UnOfficial EVGA X58 Classified Owners Thread

Printable View

Show 100 post(s) from this thread on one page

05-30-2009, 10:59 PM
Viss

PCI-E 104 is max you used? If so try a bit more.
05-31-2009, 04:06 AM
raptor1

Major Update To The First Page

Let Me Know What Ye Think and If There Is Anything Else That Ye Want Added Let Me Know By PM

Thanks
Raptor1
05-31-2009, 05:15 AM
MiKA7

Quote:

Originally Posted by raptor1

Major Update To The First Page

Let Me Know What Ye Think and If There Is Anything Else That Ye Want Added Let Me Know By PM

Thanks
Raptor1

Nice work done on the frontpage Raptor1!

those of you that have the 759 how high are your nb temps, and what is recommended??
05-31-2009, 05:46 AM
OBR

has someone tested a Xtreme Cooling setting in BIOS and by jumper? Is this the same? I am ready for LN2 session, but i dont know what is better ...

PS. CSC Strap jumper is not working NOW, it is feature for future CPUs ...
05-31-2009, 08:05 AM
road-runner

I love this board and cpu, W3520/760/Corsair GT cas 8 6Gb, and 2-Sapphire 4870x2 with Swiftech Caldera water blocks with modded bios no volt mods. Most of these where done on the OCZ Cyro Z but I did try the F1 Kingpin pot once I seem to have a coldbug around -68c so not much better scores or clocks than the SS. This is Windows 7 64 bit RC1 no tweaks...

cpuz

http://img3.imageshack.us/img3/9344/cpuzdij.jpg

superpi1m

http://img6.imageshack.us/img6/8950/signatureimgh.jpg

superpi32m on water cooling

http://img3.imageshack.us/img3/30/superpi32m.jpg

wprime32m

http://img3.imageshack.us/img3/3963/wprime32.jpg

wprime1024m

http://img3.imageshack.us/img3/360/wprime1024.jpg

pifast

http://img3.imageshack.us/img3/1128/pifast.jpg

AM3

http://img3.imageshack.us/img3/9027/am3l.jpg

3DM01

http://img3.imageshack.us/img3/3755/3dm01.jpg

3DM03

http://img3.imageshack.us/img3/7913/3dm03.png

3DM05

http://img3.imageshack.us/img3/3258/3dm05.png

3DM06

http://img3.imageshack.us/img3/1271/3dm06z.jpg

With water cooling, I have a couple SSDs coming to try to improve PCMark :down:

http://img3.imageshack.us/img3/4647/pcmarkvantaget.jpg
05-31-2009, 08:45 AM
Splave

Quote:

Originally Posted by loc.o

PCI-E 104 is max you used? If so try a bit more.

Tryed up to 112 but no dice, on SS right now. Will see if its still happening at -50c
05-31-2009, 08:49 AM
Splave

http://i42.tinypic.com/2itslrt.jpg

What a difference cold makes :up:
05-31-2009, 10:12 AM
bluehaze

Quote:

Originally Posted by Bobbylite

http://i42.tinypic.com/2itslrt.jpg

What a difference cold makes :up:

Try Channel interleave 2 way, Rank interleave 1 way, probably break 5ghz :D
05-31-2009, 11:23 AM
Splave

ill give her a shot, what exactly do they do?

EDIT

Whatever it does it 5.11

http://valid.canardpc.com/show_oc.php?id=577360

lol
05-31-2009, 01:41 PM
Expat GriZ

@ raptor1 Well done on the changes to the first post!!

@ Bobbylite Very nice!! Can't wait to get home and throw mine under the SS.
05-31-2009, 02:16 PM
BustaH

Quote:

Originally Posted by bluehaze

Try Channel interleave 2 way, Rank interleave 1 way, probably break 5ghz :D

nice clocks on the d0 Bobbylite...and great tip!
06-01-2009, 05:53 AM
cstkl1

so has anybody done 2100 4.4ghz stable with prime95 say 8 hours or so??

still havent seen anything spectacular on this mobo for high stable clocks with high dram speed..
06-01-2009, 07:24 AM
Ace-a-Rue

i did 2 hours..my post is back a few pages..i am not a supporter of 8 hours...to many variables can upset the apple cart even with 8 hours under your belt...i say just do the minimum that you would be using the machine for video games or whatever..if you are talking about folding, you would be crazy to do that at 4.4 ghz...if it was me, it would be a very mild overclock to do folding.
06-01-2009, 07:33 AM
cstkl1

