Today's Numbers: Get 'Em While They're Hot!

Quote:

---

Originally Posted by emuexport

Karl.... what can I say...... just take ownership of the shed! :up:

The 4 quads in my garage make it into an oven! lol

---

Yeah, I'm going to see if he can make me a little bit of room so I can set up some shelves for the rigs.

Quote:

---

Originally Posted by emuexport

Oh yeah and with regards to your temps I think it must be something to do with your mounting. Also I do remember that some CPUs have different tmp readings depending on they type and program etc so maybe check that too.

---

Tried re-mounting, and it did nothing. When I had been playing around with it earlier on air, things seemed to be running fine, so I'm really not sure. The Q6600 is back under water, and I think the PSU D_A donated to me has blown a fuse or something (it'll run a stock E7200, but it seems a Q6600 at 3.0 with 1.25v was too much :p:).

Quote:

---

Originally Posted by jcool

I could offer a phase change setup with around 280W heat capacity, -30C loaded at 25C ambient. At 33C ambient (most I ever measured) it still held my Q6600 at -22C :up:
Don't even get me started on the elec bill though :wasntme:

---

The problem isn't with the temps that the rigs are at, the problem is that the rigs are putting too much hot air into my bedroom, making it un-inhabitable :p:

Eller

Quote:

---

Originally Posted by karl_eller

The problem isn't with the temps that the rigs are at, the problem is that the rigs are putting too much hot air into my bedroom, making it un-inhabitable :p:

Eller

---

In that case, a phase unit will only make it worse. An additonal 300W heat dump is obviously not what you need :D

XtremeSystems 5,066,619
:up:

thats another close one guys but i'll take it, keep up the great work :up:

close one; we need to keep it over 5 mil. MM what happened to your pink tu-tu?

Quote:

---

Originally Posted by Plan.B

close one; we need to keep it over 5 mil. MM what happened to your pink tu-tu?

---

I sent it to the cleaners with my toe shoes and leotards..:rofl:

Quote:

---

Originally Posted by Movieman

I sent it to the cleaners with my toe shoes and leotards..:rofl:

---

:rofl:

Don't forget the cape!

You know...you should wash the cod piece now and again too.

Quote:

---

Originally Posted by skinnee

You know...you should wash the cod piece now and again too.

---

:rofl::ROTF::up:

Quote:

---

Originally Posted by skinnee

You know...you should wash the cod piece now and again too.

---

Cod-piece (+2 vs. easynews), now that's funny...

Quote:

---

Originally Posted by phelan1777

:rofl:

Don't forget the cape!

---

yup, cape was sent too.. Extra $8.00 for that sucker..

Quote:

---

Originally Posted by skinnee

You know...you should wash the cod piece now and again too.

---

Yes, but that gets washed by hand in the sink with the other delicate items..:rolleyes:

I was down for today's work with a power outage, but one computer is back. Two more quads down until NYE when I get back home.

XtremeSystems 5,275,925
:up:

I'll be back home late tonight to restart the two quads that didn't come back on when the power came back !
At least I hope I'll be able to restart them..... :O

Nefalem is just chewing through units right now. I *think* sixteen down, might be more already.

XtremeSystems 5,526,322
:up: Good day!

XtremeSystems 5,547,962

Quote:

---

Originally Posted by MotF Bane

XtremeSystems 5,547,962

---

:up: and good night all..
Happy New year to you!

Nice to see we're back to the middle 5's. :up:

Excellent day of crunching everyone!! :clap:

XtremeSystems 5,824,608

that's more like it :)

Nice work, team. Unfortunately I'm only running WCG for about 8 hours a day (over-night) due to the good ol' Aussie summer, so my production has just about halved. And the E7200 is down completely due to a blow PSU (The PSU ran the E7200 at stock, but blew when I asked it to do a Q6600 at 3.0 Ghz with stock vCore :p:).

Eller

Quote:

---

Originally Posted by karl_eller

And the E7200 is down completely due to a blow PSU (The PSU ran the E7200 at stock, but blew when I asked it to do a Q6600 at 3.0 Ghz with stock vCore :p:).

Eller

---

:(
:shakes:

Quote:

---

Originally Posted by D_A

:(
:shakes:

---

The CPU still works fine, although I haven't checked mobo and RAM yet, but I think the fuse blew before it took anything out. I'll have to wait until I get a half decent jobbie to be sure, though. Not your fault, I was the one who put the quad on a cheap 350 watt :p:

Eller

I run my OCed X2 on a 200W fortron FSP.. at max bios Vcore :ROTF:
In a HTPC desktop case, no less. I am really surprised it didn't blow up yet :D

Am I afraid to kill it? Well no, not really.. it's a crappy clocker anyways, 1,54V for 2,7Ghz, jeez :rolleyes: