thanks for goin through all that trouble with the screenies Gautam
ur a star :toast:
shigs
Printable View
thanks for goin through all that trouble with the screenies Gautam
ur a star :toast:
shigs
Now macci... we need som LN2 dothan action with x800xt pe!!! giiiiive it to us :D
Sorry but I'm way too busy with some other stuff right now :DQuote:
Now macci... we need som LN2 dothan action with x800xt pe!!! giiiiive it to us
Dothan will get the treatment maybe at the end of the next week.
Just read this whole thing and I hope you bash those SLI, AMD, and NVIDIA SCORE! :)
amazing scores there macci .do you use a special biose when running a mobil cpu ? or is it just anything over 200 fsb ?will the adapter work on a asus p4c800 e deluxe ? or even better with my dfi 875-t board ? how can i make sure its a dothan core and not a sonama core ? the ones they hav in dk seem to be sonama . are they just as good oc ?
Try reading the dothan OC thread in the intel section.Quote:
Originally Posted by vanovich
Quote:
Originally Posted by vanovich
Currently the CT-479 adapter works only with s478 Asus boards.
I am not aware of any other board makers having moddified their BIOS to work with the adapter, nor have I heard of any enterprising individual having done so.
As mentioned above, there is one big thread and several other smaller ones dealing with the Dothan and the adapter and such. This one is macci's show.
Macci:
Does the P4P have the same problem with not locking PCI/AGP w/ ATI cards?
Do you measure vcore in any other way than thru bios/software?
I wonder what that could be :DQuote:
Originally Posted by macci
http://www.xtremesystems.org/forums/...ad.php?t=64242
I can't tell if you are being sarcastic or not Bennah.
Small update with a 'non-OC' 3DMark05 run:
Dothan at 2.4G (12x200)
X800XTPE at default clock (526/573 for my card)
http://www.akiba-pc.com/d16g/6607_s.PNG
Compare URL
Pretty good with basically 'default' clocks =)
The setup I used for the MArk05 single card record of 9591 scored (only) around 6150-6200 w/ X850 at default clock and FX at 3G or so.. ;)
Lookin good man :)
Let er' rip macci :toast:
Nice! I guess the competition is going to be heating up around here. :)
So you think x800 may be better for 05' than x850? Never tried..Quote:
Originally Posted by macci
I think he's saying the Dothan is better for '05 ;)Quote:
Originally Posted by k|ngp|n
clock to clock maybe yes but I guess x850 is better overall.
how much do you get w/ x850 default clocks and somewhat similar cpu speed?
anyways 6.6k ain't a bad score for a start =)
I remember that in Mark03 the setup that just (barely) hit 10k would do 7k with default video speed (CPU was at nearly max speed for 7k thou).
and thats also true :DQuote:
I think he's saying the Dothan is better for '05
I already know this to be fact ;)Quote:
Originally Posted by HiJon89
I actually did mean the x800 not so much clock for clock but with max clocks the card(s) are capable of.
I'll see if i can dig up some runs I did at 2.6ghz(200x13) w/850 on 5.5 cats. I posted them somewhere around here. Also,the 5.6 cats give about 150 point boost for me over the 5.5's. Did you get a good gain too macci?
So Macci/Kingpin, can we get this clear? Which is better clock-for-clock in 3D-2005, X800 or X850?
We already know that in 3D-2001 X800 is faster clock-for-clock, but I thought that in 3D-2003/3D-2005 they were equal?
Just wondering b/c I am hoping to get a new AGP card next week, and I am having a lot of trouble deciding between X800XT PE and X850XT PE, since they are same price :)
so.. cant you set cas1 on those asus boards?
8k went down fairly easily with all aircooled setup
CPU at only 2.7G, card speed wasn't that high either => 661/648
http://www.akiba-pc.com/d16g/d16g_ma...1_648_8007.PNG
CompareURL
I guess somebody wants to add first to 10k single card in 05 to sit along first to 10K in 03 as well. I would imagine the hunt will be less difficult this time though it seems from these initial results. Good luck.
Regards
Andy
Maybe :DQuote:
I guess somebody wants to add first to 10k single card in 05 to sit along first to 10K in 03 as well.
And lets not forget first to 10k in 2001 too :D
But its still a long way to go but the results I've seen so far are promising. I wonder whats up with the driver being detected as 'non Approved'. The version 6546 is approved and this 6542 is also offical CAT 5.6 driver downloaded from ATI site. I'll try to find the 6546 version and see what it does.
Here is one closest to yours that I have at 2.6ghz(200x13) 590/648 with cat 5.5:
http://pic8.picturetrail.com/VOL256/...6/97680662.jpg
Figure with same core card clocks as yours and the better drivers, I would be probably be around 7700-7800 or so here with x850. I never messed with the timings on the card, only straight clocking. So your looking really good there man. 10k single card 05' would be a killer acheivement macci. I have a few more hundred points possible with my x850, but that's it. No way I'll get over 9700.
ok no need to play with other drivers the 6542s are FM Approved now too.Quote:
I wonder whats up with the driver being detected as 'non Approved'. The version 6546 is approved and this 6542 is also offical CAT 5.6 driver downloaded from ATI site. I'll try to find the 6546 version and see what it does.
kingpin, found a comparo for that (7036) one done w/ X800XTPE at 590/627 and CPU at 2603MHz (217x12):
7328Marks
So yes the clock to clock difference seems to be some 300Marks (slightly lower card mem clock but a bit faster driver too).
I've done some score calculations but not sure if this hardware can actually hit 10k or not. It should come fairly close thou - it pretty much depends on how far this Dothan goes w/ LN2.
If anyone can do it, it's you man. You will prolly need something like 3.6-3.7ghz + on your chip I bet. Defintitely not out of the realm of ln2. I swear these chips clock better every time I run them.Quote:
Originally Posted by macci