Gettin started on Wc build ( 56k beware )

Printable View

Show 100 post(s) from this thread on one page

11-04-2007, 05:10 AM
disruptfam

Quote:

Nice blocks, disruptfam! Are those 1/2 inch fittings on them?

yeap all 1/2 fittings :up:
11-04-2007, 05:11 AM
disruptfam

Quote:

Originally Posted by Jedda

My Nf4 is round brass nut, fiber washer, mobo, spring, block, with the screw reaching down from the top.

Like this, except the bottom nut is a big round brass sucker.So no metal washer behind the mobo. Just fiber washer and knurled brass nut.

http://img.photobucket.com/albums/v4...k/Nf4mount.png

oops i have it the other way around.... seem's fine the way i have it though... it is the same for the ek 680i block...???

i'll take a pic show i mounted it...

cheers
11-04-2007, 05:12 AM
disruptfam

Quote:

Originally Posted by severe

looking good bro! loving your setup.

keep us updated :D

cheers!!! thanks mate
11-04-2007, 06:03 AM
Jedda

Nope 680i has the opposite. Screw head behind the board and brass nut above the block.
At least, that's how I did it, following the included instructions.
11-04-2007, 10:27 AM
disruptfam

Quote:

Originally Posted by Jedda

Nope 680i has the opposite. Screw head behind the board and brass nut above the block.
At least, that's how I did it, following the included instructions.

the way i have the nf4 sit's very snug... i don't think i need to change it...i'll try the other way.. and see what sit's better...

having either shouldn't matter yeah??
11-04-2007, 05:16 PM
Jedda

Quote:

Originally Posted by disruptfam

the way i have the nf4 sit's very snug... i don't think i need to change it...i'll try the other way.. and see what sit's better...

having either shouldn't matter yeah??

It would've mattered for clearence on my GTX. The Screw head is different to the 680i screw head, so that it can sit flush into both spring and block when tight. Nothing sticks up higher than the top of the acetal. My vid card runs over the top of one screw just a few mm higher.
11-04-2007, 06:42 PM
disruptfam

oh ok... I'll swap it around then...

i emailed eddy to send out my missing mounting gear no reply as of yet...

cheers
11-05-2007, 02:20 AM
disruptfam

SMALL UPDATE...

leak testing my ek blocks... (sorry about bad lighting it's 8pm @ night)

I touched the bottom of my pump... wow i didn't realize how it gets when everyone said it get's really hot there not kidding!!!
http://img251.imageshack.us/img251/2635/new204fm9.jpg

Just to show everyone contact with ek 680i mofset block is good.. middle chips get contact but with a backplate it would be perfect...

http://img211.imageshack.us/img211/2074/new128il3.jpg

i think my gf has 2 much time on her hand's lol

http://img233.imageshack.us/img233/2037/new097uv0.jpg

http://img253.imageshack.us/img253/6681/new102eh8.jpg

That's all for now more update's soon...
11-05-2007, 05:59 PM
disruptfam

small update

Got my ram today.... 4gb g-skill DDR2 800 (PC6400 - 6400PHU2-2GBHZ) 4-4-4-12 2.1v

http://img264.imageshack.us/img264/660/new206pe5.jpg

http://img80.imageshack.us/img80/3803/new210jc1.jpg

4gb ram for a bargaintastic price... :up: :up: can't wait to see how much improvement i get on vistat64

that's all for now more updates soon!!

cheers
11-06-2007, 04:54 PM
severe

*jealous*

grats man :D
11-06-2007, 07:47 PM
disruptfam

Quote:

Originally Posted by severe

*jealous*

grats man :D

LOL cheers mate :up:
11-06-2007, 08:09 PM
Patriote

Hey hey! Damn, same ram, same amount of it and about to install Vista X64! I seen this before :p:

You won't be disappointed m8! 4GB and Vista X64 runs super-fine for me.
11-06-2007, 08:10 PM
disruptfam

Quote:

Originally Posted by Patriote

Hey hey! Damn, same ram, same amount of it and about to install Vista X64! I seen this before :p:

You won't be disappointed m8! 4GB and Vista X64 runs super-fine for me.

woohoo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :up: :up: :up: :up: :up: :up:
11-08-2007, 02:19 AM
pattherat111

Hey
i didnt read the whole thread but i was wondering where you got the ram from
11-08-2007, 02:26 AM
Jedda

Hey Pat, you're missing a star!
11-08-2007, 06:32 AM
disruptfam

Quote:

Originally Posted by pattherat111

Hey
i didnt read the whole thread but i was wondering where you got the ram from

www.itsdirect.com.au :up:
11-08-2007, 04:42 PM
Patriote

Quote:

Originally Posted by Jedda

Hey Pat, you're missing a star!

