Wait for X58A-OC board, it should be available soon. And it's a lot better.
Printable View
Wait for X58A-OC board, it should be available soon. And it's a lot better.
It might be better inn many ways, but not when it comes to the color.. It's going to look a lot better when water block are made for it :D
Do you have a ETA on the boards.??
Previews are being posted already... So I guess it should be out in 2 weeks or so. :shrug:
does anyone know if i need a bios update to f5h for the ud9.
my slots 1 3 5 aren't working properly and i had to use slots 2 4 6
i can't want to run a quick OC test option but i need these stupid antenna's for the dlink card.
less and less 1366 mobo's are coming out now so sad but the 990X just released!!!
In case of 3 sticks : I hope you used only the white slots for the triple channel config... and didn't try to boot with your 3 sticks in the blue slots... if you have all slots populated that's another thing
What are you talking about ? Gigabyte releases 3 different types of gamers mobos and one special OC edition. Asus and MSI similar specced Game edition ones. I'm really looking forward to the OC edition of Gigabytes mastermind Dino... or was it the Cookie ?
It was our best friend Cookie :D
Besides getting super high overclocks using LN2, what else would be better on the OC vs a UD9?Quote:
Originally Posted by zalbard
For 24/7 if you want 4-Way, I'd still recommend the UD9. The X58A-OC is lacking in connectivity (which I welcome as I use very few of the IO slots on my UD9, two to be exact).
It has some higher quality components (such as the phases around the socket) and some other sweet stuff. I can't see it making much difference for 24/7 though.
Does anybody have trouble getting a bootable USB to boot with this board? I have this board, it works great but for some odd reason I cannot get a bootable USB to boot off before it enters Windows.
Hello guys,
i have a "little" trouble with Gigabyte X58A-UD9. After last LN2 benching CPU and GPU, my 7 segment display dib a bug 88. I don't know why just after reset and power up still show 88. MB work fain everything is fine only disp no
I know there is some trouble with MB but where?
Anyone helps me? Thank you very much!
http://img291.imageshack.us/i/74687741.jpg/
How much will the X58A-OC be compared to the UD9? Is it really going to be worth it?Quote:
Originally Posted by zalbard
I usually unplug everything else or hit F12, go to HDD, and find your flash drive there.Quote:
Originally Posted by Chrono Detector
Rumor is that it's going to be priced similar to the UD5, though it will not Have any NF200 chips as most expected. This means 4-Way Crossfire will be possible, but only up to 3-Way SLI.Quote:
Originally Posted by DexNfX
Do you have another CPU to test in the board? Every time I have seen 88 on my UD9 the CPU has been dead ;)Quote:
Originally Posted by godzzila
looks as though display thingie is dead but board still alive LOOOLQuote:
Originally Posted by godzzila
I get 88 all the time and it pisses me off a lot... I've never had it from a dead chip, though.Quote:
Originally Posted by Deux
F5L BIOS is released. http://forums.tweaktown.com/gigabyte...beta-bios.html
Also, anyone else notice that the 12v PCI-E (top) molex power connector blocks the use of the silent heat pipe? Seems like a pretty obvious oversight!
that is why you have two different connections on the board
I tried updating this at Q-Flash but it says invalid file size. Don't tell me I have to use @BIOS to update the BIOS, anyone experiencing the same error?Quote:
Originally Posted by Callsign_Vega
Hi Guys,
Have rebuilt my system in a Mountain Mods Extended Ascension Case with a new i7 950 @ 4.6Ghz on a UD9 with F4 bios.
You can see my build log here >> http://www.xtremesystems.org/forums/...d.php?t=267140
Here's my Vantage bench with board settings.
CPU idles at 40c and max at 88c.
Anyone got advice for how to reduce temps a bit and keep 4.6Ghz?
http://w7st5a.blu.livefilestore.com/...age.jpg?psid=1
http://public.blu.livefilestore.com/...636.JPG?psid=1
http://public.blu.livefilestore.com/...651.JPG?psid=1
Quote:
Originally Posted by Chrono Detector
:yepp:Code:* Please use the latest @BIOS or FLASHSPI.EXE to reflash BIOS
1024KB=>2048KB
Oh, I thought with Quad-GPU you are suppose to use both of the PCI-E molex connectors.Quote:
Originally Posted by dinos22
I mean seriously WTF why is Gigabyte forcing users to use @BIOS lately for their latest BIOS'es anyway? It was more convenient when it worked at QFLASH.Quote:
Originally Posted by stasio
Whats wrong with @BIOS? How much easier can it be to launch @BIOS in Windows and a couple of clicks your done?
Not really, especially if you just bought the motherboard brand new and then you'll have to install Windows, very inconvenient and very annoying.
Without to install Windows use FLASHSPI.EXE.:rolleyes: