Yep. http://www.preiscompany.de/ddr2-4096...i-p-21749.htmlQuote:
Originally Posted by ChaosAD
Printable View
Yep. http://www.preiscompany.de/ddr2-4096...i-p-21749.htmlQuote:
Originally Posted by ChaosAD
Thanks a lot Sepander, i ll have a look at the site. I hope they will be able to send in Greece.
Btw i cant understand a thing on the site, and the price of 290 euro is more than crazy tbh.
ROFL. 300 Euro is too much for DDR2.
I know man. They are very expensive but this kit usually is.Quote:
Originally Posted by ChaosAD
I agree its an expensive kit. But 300 dollars in US does not translate in 300 euros. I was expecting to be in the range of 180-200 euros.
I like this memory a lot, i have replaced my transcend 1200 4x1 sticks with a set of theses. So far i have them running @ 1200 default speed with a performance level of 5. They run intel burn test stable kick ass!!!
yes 300 euros is ridiculousQuote:
Originally Posted by ChaosAD
already 300$us is expensive
IntelBurnTest doesn`t stress RAM very muchQuote:
Originally Posted by Commander_HK47
You should use MemTest 3.8 to check the NB<-->RAM stability.
lossened up subtimings n set memory to nominal to see if p35 can pull these babies 1300mhz
did a full pass + 1 pass of test 5 in memtest
Nice work above zsamz, do you remember what PL (performance level) you used and what voltage you were running, thanks?
i used pl9 2.06v didnt tweak they can do pl8Quote:
Originally Posted by Roger_D25
dfi board got so many settings i had forgotten i had everything on verry aggressive lol
1250mhz is enough for me i only need 11k bandwidth for my 24/7
but runnin em 1300mhz you feel the speed;)
if its not to much trouble i would like to know your sub timings and the values you used to get to that speed - thanksQuote:
Originally Posted by zsamz_
1300mhzQuote:
Originally Posted by Commander_HK47
in memset 5-5-5-15-56-9-14-11-3-8-5-6
memory pull is enabled so pl is like 8.2
that was just a test not tweaked bandwith suked
G.SKILL F2-9600 plus GA-EP45-DS5, 80-mm fan - 1534Mhz 5-9-9-25 2х2gb 2.6v
http://s55.radikal.ru/i150/0811/a8/a6fd958cfb9et.jpg
Nice highgertz, lets see some everest scores on the run ??
neo mike
Only validation, recently checked GA-EP45-UD3.
Your able to run these sticks at PL 5 ? i would like to see that, i find that hard to believe
i can get them to run at 1300(1299) with pl5 default timings at 2.133 volts
wow very nice results, i cant get my xtreem teams to run a 5 at 1000mgz, impressive, that asus maxus board , what chipset is that ?
maximus formula converted to rampage formula with bios 410(have not updated to the newer 6xx bios yet). I also cleaned/remounted my north and south bridge coolers
thats impressive board and memory, i know the g.skill 9600 rocks, had no idea could run that low pl, probaly has something to with your board to. The best i can get with my board and memory is pl 7.
its the chips promos likin low plQuote:
Originally Posted by neo mike
powerchips need higher pl
Has anyone picked up the ddr2-1100 version? They are literally half the price as these. I can't see myself spending $300 for a set of dd2-1200 but i can see myself spending $105 on ddr2-1100
the 1100s wont overclock for nothing, i had them and rma them, best i could get was like 1170, and that was pushing hard
Thanks for the info. I guess if I was not looking to OC hard, then the $105 price would be ok for some 1100mhz ram?