Radeon X1800 XT (GPU: 1 GHz / Memory: 1 GHz)

Printable View

Show 100 post(s) from this thread on one page

10-25-2005, 03:18 PM
[XC]Atomicpineapple

I think theyre to do with different TV in/out formats tho im not sure, ppl feel free to correct me if im wrong.
10-25-2005, 04:04 PM
Nunyabiz

using the overclock tool i am at 648 core and 621 mem and I get 8670 in 05 :D I am trying to get them mem higher, I tried 650 and got artifacts, I just downloaded the newer version of the tool and I will try again.
10-25-2005, 04:55 PM
RickCain

Quote:

Originally Posted by Nunyabiz

using the overclock tool i am at 648 core and 621 mem and I get 8670 in 05 :D I am trying to get them mem higher, I tried 650 and got artifacts, I just downloaded the newer version of the tool and I will try again.

What processor are you running now?
10-25-2005, 05:06 PM
gunit

Quote:

Originally Posted by Nunyabiz

using the overclock tool i am at 648 core and 621 mem and I get 8670 in 05 :D I am trying to get them mem higher, I tried 650 and got artifacts, I just downloaded the newer version of the tool and I will try again.

what kinda cooling, stock?

its nice to see someone else put out something besides having to wait for ATI Tool.
10-25-2005, 06:00 PM
Nunyabiz

Quote:

Originally Posted by gunit

what kinda cooling, stock?

its nice to see someone else put out something besides having to wait for ATI Tool.

Yes stock cooling. I am at 654core and 621 mem and get 8743 in 05. Temps hit 75c so I think I will stop there until I get better cooling. Mem doesnt seem to want to go higher, but I think its heat related and might be better when I remove the stock hs.
10-25-2005, 06:32 PM
gunit

Quote:

Originally Posted by Nunyabiz

Yes stock cooling. I am at 654core and 621 mem and get 8743 in 05. Temps hit 75c so I think I will stop there until I get better cooling. Mem doesnt seem to want to go higher, but I think its heat related and might be better when I remove the stock hs.

Thats sweet! Brand? Im just hoping my sapphire will do 600/600 stock.
10-25-2005, 08:07 PM
Shadowmage

Get the fan to run 100% always, that will definately help :)

I haven't seen a single X1800XL that did lower than 625/650 or so, so 600/600 is easy pickings.
10-25-2005, 08:31 PM
gunit

Quote:

Originally Posted by Shadowmage

Get the fan to run 100% always, that will definately help :)

I haven't seen a single X1800XL that did lower than 625/650 or so, so 600/600 is easy pickings.

u sure hope so cause i sold my 7800 GT which did 500 core 1220 mem (fast as GTX) to get the x1800 xl. At 600 core it will perform like the GTX and beat it in some cases. I just dont wanna lose performance. Ill know in like 18 hours when fedex guy comes.
10-26-2005, 05:12 AM
cantankerous

Any of you guys try changing the thermal paste on the stock heatsinks for maybe a few degrees lower temps? I plan on putting ceramique on the core and ram to net a few degrees difference I hope over the stock gunk/pads. I would love to get over 600/600. I have an X800XL right now which is ok but playing on my dads X850XTPE is real sweet. Would be nice to have an X1800 run a little faster than that in my system.

BTW, new OMEGAs based on 5.10a are out with full support for X1800 card plus tweaks to the card that are found in external tools/betas. No voltage selection though but AAA/HQAF as well as memormap tool are included I believe if anyone wants to play.
10-26-2005, 05:24 AM
Sampsa

Hehe a little PR from ATI:

http://apps.ati.com/ir/PressReleaseT...leaseID=772964
10-26-2005, 05:28 AM
cooter

Quote:

Originally Posted by Sampsa

Hehe a little PR from ATI:

http://apps.ati.com/ir/PressReleaseT...leaseID=772964

Were you able to run any benchmarks at that speed or was that a Windows stable shot???? Anyway that is still hella fast with no artifacts.
10-26-2005, 05:38 AM
Sampsa

Quote:

Originally Posted by cooter

Were you able to run any benchmarks at that speed or was that a Windows stable shot???? Anyway that is still hella fast with no artifacts.

Just a Windows shot in 2D.
10-26-2005, 05:53 AM
nCrusader

Quote:

Originally Posted by Sampsa

Hehe a little PR from ATI:

http://apps.ati.com/ir/PressReleaseT...leaseID=772964

"...with maximum system stability and no visual artifacts." :rolleyes:

Now of a sudden, MHz matters? :p:
10-26-2005, 07:02 AM
perkam

Quote:

"Once faster GDDR-4 memory arrives next year, users can expect to see the hidden potential of ATI's innovative new memory controller"

Do let us know sampsa when THAT board arrives at your doorstep ;)

Perkam
10-26-2005, 07:09 AM
Diverge

Quote:

Originally Posted by cantankerous

Any of you guys try changing the thermal paste on the stock heatsinks for maybe a few degrees lower temps? I plan on putting ceramique on the core and ram to net a few degrees difference I hope over the stock gunk/pads. I would love to get over 600/600. I have an X800XL right now which is ok but playing on my dads X850XTPE is real sweet. Would be nice to have an X1800 run a little faster than that in my system.

