15x272.6 should be 17 ;)Quote:
Originally Posted by charlie
Printable View
15x272.6 should be 17 ;)Quote:
Originally Posted by charlie
japan is decreasing the ln² amount of the world :stick:
dothan => :slobber:
Thank you all for your compliment on and encouragement to kaz-n's great achievement. He really appreciates it...
For you, how can I refuse your requests :D :)Quote:
Originally Posted by cpulloverclock
Kaz-n told us already he would be off this weekend, but would try other benches probably next week.
Yes, but it is a cheat-free that you guys want to see, if I recall.Quote:
Originally Posted by NiCKE^
Yes, but it is quite difficult to achieve 17s accoding to kaz-n......Quote:
Originally Posted by charlie
Probably, we can guess when we see more results by memesama & TAM with their M 780ES hopefully in this weekend.
Hahaha, we have been depleting LN2 for long time now so we import almost everything besides LN2 but exporting mighty fine products..Made in Japan :DQuote:
Originally Posted by Jort
Well, i think there will be plenty of N² for the japanese overclockers, as it makes up 78% of the atmosfere.. You just need to cool it down ;)
Message from Hlolicho-san:
It’s been a while since I am responding in the name of Holicho.
What a nice of you and thank you so much for remembering me.
I am quite healthy and am really into playing golf these days.
By the way, I have kept open my homepage because I may come back to OC life again by some chance....
I wish you all my best regards, a good health and a happy OC life.
Thanks for the update from Holicho
He will be remembered as a legend here at XS.
Thank you very much for your hearty comment.Quote:
Originally Posted by FUGGER
I bet he is more than happy to hear from you- a legend at XS :)
nVIDIA should make a show like ATi did, just in Denmark this time, and with all the stars like OPP, Macci, FUGGER, Kingpin, Shamino, Sampsa, OPB, Charlie, (all the western ones i forgot) and Futto kun, memesama, Holicho, Kaz-n.. :)
Unbelievable results from all of team japan :toast:Quote:
Originally Posted by PRTeamJapan
If you dont mind me asking, are these guys using a vid-switching mod using a dipswitch to get the chips stable over 1.65v, as opposed to standard vcore mod + u-wire(vid4 to vss) on the p4c800?
Is there a link to any of kyosens work with the adapter/p4c? I would appreciate that very much if possible.
Something like in these pics?:
By memesama
His comment: could not reach 4G nor 18s-- will try more...
CPU：PentiumM780ES 7506B・・・
M/B：ASUS P4C800ED 53MG Bios10001.023/CT-479
RAM：KHX3500 256MB×2
CPU Cooler：Kuri Pro3 LN2
Vcore:1.715V(Actual)
Vddr：3.43V(Actual)
Vio:3.65V(Actual)
VGA:CANOPS PWR128
Power suplｌｙ：OCZ520W
OS：Windows Server 2003
200MHz 2-2-2-5-4-E-A-A
HDD：IBM DTLA 15G
http://blue.ap.teacup.com/memesama39...1119745086.jpg
http://blue.ap.teacup.com/memesama39...1119745117.jpg
Can't he bench with his Rams over 270MHz?.....I've noticed that when I bench with my Rams at almost 250MHz and then at over 270MHz(273MHz) and in the exact same frequency, I have a gain ALMOST 1sec in Super-Pi 1M..... :)Quote:
Originally Posted by PRTeamJapan
I bet that if he can do 271MHz x 14 multi, he could get 18sec..... ;)
yes, there is a problem between dothans FSB533 and a great ram frequency??
I dont understand, kaz-n runs his rams at 235-240 and memesama too
Quote:
Originally Posted by hipro5
Thank you hipro5 for your reminder
Yes, that is what he thinks and is trying to get 18s without going over to 4G :)
No I don't think that there is a problem.......At least I dont have with the P4P800-SE mobo and with the 770 CPU.... :)Quote:
Originally Posted by cpulloverclock
I can bench Pi-Fast up to 273MHz and Super-Pi up to 274MHz with a room temp at 28*C.......If I had my aircondition working(compressor is dead) , I think I could get another 1 to 2 MHz more out of these Rams......I also think that if I put it into phase change, I could get my Rams a bit higher than that......All of those with Cas 2-2-2-5-Enable-8T-7.8us and Performance to Turbo as for the BH-6 and BH-5 chips..... ;)
have u considered that maybe it should be difficult to be stable with that high fsb on that high speed?
Accoding to Vigor, he was able to push up to FSB275 during testing out his new Rev12 Pot/M750 and got 20s as before but picture is @ FSB260.8 hereQuote:
Originally Posted by cpulloverclock
Apparently, some memory works very well but others ??-- a bit of peky as you have guessed...
Owing to Vigor's ARC Bed and ARC Pot, we, at Team Japan, can achieve--no questions about.
He is our treasuer :) as him being an LN2 expert and his very logical craftmanship-- that is the name of the game....
Vigor's LN2 pots are trully great performers too bad there aren't many details and pictures available (or that i've seen).
very cool stuff!
the dothan are comparible with the amd xp +2600's in their time.
unfortunately that they're a special socket type and the motherboards aren't that cheap but the performance :slobber: .
The ram problem isn't such a big problem I think.
Xyus
By TAM
Air Cooling:
Time: 23s (Original SuperPI 1M) , 23.735s (MOD1.4 1M)
Clock：3028.2MHz (fsb252.4Mhz x12)
CPU: Pentium M 780 ES
M/B: ASUS P4C800-E (34MG / BIOS:10001.023) + CT-479
CPU Cooling: COOLER MASTER Cyprum + 8cmFAN(0.24A,2800rpm)
Memory: A-DATA PC3200 (Winbond 2332D/234WD) 256MB x2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307015
Power Supply: Aopen FPS530-60GN
Vcore: 1.58v (CPU-Z)
Vddr: 3.50v, Vio: 3.60v, Vagp: 1.95v
OS: Windows Server 2003
MEM: 400MHz, Turbo, CL2.0-2-2-5-4-E-A-A (1:1 200MHz)
Room Temp 25℃
http://u-san.net/c-board/file/M780-3028_23s735.gif
LN2 Cooling
Time: 19.000s (Super PI / MOD1.4)
Clock：4087.2MHz (fsb240.4Mhz x17)
CPU: Pentium M 780 ES
M/B: ASUS P4C800-E (44MG / BIOS:10001.023) + CT-479
CPU Cooling: LN2 (Pro3 + V-TEC ARC Bed Rev.3.4)
Memory: Kingston KHX3500 CL2 256MB x2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307015
Power Supply：OCZ PowerStream 520W
Vcore: 1.721v (Actual)
Vddr: 3.65v, Vio: 3.73v, Vagp: 1.98v
OS: Windows Server 2003
MEM: 400MHz, Turbo, CL2.0-2-2-5-4-E-A-A (1:1 200MHz)
http://u-san.net/c-board/file/M780-4087_19s000.gif
240!!!!!!!!!!!
why???