/beta/eve...ori5j1htcv.zip

Here you go, for anyone who doesn't have it. MODS, this should still be within the rules as it doesn't supply a key or activation, just the trial version of the software in the latest incarnation.
03-10-2008, 11:19 AM
brewer265

Quote:

Originally Posted by tc17

I haven't installed this motherboard inside my case yet, I was testing it outside first, and am glad I did.

I have the Asus Maximus Formula motherboard, and so far this board is acting very weird with my Transcend memory. (using an e8400 cpu)

I have four 1g sticks of the Transcend ddr2 800mhz memory (two sets of matched pairs). When I do a memtest on them, I found that one stick out of each pair gives me errors. The other stick out of each pair does not.

If I put the "bad" stick to test back in my previous AMD computer, it has no errors.

So does that mean the memory is still bad? It makes no sense. I've never had this odd problem before with a motherboard.

This is the memory I have:
http://www.newegg.com/Product/Produc...82E16820208283

try memtest after you disable legacy usb in bios.
03-10-2008, 11:37 AM
ericab

bypassing the ROMID without the engineering version---

supposedly, the "/nr” and “/n" switches disable afudos from checking ROMID
03-10-2008, 11:40 AM
sobih25

http://img225.imageshack.us/img225/8...pagefj1.th.jpg
my one works fine too :D.
03-10-2008, 11:45 AM
tc17

Quote:

Originally Posted by brewer265

try memtest after you disable legacy usb in bios.

Thank you for the reply. I just tried that now, but it didn't help. I still got errors.

Weird how one stick out of the same set is fine, the other isn't. Yet both sticks work without errors in my AMD board.
03-10-2008, 11:48 AM
brewer265

Quote:

Originally Posted by tc17

Thank you for the reply. I just tried that now, but it didn't help. I still got errors.

Weird how one stick out of the same set is fine, the other isn't. Yet both sticks work without errors in my AMD board.

You might need to bump the northbridge voltage a bit to use 4 sticks of ram.
03-10-2008, 11:48 AM
kup

Quote:

Originally Posted by tc17

Thank you for the reply. I just tried that now, but it didn't help. I still got errors.

Weird how one stick out of the same set is fine, the other isn't. Yet both sticks work without errors in my AMD board.

This is a frequent problem with the Maximus Boards...
03-10-2008, 12:03 PM
Zucker2k

Stilt, you are the man! I personally believe you're doing what Asus should have done (wishful thinking), if only they were a company with any moral standard. makes you wonder how many more crippled boards there are just so Asus can market the next board as the greatest thing.... oh... Commando comes to mind.

PS: Did the mod... for a beta bios, there are no significant negatives. Bios 1003 on the Maximus allowed me to run at TRD 7 well past 500 fsb, this won't . Bios 907 didn't let me do same either. Here's to hoping for that killer bios from asus; and oh... to the Stilt for saving me a couple of hundred bucks! :toast:
03-10-2008, 12:14 PM
The Stilt

Quote:

Originally Posted by ericab

bypassing the ROMID without the engineering version---

supposedly, the "/nr” and “/n" switches disable afudos from checking ROMID

Only works with engineer version, obviously ;)
03-10-2008, 12:23 PM
ericab

Quote:

Originally Posted by The Stilt

Only works with engineer version, obviously ;)

thats not what i understand;

apparently its worked for other people on different forums.. :shrug:
03-10-2008, 12:38 PM
andyr(uk)

Will it bugger up my raid array do you recon
03-10-2008, 12:42 PM
Mic

Seems to run better with lower vcore than it did before the mod.
270 FSB, 1.36Vcore, PL7

http://www.suntech.dk/images/wprime.jpg

Andyr - Didn't affect my raid0 array on my C drive
03-10-2008, 12:55 PM
Viss

Thanks Stilt :up:

http://img.photobucket.com/albums/v6...RampageX38.jpg
http://valid.x86-secret.com/show_oc.php?id=327508
03-10-2008, 12:57 PM
Grnfinger

With a fresh OS install it's really flying now.
I can post 525x9 altho not stable but it will post unlike the Maximus.

Everything seems to be running smoothly.
Did anyone require more NB volts for stability after the mod?

Show 100 post(s) from this thread on one page