Benching Team

Printable View

Show 100 post(s) from this thread on one page

08-01-2009, 05:38 PM
[XC] gomeler

I'm using a dual-PCB on dry ice also :) Just using the software right now.
08-01-2009, 07:13 PM
Brian y.

Quote:

Originally Posted by [XC] gomeler

I'm using a dual-PCB on dry ice also :) Just using the software right now.

Are you using an EVGA card?

I have a BFG and Jody mentioned that I need to flash it to the EVGA BIOS as that might help with some of the issues I have been having under cold......
08-01-2009, 08:54 PM
[XC] gomeler

MSI GTX295, haven't had any issues yet. I'm not pushing hard clocks either though, I'm afraid of blowing up this board also :D
08-02-2009, 12:22 AM
Brian y.

Quote:

Originally Posted by [XC] gomeler

MSI GTX295, haven't had any issues yet. I'm not pushing hard clocks either though, I'm afraid of blowing up this board also :D

hahaha.......my board is somehow still kicking with all the times it's condensed. Even has a nice bulge coming from the underside of the board that is growing like a pimple.
08-02-2009, 06:03 PM
Slovnaft

well it was a frustrating weekend.

This is about all i got done:

http://photos-g.ak.fbcdn.net/hphotos..._2149319_n.jpg

http://photos-h.ak.fbcdn.net/hphotos..._1702133_n.jpg

It's an accomplishment, but not quite the caliber i was hoping.
Results soon. I'll drain this tank yet...
08-03-2009, 06:39 AM
Brian y.

Keep it up man:)

Here is the bulge I was talking about it..........it's getting bigger

http://i845.photobucket.com/albums/a...2/IMG_1115.jpg

@gunslinger

Thanks, I will take you up on that offer:up:

btw,

Happy B-Day to the "G" man:pimp:
08-03-2009, 08:06 AM
Slovnaft

@Brian
I see that a lot in boards where hot air reworking has been done improperly resulting in uneven heating. Also iirc that is right below the dimm's buck inductors, so i guess they might be just inordinately heating up, though I couldn't imagine that's the case.
It's certainly not a good thing.

Happy birthday Gautam! I'll splash some LN 'for the homies'.
08-03-2009, 08:21 AM
TheKarmakazi

Happy Bday Gautam :P

@Slov when will you mail out classified? I can mail out eclipse now since its useless for my 920
08-03-2009, 10:45 AM
Slovnaft

Quote:

Originally Posted by TheKarmakazi

Happy Bday Gautam :P

@Slov when will you mail out classified? I can mail out eclipse now since its useless for my 920

I'm finishing up benching today, I'll probably send it our tomorrow.
08-03-2009, 12:42 PM
chispy

Quote:

Originally Posted by TheKarmakazi

@Slov when will you mail out classified? I can mail out eclipse now since its useless for my 920

Whats wrong with your eclipse bro ? low bclk wall :( ?
Hows that board bro ?

Jamie you got PM bro ;).

Angelo.
08-03-2009, 02:31 PM
Gautam

Thanks everyone :)

check out Deanzo's recent super-efficient AM3 runs :eek:
08-03-2009, 03:23 PM
JasonDTM

Quote:

Originally Posted by Brian y.

Keep it up man:)

Here is the bulge I was talking about it..........it's getting bigger

http://i845.photobucket.com/albums/a...2/IMG_1115.jpg

@gunslinger

Thanks, I will take you up on that offer:up:

btw,

Happy B-Day to the "G" man:pimp:

Holy :banana::banana::banana::banana:, is the board de-laminating in that photo?
08-03-2009, 04:05 PM
Slovnaft

Sorry guys,
cpu can't even bench 05 at 4.8 and now my 295 is condensed out of its mind. i'm tired and i have actual work to do. I'll katch up when i get a new chip.
08-03-2009, 04:13 PM
dinos22

Quote:

Originally Posted by Gautam

Thanks everyone :)

check out Deanzo's recent super-efficient AM3 runs :eek:

happy birthday mate

heh deanzo the old fella is doing pretty good there :D:up:
08-03-2009, 04:13 PM
The Nemesis

Starting LN2 runs with Xeon 3540 so far I've had it up to 5.5GHz while just seeing where the BCLK crashes. Odd thing is the system restarts now after I get past -88'C so I'm guessing I need more volt on vtt or something. What voltages do you guys typically have set for vcore & vtt for say a 5.2GHz run?
08-03-2009, 04:21 PM
Gautam

Try 1.55v to start and go easy on vtt (like +200) until you actually need it, and then inch it up slowly. Seems like most d0's run into issues past 1.5-1.55, so if you're beyond that, you might be overdoing it.
08-03-2009, 05:00 PM
Deanzo

Quote:

Originally Posted by dinos22

heh deanzo the old fella is doing pretty good there :D:up:

The sad part of that is, my wee girl turns 12 on Thursday, and it made me feel old thinking about having a teenager in a years time :(

But thanks anyhow :D:D
08-03-2009, 05:13 PM
dinos22

Quote:

Originally Posted by Deanzo

The sad part of that is, my wee girl turns 12 on Thursday, and it made me feel old thinking about having a teenager in a years time :(

But thanks anyhow :D:D

i've still got a few more years up my sleave then :rofl::D
08-04-2009, 06:00 AM
chispy

Just a few Dinos , just a few :ROTF:.

Jamie i need yor help bro , you got PM.

Angelo.
08-04-2009, 08:06 AM
k|ngp|n

Team is currently locked at 24 members and I am not sure we are going to take on much more. Maybe if guys leave they can be replaced with new members. I really like our group and from an overclocking perspectivem, our team is deadly efficient from an overclocker/team total point ratio. Thats cool :)
08-04-2009, 08:14 AM
k|ngp|n

Quote:

Originally Posted by Gautam

Try 1.55v to start and go easy on vtt (like +200) until you actually need it, and then inch it up slowly. Seems like most d0's run into issues past 1.5-1.55, so if you're beyond that, you might be overdoing it.

"Teamspeak" is kept to PM's ONLY until we get the hideout up, ok braniac?
08-04-2009, 09:08 AM
k|ngp|n

hey

Quote:

Originally Posted by 3oh6

yeah, i can't really do much more until i have it up on your server so it will be ready a couple days after i get the info if i am not busy when it comes down the pipeline :up:

checka u pma !!
08-04-2009, 10:09 AM
Gunslinger

Quote:

Originally Posted by k|ngp|n

"Teamspeak" is kept to PM's ONLY until we get the hideout up, ok braniac?

:ROTF: Vince> :cord: <Gautum
08-04-2009, 10:22 AM
Gautam

lol
08-04-2009, 10:38 AM
Nazar

I have a couple days of vacation and decided to help PURE team with PURE HW points :D Hope 75 litters of LN will help me gather 200+ hw points with all of "old" GPU's I have. This is a small part of hardware I have :D

http://s07.radikal.ru/i180/0908/3d/9c6385da646ct.jpg

http://s55.radikal.ru/i148/0908/bf/288e85e4c1eet.jpg

http://s05.radikal.ru/i178/0908/a7/fe4b08e45b5dt.jpg

But cant find water blocks within all of this stuff :(

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:23 AM.

XtremeSystems