MaximusIV-Extreme Thread

Printable View

Show 100 post(s) from this thread on one page

03-21-2011, 05:37 PM
rabor

Quote:

Originally Posted by st0ned

Uhm I really need better mems, I'm on the hunt for a nice CL7 4Gb kit

I'm still very much loving my G.Skill F3-17600CL7D-4GBXHD's

http://i.imgur.com/u9OT6.jpg

This is at 1.655 Vdimm (the heat-sinks are black btw, not blue as the pic on MemC)
03-22-2011, 01:26 AM
bro20000

Same here mate G.skill rulz with this board!

http://i19.photobucket.com/albums/b1...272MhzCas6.png
03-22-2011, 05:28 AM
Silver Bullet

Hey all,

Having trouble with getting CF setup and working. I know both cards work (by themselves) but it would seem the way I have them in the board that CF isn't recognized. Note also on boot that the 2nd (bottom card) runs with 100% fan and won't spin down on boot or when I get into windows.

PCI-E Setup:

1st - 6970
2nd - empty
3rd - Highpoint RR3510
4th - empty
5th - 6970

I was trying to stay away from having the 2nd 6970 right below the RR3510 to save a little heat and I figured it didn't matter, but it would seem it does? Or is my board just broken :(. Thoughts/solution be great. TIA
03-22-2011, 08:05 AM
alex_tpc

Quote:

Originally Posted by Silver Bullet

Hey all,

Having trouble with getting CF setup and working. I know both cards work (by themselves) but it would seem the way I have them in the board that CF isn't recognized. Note also on boot that the 2nd (bottom card) runs with 100% fan and won't spin down on boot or when I get into windows.

PCI-E Setup:

1st - 6970
2nd - empty
3rd - Highpoint RR3510
4th - empty
5th - 6970

I was trying to stay away from having the 2nd 6970 right below the RR3510 to save a little heat and I figured it didn't matter, but it would seem it does? Or is my board just broken :(. Thoughts/solution be great. TIA

I have a similar setup: 2 VCs and a raid card (LSI 9260-8i). If you have SSDs on raid, you'll want the raid card either in slot 1 or 4 as these don't use the NF200 which will bottleneck tall sequentials due to latency. Wouldn't go more than 800MBps in my ATTO tests on the MivE and UD7--with non-NF200 lanes, it could go to 1600MBps (1GB test, raid cache is 512MB).

However, with 2 VCs on slots 1 and 5, putting the raid card on slot 4 didn't work for me as it couldn't detect the card--I didn't bother booting to see if the VCs will work on SLI. Have not tried to put the raid card on slot 3 as I knew I wouldn't like the result even if it worked. So I ended up with the raid card on 1 and the VCs on the nf200 lanes 3 and 5 as seen here:

http://i404.photobucket.com/albums/p...ivE_1024-1.jpg

The VCs are indeed crowded in there but I plan to watercool them anyway so it works out for me.

On another note, 8GB hypers on tap:

http://i404.photobucket.com/albums/p...3x100_9_-1.jpg
03-22-2011, 08:35 AM
jcniest5

Quote:

Originally Posted by sargatanas

I only changed the vdimm to 1,65 and set the timings like shown on the sticks so far ^^.
Didn't have that much time to test lower timings/higher frequencies

What about the rest of the Menu/Submenu? There are tons of it on this board. I can't go past the Windows logo with any multi 51+ or 5Ghz+. It would just freeze with solid HD LED.
03-22-2011, 08:57 AM
st0ned

Quote:

Originally Posted by alex_tpc

On another note, 8GB hypers on tap:
]

Wow could you link the kit ? How many Vmem ? I wish mine would do that :(
03-22-2011, 09:26 AM
alex_tpc

Quote:

Originally Posted by st0ned

Wow could you link the kit ? How many Vmem ? I wish mine would do that :(

Sorry, didn't mean to imply it's just one 8GB kit. That's 1pc GTX2 and 3pcs GT binned from 2 CMG6GX3M3A2000C7 kits. They're EOL hypers, can't buy them retail anymore.

With 4GB (GTX2 plus top binned GT), spi1m@1.65vdimm/1.135vccio and spi32m @ 1.75vdimm for 2133 7-7-6 with those subs. 8GB needs a bit more as the rest of my GT kits can't keep up with the top two. All of them can do 2133 7-7-6 as 4GB pairs.
03-22-2011, 09:28 AM
Silver Bullet

I just have 4 x 1TB Seagate drives which isn't a huge bandwidth hog. It was more worried about having the VCs the way you have them in your shot. I've run them close together b4 and they' weren't happy at all. WCing isn't really in the cards for me either at the moment.

I wonder why the bottom card isn't being detected properly. IMO it shouldn't matter where the cards are plugged in, they should still be recognized.

Maybe I'll try:

PCI-E Setup:

1st - 6970
2nd - empty
3rd - Highpoint RR3510
4th - 6970
5th - empty

Just going to be worried about roasting the RAID controller.

Quote:

Originally Posted by alex_tpc

I have a similar setup: 2 VCs and a raid card (LSI 9260-8i). If you have SSDs on raid, you'll want the raid card either in slot 1 or 4 as these don't use the NF200 which will bottleneck tall sequentials due to latency. Wouldn't go more than 800MBps in my ATTO tests on the MivE and UD7--with non-NF200 lanes, it could go to 1600MBps (1GB test, raid cache is 512MB).

However, with 2 VCs on slots 1 and 5, putting the raid card on slot 4 didn't work for me as it couldn't detect the card--I didn't bother booting to see if the VCs will work on SLI. Have not tried to put the raid card on slot 3 as I knew I wouldn't like the result even if it worked. So I ended up with the raid card on 1 and the VCs on the nf200 lanes 3 and 5 as seen here:

The VCs are indeed crowded in there but I plan to watercool them anyway so it works out for me.

