OCZ DDR Diagnostic Booster Works on these Motherboards.

Printable View

Show 100 post(s) from this thread on one page

11-26-2004, 12:21 AM
Cranox

Thx for that info AndyOCZ , i have that board soon
Luckely the vmods on that board are very simple
11-26-2004, 12:30 AM
bachus_anonym

so what's the deal with OCZ Booster nad MSI Neo2 Platinum NF3 mainboard?
maximum 3.4v - that what is says on the CZ website. but i see people giving even 3.8v... do they boot @ 3.4v and then adjust to > 3.4v once they are in Windows???
11-26-2004, 09:57 PM
htkm1

Quote:

Originally Posted by bachus_anonym

so what's the deal with OCZ Booster nad MSI Neo2 Platinum NF3 mainboard?
maximum 3.4v - that what is says on the CZ website. but i see people giving even 3.8v... do they boot @ 3.4v and then adjust to > 3.4v once they are in Windows???

Mine is doing 3.6v. As for Adjusting the Booster Voltage, I'll go into Bios, use a multimeter and read the Vdimm mosfet's voltage. then I'll adjust it to 3.6v. Reboot and that's it. Everytime when i on the system it will boot at 3.6v.
11-30-2004, 12:21 PM
andyOCZ

Quote:

Originally Posted by bachus_anonym

so what's the deal with OCZ Booster nad MSI Neo2 Platinum NF3 mainboard?
maximum 3.4v - that what is says on the CZ website. but i see people giving even 3.8v... do they boot @ 3.4v and then adjust to > 3.4v once they are in Windows???

Hello, I have posted B4 that the 3.4v is only the speed TESTED. Not maxiamum. The guys doing the tseting were told to do 3.4v and call it good. the boards that show higher were tested my some of out trusted friends or my one of us at OCZ that has the nerve to go for it . ;)
11-30-2004, 12:27 PM
andyOCZ

K8NS Ultra-939 works with Booster

As the tiltle says, the booster work just fine with the Gigabyte K8NS Ultra-939. Go for it!

Also BIOS F5 is floating around and a link can be forund here:http://www.xtremesystems.org/forums/...543#post614543

It's not yet officially released and fixed many of the issues like the cold boot problem when overclocking. :) Try it.
11-30-2004, 07:33 PM
Joe Camel

Quote:

Originally Posted by Bluesman_dk

Joe Camel: :toast:

I got the same combo.
I'm a bit currious.
Which dimm socket are you running the booster in?

sorry, havent checked back here...ive had it (booster) in 1,2 and 4 with ram in 3/4, 3/4 and 1/2 but NOTHING seems to get my old (BH-5) Mushies or the new (TCCD) anywhere close to what G-Skill can do in this mobo...270+ (dual/1Gig)

any modded BIOSs out there for the AV8? i really want my BH-5 in this thing...
12-03-2004, 06:21 AM
Brum Man

Any news on the booster and any of the NF4 boards, or have none of them been tested yet? (Don't know whether you guys get any versions of the boards to test out before they are released)
12-05-2004, 12:31 PM
clarence

Quote:

Originally Posted by ElixXx

DFI nF3 UT = yes ( 3.6volt ive tested ) , but with 2 DS sticks its unstable cuz the booster dosent fit in slot3 :(

How abt 2xSS dimms??? I have 2x256mb HyperX BH5 waiting for the volts.
What's the deal with slot 3?? Why must it be there?
12-06-2004, 01:33 AM
meke

Can you please create a text base database in the first post?