I don't get it :p:
11-08-2007, 05:09 PM
Jedda

Quote:

Originally Posted by Patriote

I don't get it :p:

Six stars in the Southern Cross -Crux Australis- plus one large seven pointed star under the Union Jack, makes up the aussie flag. Pat the rat (long running Oz TV character) lost one in his/her avatar.
11-08-2007, 05:53 PM
Patriote

Quote:

Originally Posted by Jedda

Six stars in the Southern Cross -Crux Australis- plus one large seven pointed star under the Union Jack, makes up the aussie flag. Pat the rat (long running Oz TV character) lost one in his/her avatar.

I REALLY don't get it :shrug: ROFL
11-08-2007, 05:58 PM
disruptfam

Quote:

Originally Posted by Patriote

I REALLY don't get it :shrug: ROFL

There's supposed to 7 stars on his flag but there is not!!
11-08-2007, 08:01 PM
disruptfam

UPDATE!!!

Got my scythe kaze ultras today!!! :up:

http://img231.imageshack.us/img231/8154/new217mt9.jpg

http://img98.imageshack.us/img98/7522/new222lu2.jpg

http://img48.imageshack.us/img48/9418/new221ri2.jpg

Thickness difference.... Scythe on the right...

http://img137.imageshack.us/img137/1797/new216jb1.jpg

Giving my fan's a bit of a test.... right to left antec tri-cool > lian li case fan > scythe kaze ultra 2000rpm x2

http://img219.imageshack.us/img219/8434/new212bh5.jpg

that's all for now

ENJOY!!!!!!!!!
11-08-2007, 08:14 PM
Nate P.

Those look like sick fans... how much were they?
11-08-2007, 08:19 PM
disruptfam

i got them $20each is Aus... $12 in US abit pricey but think there worth it... there fairly quiet there is a slight buzzing noise @ full speed @ medium they still blow a fair of air but are alot quieter, but i think will improve when i run the fan's for awhile... .I'm getting a yate loon medium in and i have a couple fan's hanging around the house i would like to compare to the scythe ultras kaze's...

I will let everyone know how they compare...

http://www.scythe-usa.com/product/ac...38_detail.html
11-08-2007, 08:45 PM
Nate P.

Quote:

Originally Posted by disruptfam

i got them $20each is Aus... $12 in US abit pricey but think there worth it... there fairly quiet there is a slight buzzing noise @ full speed @ medium they still blow a fair of air but are alot quieter, but i think will improve when i run the fan's for awhile... .I'm getting a yate loon medium in and i have a couple fan's hanging around the house i would like to compare to the scythe ultras kaze's...

I will let everyone know how they compare...

http://www.scythe-usa.com/product/ac...38_detail.html

Awesome, but I agree, $12 is a tiny bit on the pricey side. Keep us updated!:D
11-09-2007, 02:19 AM
Waterlogged

Quote:

Originally Posted by disruptfam

i got them $20each is Aus... $12 in US abit pricey but think there worth it... there fairly quiet there is a slight buzzing noise @ full speed @ medium they still blow a fair of air but are alot quieter, but i think will improve when i run the fan's for awhile... .I'm getting a yate loon medium in and i have a couple fan's hanging around the house i would like to compare to the scythe ultras kaze's...

I will let everyone know how they compare...

http://www.scythe-usa.com/product/ac...38_detail.html

Yes please do. I'm particularly interested in comparison to the D12SM-12 your getting. I just ordered a couple more YL SM's from Petra because I wasn't sure on how quiet these Ultra Kaze's are. :shrug:

Do they list a static pressure number anywhere on/in the packaging?

Show 100 post(s) from this thread on one page