On another note, 8GB hypers on tap:
03-23-2011, 06:53 AM
initialised

Having trouble getting a couple of systems with M4E (B3 1305 BIOS) stable with 4x4GB XMS3 CMX8GX3M2A1600C9 anyone else tried this RAM with this board?
03-23-2011, 08:28 AM
cstkl1

Quote:

Originally Posted by initialised

Having trouble getting a couple of systems with M4E (B3 1305 BIOS) stable with 4x4GB XMS3 CMX8GX3M2A1600C9 anyone else tried this RAM with this board?

did i miss something

theres a bios 1305??
03-23-2011, 11:20 AM
magnum21

Quote:

Originally Posted by jcniest5

Something that may shed some lights to you OCing experts out there is this: On when the PC is about to freeze after the logo, my HD LED becomes solid. You know, normally the HD LED only comes on when there is HD activity. But this freeze gives my HD LED a solid ON and it will remain like that until I reset the PC. If that tells anything.

Dont know if you fixed this yet but for me I had the same problem and I had to switch my boot drive off of the marvell sata ports and onto one of the others, it works fine now. I now only use the marvell for my dvd drive.
Dont know if that helps at all in your situation.
03-24-2011, 01:21 AM
initialised

Quote:

Originally Posted by cstkl1

did i miss something

theres a bios 1305??

Yes, it's factory installed on all the ASUS B3 boards.
03-24-2011, 05:13 AM
PolRoger

Quote:

Originally Posted by initialised

Yes, it's factory installed on all the ASUS B3 boards.

My B3 came factory installed with 1101 BIOS.

http://i695.photobucket.com/albums/v...cks/B3BIOS.png
03-24-2011, 05:38 AM
deachus

I will let you know what mine comes with, I purchased from Newegg on 3/22/11 and tracking# says out for delivery so I will post back in a few hours.
03-24-2011, 10:12 AM
l0ud_sil3nc3

Quote:

Originally Posted by initialised

Yes, it's factory installed on all the ASUS B3 boards.

mine came with 1101 just like PolRogers, and I see the newer one is 1298, I am going to give it a try out, but so far 1101 has been good to me:up:
03-24-2011, 05:40 PM
crazyea

1101 on my b3 as well
03-25-2011, 02:31 AM
jcniest5

Quote:

Originally Posted by l0ud_sil3nc3

mine came with 1101 just like PolRogers, and I see the newer one is 1298, I am going to give it a try out, but so far 1101 has been good to me:up:

I flashed BIOS 2 to 1298 but BIOS 1 remains 1101. That way, I can switch back and forth between the two if needed. Pretty nice feature for this Dual BIOS board.
03-25-2011, 10:06 AM
Silver Bullet

Follow up to my post above. It's the RR3510 that's causing all my problems. If I use a 5870 everything is good, but as soon as the 6970s go in then I can't get the computer to boot reliably. I'm just going to sell the controller and use the on-board Intel RAID, not really in it for the speed, just the storage protection.

Quote:

Originally Posted by Silver Bullet

PCI-E Setup:
1st - 6970
2nd - empty
3rd - Highpoint RR3510
4th - empty
5th - 6970
03-26-2011, 07:40 AM
deachus

Finally got my Board Thursday and my system together and up and running today. Running LinX at 5Ghz, DDR3-2133, vcore 1.44v at the moment.
Will post up some stability tests and benchmarks shortly. Here are some pics and specs:

System Specs:
Intel i7 2600k
Asus Maximus IV Extreme
G.Skill RipjawsX F3-17000CL8D-4GBXMD +Turbulence II Fan
MSI N560GTX Ti Twin Frozr (Waiting for Waterblock)
64GB Sandforce SSD in RAID0
Samsung BluRay Burner
Corsair AX1200
Corsair 800D

http://i580.photobucket.com/albums/s...M4E_Water1.jpg

http://i580.photobucket.com/albums/s...M4E_Water4.jpg

http://i580.photobucket.com/albums/s...M4E_Water5.jpg

http://i580.photobucket.com/albums/s...M4E_Water7.jpg
03-28-2011, 11:40 AM
seba84_2005

New bios 1303 ;)
03-28-2011, 12:20 PM
l0ud_sil3nc3

Quote:

Originally Posted by seba84_2005

New bios 1303 ;)

thanks bud:yepp:
03-28-2011, 02:41 PM
deachus

Yes, thank you:up:
03-28-2011, 02:46 PM
deachus

I am currently having some issues that maybe someone has experienced or can help.

I am running 50x100 1.43vcore, auto vccio and vccsa DDR3-2133 8-9-8-24-1T and can pass 20 runs LinX but fail in first hour of Prime95 and get random blue screen 124 BSOD. I have tried raising vccio as high as 1.25v and all in between 1-1.25v. I have not changed vccsa from auto so I raised it to 1.11v and am getting ready to run Prime95 blend now and will report back.

Vcore 1.43v
VDRAM 1.65v
VCCIO - auto
VCCSA - 1.11v
LLC 75%

everything else auto

http://i580.photobucket.com/albums/s..._898-24-1T.jpg
03-28-2011, 11:23 PM
FlanK3r

LINX is good only with SP1 win7, otherwise must use PRIME for stability.
03-29-2011, 04:42 AM
deachus

SP1 is installed and still passes 20 runs. I finally got it to pass Prime for 1+ hour. Raised vcore to 1.445v raised LLC 100% raised vccsa to 1.11v and raised vccio to 1.18v

Sent from my HTC EVO using Tapatalk

Show 100 post(s) from this thread on one page