It's too hard to find your mobo and the confirmation.
12-07-2004, 01:02 AM
dimasdw

i just try OCZ DDR booster on ASUS K8NE but the LED doesn't turn on,there are no problem go to windows,the problem just the LED.now i don't know if this thing work on my mobo or not,somebody can help me?
12-07-2004, 02:56 PM
Bennah

Quote:

Originally Posted by Facedeharicot

Does it work with ASUS SK8N motherboard? :stick:

Also would like to find this out :D

Works on a SK8V, probably the SK8N too?
12-08-2004, 02:18 AM
j0j0

i've a big problem too, if i want to use my ocz booster and 2*256 A-Date nh5 it doesen't work but if i put one stick in , the ocz booster works fine , need help!
that means , i can increase the voltage on the two stick but nothing happend , no difference between 2.6v and ~3.9v , but with one stick and ~3.7v i can boot and run 32m @300fsb without problems, and it makes no difference which stick i use.
bios is 1.36b
12-08-2004, 03:12 AM
Dani

Quote:

Originally Posted by clarence

How abt 2xSS dimms??? I have 2x256mb HyperX BH5 waiting for the volts.
What's the deal with slot 3?? Why must it be there?

It will fit with 2xSS if you pull away those tinycrappy heatsinks from Booster ;)

If I put my Booster in first slot from socket, mobo doesnt boot at all
12-10-2004, 01:08 PM
Joe Camel

Quote:

Originally Posted by dimasdw

i just try OCZ DDR booster on ASUS K8NE but the LED doesn't turn on,there are no problem go to windows,the problem just the LED.now i don't know if this thing work on my mobo or not,somebody can help me?

this is an issue with the PSU...not having a -5V or something...

Quote:

Originally Posted by Dani

It will fit with 2xSS if you pull away those tinycrappy heatsinks from Booster

sure, and if you run 3+ V without sinks on thoes MOSFETS, youll be getting a new booster...cause the FETS fried!
12-11-2004, 01:46 AM
dimasdw

Quote:

Originally Posted by Joe Camel

this is an issue with the PSU...not having a -5V or something...

so how to solve the problem should i use another PSU?
:confused:
12-11-2004, 02:05 AM
cetoole

I have run it in my AN7, had to mod the heatsink so it would fit in dimm 1, because of a cap on the board, but it works fine.
12-11-2004, 03:04 AM
dimasdw

Quote:

Originally Posted by Joe Camel

this is an issue with the PSU...not having a -5V or something...

okay now i change the DDR boster conection from conect with 1st PSU (without -5V) to 2nd PSU (with -5V) {i am use dual PSU }....but the LED only light on once when i turn on PC after that LED light off ,anyone have solution? :confused:
12-11-2004, 12:36 PM
gclg2000

are there plans for a DDR2 compatable booster???
12-11-2004, 11:23 PM
andyOCZ

Quote:

Originally Posted by dimasdw

okay now i change the DDR boster conection from conect with 1st PSU (without -5V) to 2nd PSU (with -5V) {i am use dual PSU }....but the LED only light on once when i turn on PC after that LED light off ,anyone have solution? :confused:

Using dual PSU?? Please try using one PSU with a -5v line.
12-11-2004, 11:26 PM
andyOCZ

Quote:

Originally Posted by gclg2000

are there plans for a DDR2 compatable booster???

I really don't know the answer. DDR2 is low voltage anyway. I'm sure our engineering department is looking into the possibilities.
12-12-2004, 02:01 PM
SteveOCZ

Quote:

Originally Posted by gclg2000

are there plans for a DDR2 compatable booster???

DDR2 cooks with too much voltage from what I've seen
12-13-2004, 02:54 PM
Grov

About the DFI Lanparty Nf3 250GB.

Will it fit with 2 sticks of ram? i seriously doubt it will. Ive just got 2x 512mb of OCZ VX, and i won't be able to push it otherwise. :mad:
12-13-2004, 03:03 PM
jmke

put the Booster in DIMM1 , then 2 other dimms will fit in nicely:)
12-13-2004, 03:10 PM
Grov

Is that because it sticks out more on one side?

All the slots are really close together, same spaces? Are you sure?

Thanks. :cool:
12-16-2004, 02:39 AM
Merlinen

Hi dose the DDR booster work on my EPoX EP-8KDA3+??voltage??
And if so dose i need 2 put my 2x512 in slot 2/3 ???

Show 100 post(s) from this thread on one page