SPI 1M 8.843s by NewBeetle (Team Japan)

Printable View

Show 100 post(s) from this thread on one page

08-02-2007, 09:50 AM
PPInDaHouse

congratulations New Beetle your results are awesome :)
08-02-2007, 11:07 PM
NewBeetle

Many thanks always!!!
Stapler-san, OC_Windforce-san, 1Day-san, asterix34-san, pranko1-san, luihed-san, Gautam-san, ent-san, PPInDaHouse-san :toast:

Quote:

Originally Posted by Stapler

^Apparently we have different definitions of good.

I expect that it will become new definitions in FSB1333MHz-CPUs time. :D

Quote:

Originally Posted by 1Day

I feel like I am sitting in on a master class of Sub Zero overclocking and benching :up: :clap: , New Beetle-san you are a great teacher and your willingness to share your experiences and knowledge is greatly appreciated by me and I am sure by all members here. May Team Japan and all its members prosper and continue to have good luck. Thank you.:)

Sharing our experiences and knowledge is Team Japan's policy. ;)

Quote:

Originally Posted by asterix34

Congratulations,more two WR::clap: Fsb 620 Mhz.:shocked: great work,bravo Newbeetle san

I love your signature.
Especially, "I LIKE JAPAN" ･･･ :D

Quote:

Originally Posted by luihed

Youre welcome :).. I have an E6700 coming ( L626B ), maybe you can wish the same for me ;)

I tried using dry ice on the chipset and my commando's max fsb on 1066strap went from 490fsb to almost 520fsb... but my pot was just a nb cooler with a bunch of dry ice on top lol.....

http://www3.telus.net/luis99/oc/nbcooled.JPG

Your COMMANDO is very nice.
Of course, your overclocking also. :up:

Quote:

Originally Posted by Gautam

I notice that NewBeetle-san is only running the northbridge at -10C, so it doesn't seem like that'd take anything too elaborate.

Whatever works,right. :D

I love seeing xtreme northbridge cooling. The only time I tried it was on an i875 board...don't have any two containers that can fit properly atm on new boards. :-/

I think the NB cooling about 0C is possible without the copper pot.
On aircooling, Dry Ice can be put directly on the heatsink.
On watercooling, if rageetar is cooled with ice, it is likely to get cold up to about 5C. ;)

Quote:

Originally Posted by ent

Congrats on new WRs NewBeetle! 9x617 runs are just awesome! :clap:

Why did you go back to P5K from P5K-E?

Under LN2, my P5K is higher FSB than my P5K-E.
P5K-E's FSB limit was about 600MHz @x9 CPU Ratio. :(

DEWA DEWA ～
NewBeetle
08-03-2007, 06:48 AM
Timbosan

Congratulations on the new records! Very impressive! :up: :clap:
08-03-2007, 11:41 AM
asterix34

Quote:

Originally Posted by NewBeetle

I love your signature.
Especially, "I LIKE JAPAN" ･･･ :D
NewBeetle

I like japan I like Team japan :ROTF:
08-04-2007, 12:49 PM
mup0

how u disable 1 core of the cpu?What is the name of that option...
08-05-2007, 01:17 AM
T_M

in boot.ini: \numproc=1
08-05-2007, 03:41 AM
pranko1

Congrats!:up:
08-06-2007, 07:56 AM
Zannema

Quote:

Originally Posted by NewBeetle

Under LN2, my P5K is higher FSB than my P5K-E.
P5K-E's FSB limit was about 600MHz @x9 CPU Ratio. :(

DEWA DEWA ～
NewBeetle

New Beetle i will try with p5k because my p5k-dlx have some problem:shakes:
08-06-2007, 08:06 AM
boblemagnifique

P5K Green is very good Motherboard

I test 6xP5K and all Fsb 600 easy (617mhz mini because cooling limited) and 644mhz (cpu limited :D)
08-06-2007, 08:35 AM
eva2000

Quote:

Originally Posted by NewBeetle

Hi, filmbot-san and all :)
I tested Dry Ice-cooling for the chipset.
32M might run by FSB620 or more if holding out a little more. :D

modPI 8M new WR : 01m52.937s @5590.0MHz (FSB621.1MHz x 9)
http://homepage2.nifty.com/NewBeetle/8M_9x621_01m52s937.png[/IMG]

modPI 16M new WR : 04m10.437s @5559.5MHz (FSB617.7MHz x 9)
http://homepage2.nifty.com/NewBeetle/16M_9x617_04m10s437.png[/IMG]

