Challenge the limitation of Quad-core CPU-DFI LANParty DK P35 First Look

Printable View

Show 100 post(s) from this thread on one page

02-12-2008, 05:56 AM
garson

Quote:

Originally Posted by Peter949

Regarding the Tuniq Tower and the p35 dark. I had to mount it exhausting up instead to back of the case.

Quote:

Originally Posted by Supertim0r

I used a dremel to cut those parts circled in red

edit : be carefull...the way you mounted it, the base will hit the caps

Quote:

Originally Posted by Peter949

ya, I was going to do the same thing this weekend.

So, it's ok when you mount Tuniq exhausting up? Or not?:(
02-12-2008, 07:31 AM
Peter949

Exhausting up you have not problems mounting it.
02-12-2008, 08:02 AM
cyborg939

No esata!
02-12-2008, 08:04 AM
cyborg939

How is this board vs the Foxconn Mars?
02-12-2008, 08:33 AM
wedfighter

you can't compare a $150 board with >$200 MARS :D

btw here my LP DK P35-T2RS
can do 470FSB on air with Q6600

http://img126.imageshack.us/img126/5...superpifn7.jpg

http://img340.imageshack.us/img340/8...nebenchbu3.jpg

my own review here
sorry it's in Bahasa language.. but i believe pic will do the talk then :up:
02-12-2008, 11:33 AM
garson

Quote:

Originally Posted by Peter949

Exhausting up you have not problems mounting it.

Thanks dude.:up: I have Antec 900, so for me it is even better to mount Tuniq exhausting up. :)
Supertim0r confused me a bit with this. :shrug:

Quote:

Originally Posted by Supertim0r

edit : be carefull...the way you mounted it, the base will hit the caps
02-13-2008, 08:35 PM
Supertim0r

Quote:

Originally Posted by garson

Thanks dude.:up: I have Antec 900, so for me it is even better to mount Tuniq exhausting up. :)
Supertim0r confused me a bit with this. :shrug:

the base could hit the caps around the cpu socket when mounted horizontaly
02-13-2008, 08:36 PM
Supertim0r

45nm quad @ 450fsb

edit : this board need a vdroop mod

http://img262.imageshack.us/img262/2...darkqd1.th.jpg
02-14-2008, 02:56 AM
nidecker

Quote:

Originally Posted by Supertim0r

45nm quad @ 450fsb

edit : this board need a vdroop mod

http://img262.imageshack.us/img262/2...darkqd1.th.jpg

Hi Supertimor, how is the vdroop with quad?

1,328 ->load
? -> idle
02-14-2008, 03:44 AM
sonicsallen

I so want this board right now. Too bad newegg and motherboardpro don't have them anymore. Anyone knows a good retailer that still carry them?
02-14-2008, 07:11 AM
Supertim0r

Quote:

Originally Posted by nidecker

Hi Supertimor, how is the vdroop with quad?

1,328 ->load
? -> idle

1.376v idle -> 1.328v load
02-14-2008, 07:12 AM
Supertim0r

Quote:

Originally Posted by sonicsallen

I so want this board right now. Too bad newegg and motherboardpro don't have them anymore. Anyone knows a good retailer that still carry them?

http://www.ncixus.com/products/27638...0P35-T2RS/DFI/
02-14-2008, 08:57 AM
Big Lar

There is a new BETA bios out dated 02/13/08. Says the change has something to do with VTT. I am going to try it later today.

http://www.dfi.com.tw/Support/Downlo...FLAG=B&SITE=US

Larry
02-15-2008, 03:55 PM
Psitech

Motherboardpro is getting a new shipment of these boards next week (feb20) and they currently have them up for pre-order. They listed 15 available but I just pre-ordered mine so they have 14 left right now. I talked to one of the guys from there earlier and he said they should ship out Tuesday.

https://www.motherboardpro.com/cart....&orderids=3667
02-15-2008, 11:28 PM
xploit

Guys my CPU goes from 266x10 to 266x6 when I check CPUID..whats needs to be disable in the Bios before I overclock?
02-16-2008, 01:48 AM
HeadOn

Eist
02-16-2008, 02:18 AM
Counter CS

Quote:

Originally Posted by xploit

Guys my cpu goes from 266x10 to 266x6 in CPUID what needs to be disabled? before IA start overclocking...sorry Im new to INTEL :P

HOo! You have an Q6700 :eek: Cool :up:

What´s your Batch# and VID ?
02-16-2008, 08:14 AM
xploit

Quote:

Originally Posted by Counter CS

HOo! You have an Q6700 :eek: Cool :up:

What´s your Batch# and VID ?

Batch#L724A607 malaysia SLACQ

VID = 1.18
02-16-2008, 10:17 AM
Counter CS

Quote:

Originally Posted by xploit

Batch#L724A607 malaysia SLACQ

VID = 1.18

Can you try 10x 360Mhz 1.35v ?

Show some Prime95 and Core Temp screens. Thx.
02-16-2008, 03:36 PM
xploit

Quote:

Originally Posted by Counter CS

Can you try 10x 360Mhz 1.35v ?

Show some Prime95 and Core Temp screens. Thx.

I will what program do you want me to use?? the one that came with the mobo?? What setting needs to be changed in order to run the memory at 1:1?

EDIT: where do you guys change the CPU voltage on this mobo?? I dont see the setting for it
02-16-2008, 06:22 PM
Lestat

mine does 525mhz FSB w/ my E8400. never really tried higher cuz im on air
500mhz with almost stock chipset vtt fsb and pll voltages.
http://valid.x86-secret.com/show_oc.php?id=307316

havent tried my quad cuz i dont feel like yanking it out of my Maximus.
02-16-2008, 11:07 PM
xploit

http://i122.photobucket.com/albums/o...clockq6700.jpg

Ok I started playing with the VTT and this is what I got. Disable all that other crap that messes your overclock my VID is 1.28 I want to try 1.35V can I get some help here Im gonna prime this sucker soon .
Any tips are welcome! I still can find out how to run the ram 1:1
02-16-2008, 11:54 PM
sonicsallen

Thanks, Supertim0r and Psitech,
I'll order it from motherboardpro when it's back in stock.
02-17-2008, 12:00 AM
zfactor

imo i would do a pre order they said they are selling REALLY fast.. i know they had to special order me one last time i missed them all.. if you want to be gauranteed one i would do the pre order they are supposed to ship next week so its not to far off
02-17-2008, 09:30 AM
Dr. Wakeman

Has someone running Cellshock DDR2-1000 C4 2GB kit on the DK P35?
I can't boot with this sticks.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:31 AM.

XtremeSystems