Hello,
I'm wondering if anyone has modded the FC final BIOS for the UD5 rev 2.0 with the latest Intel/JMicron/Realtek ROMs, or if this BIOS already includes such updates.
Printable View
Hello,
I'm wondering if anyone has modded the FC final BIOS for the UD5 rev 2.0 with the latest Intel/JMicron/Realtek ROMs, or if this BIOS already includes such updates.
Good question...anybody?? Reason I'm interested is my WEI dropped to 6.5 from 7.8 (OCZ Vertex 2 120Gb). This is on the Gigabyte sata channel, haven't put it back on the Intel to retest yet.Quote:
Originally Posted by ieatrawbacos
Why are you using the GB SATA channel, you mean the SATA3 chip, or the Gigabyte SATA2? b/c if you are on gigabyte sata2 get it off that port.
Retested on all ports (for comparison) and the WEI has increased to 7.4 ....regardless of blue/middle white/ bottom white Sata channels/ports.
Now why it took moving to another port to increase from the 6.5 - I don't know..but now get the same rating as stated.
I have done no tweaking for SSD, just a windows install on AHCI...oh.. this 930 is OC to 4ghz if that matters.
New beta BIOS is out.
Can anyone tell me if the UD5/7 will do the 4 pci-e slots @ x8-x8-x8-x8???
I don't think either the UD5 or UD7 will do that. But you should check out the Gigabyte GA-X58A-UD9. However, hold onto your wallet and be sure to be sitting down when you scan for a price on that little darling - LOL!
From what I can "cipher" it ought to do x8-x8-x8-x8, and I sure as hell dont want anything with a board NVIDIA chip on it, had enough of that with a P5N32, NOT gonna go that route again. Dont think I need a $600+ board to run 4 5830's either, but cannot get anyone to confirm the UD5/7 will do the pci-e lanes like that....
yes all four will do 8x8x8x8x
Thank you!!!!
Hey guy's, a little off topic to start with.Quote:
Originally Posted by stasio
I just changed ALL the hard drives around in my HAF 932, and for some unknown reason, it stuffed up the bios, and it reset itself, and took ages to sort itself out, so I took the opportunity to flash to the latest FD1 beta, still took awhile to sort it all out, but needless to say, ALL my OC settings are gone, so I have to basically start again :shakes:
Anyway, back on track, and it's probably been there for awhile, but I've noticed the Dynamic Vcore DVID option, but not sure why it's "disabled", there must be another settings required to activate/enable it.
Is it required, or can O/Clocker's do without it ???
I was having a really good run with my OC settings on the UD7 v2, @ 4212, but 2 days ago, had my 1st BSOD, but it was a really hot day, approx 95 F ambient, so I bumped up the QPI a notch. (1.355v)
Running 1.4125 vCore in BIOS, showing 1.392 - 1.408 in CPUz, underload, could I go a little higher ? LLC 2, Spectrum off, etc.
Cheers
UD5 and 7 will do that by spacing is bad, wait for X58A-OC board it will have proper spacing and fit your requirements ;)
Well ive been away for a while so im kind of looking for anything new and what i can do to improve my OC.
http://img831.imageshack.us/img831/9509/68149943.jpg
My system is in the bottom and for cooling im using a H50 Corsair.
hi, what's the best bios for ud7 rev 2.0 now? the FD1?what do i need to have big stability?
GOOC was my fav. You need to do lots of tests for big stability.;)Quote:
Originally Posted by davidexD
Hello guys.
I can't seem to find any thread about gigabyte ga-x58a-ud5 Rev. 1, so is it okay to ask in this thread?
if it is, i will ask you about what BIOS is the best for Rev. 1?
and when will the new X58A-OC board be out?
best regards.
try the EX58-UD5 they have a lot of UD5 rev 1.0 owners there :) i have no clue to be honest
roger, thx ;)Quote:
Originally Posted by sin0822
is it this:
http://www.xtremesystems.org/forums/...ht=GA-X58A-UD5
yea its so long.
is possible to cross-flash ud7 rev2 bios on ud5 rev2???
with my older ud5 i crossed the extreme bios.... LOL
how? I don't think you can, but there is GOOC BIOS for both boards rev 2.0.
i used a special version of: spiflash without id check...Quote:
Originally Posted by sin0822
http://g0rbi.000space.com/index.php?id=11
were can the GOOC be found?Quote:
Originally Posted by sin0822
http://forums.tweaktown.com/gigabyte...tml#post270437Quote:
Originally Posted by dMITIj
dMITIj GOOC is only for UD5/UD7rev 2.0 and UD9 rev 1.0