BTW, new OMEGAs based on 5.10a are out with full support for X1800 card plus tweaks to the card that are found in external tools/betas. No voltage selection though but AAA/HQAF as well as memormap tool are included I believe if anyone wants to play.

I just got my card yesterday, brought my card to work, and swapped it into my lab pc. Installed the latest omega drivers, and using the overclocking tool I reached 600/600 with stock cooler, no artifacting while running rthdribl maximized on a 1600 x 1200 desktop to stess my card. The highest temp i've seen so far is 69° w/ fan at max speed. (with the card at stock settings, the temps reach this high as well w/ auot_fan_speed control on the card).

Edit: disregard my results for now - my lab PC is not setup for OCing ;p
10-26-2005, 07:10 AM
Dynasty

Quote:

Originally Posted by Sampsa

Hehe a little PR from ATI:

http://apps.ati.com/ir/PressReleaseT...leaseID=772964

very nice.
10-26-2005, 07:38 AM
Supertim0r

Xtreme Legend :toast:
http://www.3dchips-fr.com/actualites...clockeurs.html
10-26-2005, 07:48 AM
cadaveca

Nice going Sampsa! Saw the press release on businesswire....

http://home.businesswire.com/portal/...17&newsLang=en

:woot:

NOw only if you got some 3d at those speeds!

:toast:
10-26-2005, 10:04 AM
gunit

Quote:

Originally Posted by Diverge

I just got my card yesterday, brought my card to work, and swapped it into my lab pc. Installed the latest omega drivers, and using the overclocking tool I reached 600/600 with stock cooler, no artifacting while running rthdribl maximized on a 1600 x 1200 desktop to stess my card. The highest temp i've seen so far is 69° w/ fan at max speed. (with the card at stock settings, the temps reach this high as well w/ auot_fan_speed control on the card).

hey , try upping the core voltage a bit, it should go higher than 600. same for mem.
10-26-2005, 10:41 AM
Diverge

Quote:

Originally Posted by gunit

hey , try upping the core voltage a bit, it should go higher than 600. same for mem.

Yeah, i gotta play around with it more, but i actually have some work to do at work today lol. so i can't atm. The first time i ran 600/600 i bumped the vcore up one notch w/ the overclock tool, and a few mins of running rthdribl my screen went black and paused (like it was changing resolutions), then came back to what seemed like normal. I didn't notice at first, but during that time the overclock tool crashed, so at that point it was back to stock speeds... so basically my temps were not at that actual speed. I'll have to play more when i get home later :)

PS, sorry for the thread hyjack ;p

Edit: i was using everest ultimate edition to read temps, and was looking at wrong icon in the systray - those were my pcu temps lol... damn intel P4 500 3.4Ghz cpus run hot! that explains the crashes i guess
10-26-2005, 12:26 PM
cantankerous

well your not the first to talk about the black screen when overclocking this card. Someone else mentioned this happening last week when he overclocked his XL. I suppose it may be VPU recover kicking in due to the stress and/or heat of the card under that speed .
10-26-2005, 01:47 PM
[XC]Atomicpineapple

Yes I get the black screen for several seconds too when overclocking with the Driverheaven tool
10-26-2005, 02:03 PM
gunit

the screen going black is normal i think. I dont have any ATI software installed and I still get it.
10-26-2005, 05:00 PM
Bartflaster

Firstly well done Sampsa :toast:

I just recieved my XL today .. encouraged by the many who said theirs clocks well, and mine seems to run benchies at max CCC of 575/550 quite happily on stock cooler/volts.
But that cooler fan is a bit noisy for me, I noticed some Zalman clips holding Fugger's waterblock on, and wondered if he could tell me if they were from the 700 gpu cooler, and if so does it fit the XL card ?
Hopefully when the new ati tool is released I can join the ranks of XT clocks .. on a decent air cooling solution :banana:
10-26-2005, 05:06 PM
Nunyabiz

Quote:

Originally Posted by Bartflaster

Firstly well done Sampsa :toast:

I just recieved my XL today .. encouraged by the many who said theirs clocks well, and mine seems to run benchies at max CCC of 575/550 quite happily on stock cooler/volts.
But that cooler fan is a bit noisy for me, I noticed some Zalman clips holding Fugger's waterblock on, and wondered if he could tell me if they were from the 700 gpu cooler, and if so does it fit the XL card ?
Hopefully when the new ati tool is released I can join the ranks of XT clocks .. on a decent air cooling solution :banana:

The zalman vf700 fits the x1800's

Show 100 post(s) from this thread on one page