(Set up)
M/B：ASUS P5K Rev.1.02G VMod (75MOACD45***/P5K0408.ROM)
M/B Bed：「V-TEC ARC Bed Rev.3.3」
NB cooling：Tara-chan 1st (mini copper pot) + Dry Ice/temp (-)10C-(+)5C
SB cooling：Swiftech MCX159-R + FAN + Torii-kun-mini (by Tam)
CPU：Intel Core2 E6700(L633A549#7)
CPU cooling：MaxxNEO + LN2/temp：-155C
Memory：Team Xtreem PC2-8500 C4 1GBx2 4-4-4-4
VGA：Matrox Millennium PCI 2MB
HDD：Western Digital WD360ADFD
Power Supply：OCZ PowerStream 520W
Vcore：1.830V(Actual)
Vio：3.50V(PC Probe 2)
Vdimm：2.65V(Actual)
OS：Windows Server 2003
Remarks：FSB550MHz x 9@boot

http://homepage2.nifty.com/NewBeetle...+Tara-chan.jpg

woah congrats NewBeetle ... very nice FSB there :D
08-06-2007, 03:34 PM
NewBeetle

Thank you always, Timbosan-san, asterix34-san, mup0-san, T_M-san, pranko1-san, Zannema-san, boblemagnifique-san, eva2000-san :toast:

Quote:

Originally Posted by mup0

how u disable 1 core of the cpu?What is the name of that option...

Quote:

Originally Posted by T_M

in boot.ini: \numproc=1

Thanks T_M-san. ;)

Quote:

Originally Posted by Zannema

New Beetle i will try with p5k because my p5k-dlx have some problem:shakes:

P5K Vanilla seems to be good in my case. :cool:
And vmod is here.
Good luck! :up:

Quote:

Originally Posted by boblemagnifique

P5K Green is very good Motherboard

I test 6xP5K and all Fsb 600 easy (617mhz mini because cooling limited) and 644mhz (cpu limited :D)

Thank you for your information. :)
You test 6xP5K!!! :eek:
I also love P5K but only one.....:p:

Quote:

Originally Posted by eva2000

woah congrats NewBeetle ... very nice FSB there :D

Many thanks always, eva-san. ;)
If you change mobo to P5K, your E6600 L709A958 may have more high FSB. :D

DEWA DEWA ～
NewBeetle
08-06-2007, 08:31 PM
eva2000

Quote:

Originally Posted by NewBeetle

Thank you for your information. :)
You test 6xP5K!!! :eek:
I also love P5K but only one.....:p:

Many thanks always, eva-san. ;)
If you change mobo to P5K, your E6600 L709A958 may have more high FSB. :D

DEWA DEWA ～
NewBeetle

thanks might need sub zero cooling as E6600 L709A958 only did 485FSB max on Asus Blitz Extreme on water cooling... P5K Deluxe probably better FSB wall ?

Is that P5K not the P5K-E from http://www.xtremesystems.org/forums/...d.php?t=151968 ? Guess that board retired :D
08-06-2007, 10:16 PM
NewBeetle

Quote:

Originally Posted by eva2000

thanks might need sub zero cooling as E6600 L709A958 only did 485FSB max on Asus Blitz Extreme on water cooling... P5K Deluxe probably better FSB wall ?

Is that P5K not the P5K-E from http://www.xtremesystems.org/forums/...d.php?t=151968 ? Guess that board retired :D

Hi, eva-san
Exploded P5K-E is still alive! :D
1M & 32M WR were taken by it. ;)
However, my P5K-E is inferior to my P5K vanilla by the point of FSB. :(
08-07-2007, 01:11 AM
Misko

Sorry I'm late for this overclocking grand festival! ( holiday business :toast: ) What can I say then superbbbb work NewBeetle :clap: :clap: :clap:
08-07-2007, 02:29 AM
NewBeetle

Quote:

Originally Posted by Misko

Sorry I'm late for this overclocking grand festival! ( holiday business :toast: ) What can I say then superbbbb work NewBeetle :clap: :clap: :clap:

Thank you for your congratulations, Misko-san :toast:
I did not see you as much as one month in XS. :(
I am very glad to see you again. ;)

DEWA DEWA ～
NewBeetle
08-07-2007, 02:39 AM
ANP !!!

OMG.. this is hair raising :eek:

well done Team Japan.
08-07-2007, 10:41 AM
Misko

Quote:

Originally Posted by NewBeetle

Thank you for your congratulations, Misko-san :toast:
I did not see you as much as one month in XS. :(
I am very glad to see you again. ;)

DEWA DEWA ～
NewBeetle

I'm here now NewBeetle-san :up: , when I read 5.8 I thought I didn't see well, number 8 after 5ghz is very very sick combination :). Summer will end soon and new ocing sessions will start, Team Serbia must prepare good.... competition is very very strong, stronger then ever before!