Quote:

Originally Posted by Ace-a-Rue

i did 2 hours..my post is back a few pages..i am not a supporter of 8 hours...to many variables can upset the apple cart even with 8 hours under your belt...i say just do the minimum that you would be using the machine for video games or whatever..if you are talking about folding, you would be crazy to do that at 4.4 ghz...if it was me, it would be a very mild overclock to do folding.

think u missed out the part of dram being 2100mhz.
06-01-2009, 08:15 AM
tekjunkie

Quote:

Originally Posted by cstkl1

so has anybody done 2100 4.4ghz stable with prime95 say 8 hours or so??

still havent seen anything spectacular on this mobo for high stable clocks with high dram speed..

I am tempted to give it a shot with my W3540 after I get my RMAed dom GTs back . The thing is though I am on air, so I am a bit hesitant to run 8 hours prime with that kind of heat it would be generating.

I think that it could be done only with higher binned Elipdas as they seem to require lesser drive strength and most probably only with Xeons as they seem to have better IMCs than the 920 D0s.Just my :2cents:

EDIT: Did you try loosening tRFC?
06-01-2009, 08:43 AM
cstkl1

Quote:

Originally Posted by tekjunkie

I am tempted to give it a shot with my W3540 after I get my RMAed dom GTs back . The thing is though I am on air, so I am a bit hesitant to run 8 hours prime with that kind of heat it would be generating.

I think that it could be done only with higher binned Elipdas as they seem to require lesser drive strength and most probably only with Xeons as they seem to have better IMCs than the 920 D0s.Just my :2cents:

EDIT: Did you try loosening tRFC?

an hour of prime95 large fft custom 5.4gb would do as just want to show dram stability with the qpi..

still undecided to take the plunge as the dfi is still impressive
06-01-2009, 11:47 AM
dejanh

Quote:

Originally Posted by cstkl1

an hour of prime95 large fft custom 5.4gb would do as just want to show dram stability with the qpi..

still undecided to take the plunge as the dfi is still impressive

If you send me a set of 2K CL7 GTs I'd gladly do the test for you :p:
06-02-2009, 06:26 PM
Ace-a-Rue

Quote:

Originally Posted by cstkl1

think u missed out the part of dram being 2100mhz.

i see what you are talking about...but why come in here to ask other than to say, "look at me, i got the better board;" which i do not think is the case.
06-02-2009, 06:56 PM
NaeKuh

Setup:
http://i125.photobucket.com/albums/p...i/IMG_1385.jpg

24/7 settings..
http://i125.photobucket.com/albums/p...nchmark2-1.jpg

heh i dont break 70's on linX and this is with 22-24C ambient.
06-02-2009, 07:18 PM
ACE76

I was about to buy the Classified board today and then saw this in stock and now can't decide!:

http://www.newegg.com/Product/Produc...82E16813131390
06-02-2009, 07:52 PM
jcniest5

Quote:

Originally Posted by ACE76

I was about to buy the Classified board today and then saw this in stock and now can't decide!:

http://www.newegg.com/Product/Produc...82E16813131390

Why do you need that board?
06-02-2009, 08:21 PM
Helfarch

Quote:

Originally Posted by ACE76

I was about to buy the Classified board today and then saw this in stock and now can't decide!:

http://www.newegg.com/Product/Produc...82E16813131390

2 x the NF200
2 x the fail :clap:
06-03-2009, 05:29 AM
ACE76

I had no problems overclocking on the P6T6 and was able to get my C0 920 to 4.4ghz without too much trouble...I will probably still get the Classified just for high BCLK.
06-03-2009, 08:21 AM
Vega

This is maybe a stupid quest but I ask any way! ;)
It does not effect the performance if i put my single GTX295 card to PCIex 2 or 3 instead of PCIex1, Right?
I need that space to cool my chipset on air.
06-03-2009, 09:07 AM
Splave

pretty sure you have to use the top slot if you only use one card, atleast thats what I was told by evga when I was having issues with my pci-e slots.

"Did you make sure the card is in the top PCI-E slot because it needs to be"

Show 100 post(s) from this thread on one page