TeamGroup 2x1gb pc4000 Cronus!

Printable View

Show 100 post(s) from this thread on one page

02-28-2006, 04:39 PM
ozzimark

Quote:

Originally Posted by nn_step

NO you can't because those are micron chips and there are absolutely ZERO Team micron chips on this page
http://www.tankguys.biz/memory-pc4000-c-46_86_93.html
there is Infineon and Samsung but NO Micron..

yeah, cause every time someone submits an order, their inventory system sees it's out of stock and hides it from viewing.
02-28-2006, 04:41 PM
nn_step

Quote:

Originally Posted by ozzimark

yeah, cause every time someone submits an order, their inventory system sees it's out of stock and hides it from viewing.

ok, how do I found out when I can see it so I can actually buy it?
02-28-2006, 04:48 PM
Repoman

Chances are they won't even have enough to fill all the orders as it is, I doubt you'll get a set from them
02-28-2006, 04:50 PM
EnJoY

Quote:

Originally Posted by ozzimark

it's helping a bit. tried all of em from 256 to 000, and 016 was indeed the best. not enough to push me to that 300mhz mark.. it's more of a "feels" more stable. sPI runs are lasting a few extra loops, that kinda thing...

Try Skew Mode = Decrease and Skew set at 0. Also, try mal= 9ns (8 may be fine for you), and preamble at 5.5ns. For tref, try 166mhz 1.95us, which is 4708 in bios I believe.
02-28-2006, 04:55 PM
Repoman

Quote:

Originally Posted by EnJoY

Try Skew Mode = Decrease and Skew set at 0. Also, try mal= 9ns (8 may be fine for you), and preamble at 5.5ns. For tref, try 166mhz 1.95us, which is 4708 in bios I believe.

Isn't setting it at 0 the same as having no skew at all? And for TREF IMO you need to try all of the bottom 8 in the BIOS (all 1.95us settings). 2560, 3072, or 3684 I think are your best bets
02-28-2006, 05:13 PM
ozzimark

Quote:

Originally Posted by EnJoY

Try Skew Mode = Decrease and Skew set at 0. Also, try mal= 9ns (8 may be fine for you), and preamble at 5.5ns. For tref, try 166mhz 1.95us, which is 4708 in bios I believe.

skew increase (slow) is actually a smidge more stable, but inconsistantly. decrease is worse. i've tested that out quite throroughly

mal 9ns, i was trying not to do that, but i might if i can't get 300mhz otherwise
preamble already is 5.5ns ;)

also, tref.. i've messed around with that a lot too, and 3072 is definitly most stable no matter what.
02-28-2006, 05:20 PM
nugzo

Quote:

Originally Posted by ozzimark

all right, good luck ;)

also, i figure 6 hours of prime95 blend is enough. haven't had any suggestions as to what i should do for 3d testing, but i think if i can do 6 hours of blend, it'll take any game i can throw at it :D

Not True. The Mushkin Redline 2GB Kit can do 48+hours of p95 blend but instantly error in 3dmark05 and run like poop in BF2 and CS Source. With your Vid Card i dont think u can run the tests that we all want u to run :( Got any friends close by that'll let u borrow theirs and run a few benchies?
02-28-2006, 05:26 PM
[cTx]Philosophy

Quote:

Originally Posted by Repoman

^You can, tankguys has them, just unsure of how many they'll be able to get

Team isn't making them for long..

This is an email I got from TG today
February 28th, 2006 Newsletter

Product Announcements:

We are proud to announce we are now carrying Team brand high performance DDR memory! We are currently having 3 modules tested, and we'll have results posted on our forum. You can see the new memory offerings byclicking here. We expect great things from this company.

We are slowly expanding our offerings of stepping information on processors. We currently offer stepping information on the AMDAthlon X2 3800,Opteron 165, Opteron 146. We'll be adding more processors as demand allows.

Product Special Announcements:

AMD Opteron 146 - Normal price $214.99, on sale for only $194.99! (Quantities very limited!)

ASUS A8N32 SLI Deluxe - Normal price $210.00, on sale for $200.00

AMD Athlon 64 X2 3800+ - Normal price $316.00, on sale for $306.00

Other News:

As mentioned in our last newsletter, we have opened up our own forum. Traffic is steadily increasing, and we hope to continue to grow! Come on by and check it out, and join us! We offer exclusive specials for forum members, so it's well worth looking into.

Thanks to all of you who have supported us so far, we greatly appreciate your business. Have a great day!

-TankGuys Team

Also as a side note I cant get blend stable to save my bawlz, but I can 3d till the cows come home.. wierd huh?
02-28-2006, 05:41 PM
Onepagebook

I apprecaite all those who expect to purchase TeamGroup 2gb set cronus, here is the lastest update news from what the 1st director of Marketing, "I am pretty much confident that we will have nearly 400 pairs allocate to different regions especially focus on US market."