Best Regards

Misko
08-07-2007, 02:09 PM
rra

Wow NewBeetle this thread started strong and got stronger as you went on unbelievable 32ml suppi. To hold those temps with your "baby" cooler on its own was unreal and would have been fun to watch:clap: Very Very well done on a great job and tight benching. Team Japan stays Suppi kings
Now you can rest and watch .;)

:clap: :clap:
08-07-2007, 03:25 PM
NewBeetle

Many thanks all!!! :toast:

Quote:

Originally Posted by ANP !!!

OMG.. this is hair raising :eek:

well done Team Japan.

Hi, ANP !!!-san.
Your Avatar is so cute. ;)
I like it. :D

Quote:

Originally Posted by Misko

I'm here now NewBeetle-san :up: , when I read 5.8 I thought I didn't see well, number 8 after 5ghz is very very sick combination :). Summer will end soon and new ocing sessions will start, Team Serbia must prepare good.... competition is very very strong, stronger then ever before!

Best Regards

Misko

I am waiting for your great results as always. ;)
Good luck, Misko-san & Team Serbia!!! :up:

Quote:

Originally Posted by rra

Wow NewBeetle this thread started strong and got stronger as you went on unbelievable 32ml suppi. To hold those temps with your "baby" cooler on its own was unreal and would have been fun to watch:clap: Very Very well done on a great job and tight benching. Team Japan stays Suppi kings
Now you can rest and watch .;)

:clap: :clap:

Thank you so much, rra-san. ;)
Now I rest a little. :p:
But I am preparing little by little for a better result. :D

DEWA DEWA ～
NewBeetle
08-07-2007, 06:41 PM
erwinz

Quote:

Originally Posted by NewBeetle

Thank you so much, rra-san. ;)
Now I rest a little. :p:
But I am preparing little by little for a better result. :D

DEWA DEWA ～
NewBeetle

thats way I always visit this post.. :) looking forward for it NewBettle.. goodluck getting good hardware.. :D
08-07-2007, 06:47 PM
OC_Windforce

Hi~ Newbeetle-san
My P5K(Vcore , Vdroop MOD) ....
When 1.72v it is above and the OVP is operated :mad:
After window entering it becomes the rebooting
(Vocre Monitoring Ignore)

Plz... OVP MOD :)
08-07-2007, 10:26 PM
NewBeetle

Quote:

Originally Posted by erwinz

thats way I always visit this post.. :) looking forward for it NewBettle.. goodluck getting good hardware.. :D

Thanks always, erwinz-san. ;)
Next I will try DFI P35 board..... :D

Quote:

Originally Posted by OC_Windforce

Hi~ Newbeetle-san
My P5K(Vcore , Vdroop MOD) ....
When 1.72v it is above and the OVP is operated :mad:
After window entering it becomes the rebooting
(Vocre Monitoring Ignore)

Plz... OVP MOD :)

Hi, OC_Windforce-san. :)
I'm very sorry that vmod is not my specialty. :(

I hear from OMEGA-san and kyosen-san about this problem.
They have not succeeded yet though they tried variously.
It seems to decide the limit of Vcore by the individual difference of "ADP3198".

But we have only one method.
First, boot @ low Vcore.
When OS starts Vcore is raised.
It is likely to become 1.9V or more if going well.
Please try it once. :up:

DEWA DEWA ～
NewBeetle
08-08-2007, 12:06 AM
OC_Windforce

But we have only one method.
First, boot @ low Vcore.
When OS starts Vcore is raised.
--------------------------------

If it uses the method to inform, it becomes the Reebting.. :(

Thanks Neebeetle-san ;)

Korea Retail P5K-E & P5K-D & P5K All Cold bug :mad: :shrug:
08-08-2007, 02:20 AM
Monstru

:bows: to the kings of Super Pi. I suppose that 6Ghz and 7.x sec will soon become reality, and I have a strong feeling that Team Japan will be among the first to do so.
08-08-2007, 03:50 AM
DEVIL K-ce

Quote:

Originally Posted by OC_Windforce

Hi~ Newbeetle-san
My P5K(Vcore , Vdroop MOD) ....
When 1.72v it is above and the OVP is operated :mad:
After window entering it becomes the rebooting
(Vocre Monitoring Ignore)

Plz... OVP MOD :)

First :)

NewBeetle - congratulations for Your road to domination on SPI.

Next :

OC-Windforce : You have no lucky with this mobo; my P5K can easy boot, and go to windows, next operating at 1.92V+ with no problem.
But I have small problem with FSB :confused: 537MHz is max from Windows and max from bios :rolleyes: To low speed for me :D

I don't see any OVP mod for this mobo already.

Martin

Show 100 post(s) from this thread on one page