What about that guys? I promise that certainly you guys will have that just the matter you gotta give them to produce and do the QA.

OPB
02-28-2006, 05:52 PM
ozzimark

Quote:

Originally Posted by Philosophy

Also as a side note I cant get blend stable to save my bawlz, but I can 3d till the cows come home.. wierd huh?

quite interesting, and slightly amusing if i may say so :D
i have a strong feeling that i'm 3d stable at these speeds, but we'll see i guess.

Quote:

Originally Posted by Onepagebook

What about that guys? I promise that certainly you guys will have that just the matter you gotta give them to produce and do the QA.

OPB

indeed, time is of essence. Team is just now barely making their way into the US market, and people are already complaining about the scarcity of products :nono:
02-28-2006, 06:24 PM
EnJoY

Micron chips never had 3D problems. If they were prime, 90% of the time they were also 3D.

As for that TankGuys newsletter, they are having three sets of Teamgroup memory tested. A set of pc4800 TCCD, a set of pc3200 UTT, and a set of 2GB micron -5b F. I'm personally testing the 4800 and the UTT. Tankguys forum member Avalon got the Micron.

I'll be posting my results here as well as on Tankguys forums, don't know about Avalon though.
02-28-2006, 06:46 PM
ozzimark

Quote:

Originally Posted by EnJoY

Micron chips never had 3D problems. If they were prime, 90% of the time they were also 3D.

just played through a skirmish in warhammer, no problems at all. took about 30 min. this is at the same exact settings used in the prime95 stable shot i took earlier.
02-28-2006, 06:53 PM
klrgreenis

Nice :-D
02-28-2006, 07:00 PM
[cTx]Philosophy

nice keep us posted..
I have my expert and opty now all i need is my OCZ and my Cronus..
02-28-2006, 07:10 PM
nn_step

Quote:

Originally Posted by ozzimark

indeed, time is of essence. Team is just now barely making their way into the US market, and people are already complaining about the scarcity of products :nono:

What is wrong with wanting more product availablity?
it keeps prices reasonable and it keeps customers happy..
02-28-2006, 07:35 PM
ozzimark

Quote:

Originally Posted by nn_step

What is wrong with wanting more product availablity?
it keeps prices reasonable and it keeps customers happy..

but it hasn't even come in stock to begin with :p:

anyway, after doing some poking about, i'm gonna agree with enjoy.. micron doesn't have 3d problems, except in a few rare cases. this isn't one of those :toast:
02-28-2006, 07:45 PM
nn_step

ok, when can we expect to get some of these if humanly possible?
02-28-2006, 07:59 PM
ozzimark

Quote:

Originally Posted by nn_step

ok, when can we expect to get some of these if humanly possible?

not soon enough it seems :toast:

i'd say that in the next week or two we'll definitly start to see scattered stock showing up.
03-01-2006, 12:29 AM
Onepagebook

Quote:

Originally Posted by nn_step

What is wrong with wanting more product availablity?
it keeps prices reasonable and it keeps customers happy..

Oh ya.. why not.
According to Overclocker's manual:D

If Good product barely can be purchased, then it's not a good product but just an eye candy;)
03-01-2006, 07:15 AM
jack_tung

OPB
Excellent results !!
jack
03-01-2006, 08:42 AM
TankGuys

Quote:

Originally Posted by nn_step

ok, when can we expect to get some of these if humanly possible?

Team is sending more as quickly as possible. There's only a limited number of sticks available in the US at the moment, but more is on the way.
03-01-2006, 01:01 PM
rick_fx

Quote:

Originally Posted by TankGuys

Team is sending more as quickly as possible. There's only a limited number of sticks available in the US at the moment, but more is on the way.

I hope I ordered mine early enough to get them from this shipment :)
03-01-2006, 01:19 PM
ozzimark

1 Attachment(s)

here is about the best i can do. ICL 016 didn't end up helping, sadly. threw it back to 256 because it was much more consistant, despite previous experiences with 016 the other day.

http://valid.x86-secret.com/show_oc?id=75579

edit: enjoy, mind updating that DB of yours? :D
http://www.xtremesystems.org/forums/...=67762&page=57
03-01-2006, 02:19 PM
EnJoY

Anything for you ozzi, consider it done later tonight... ;)
03-01-2006, 02:34 PM
ozzimark

Quote:

Originally Posted by EnJoY

Anything for you ozzi, consider it done later tonight... ;)

thanks :toast:
i understand how you feel about updating it though... i'm kinda behind on the revE oc db over at [H]... :(

Show 100 post(s) from this thread on one page