But yonah still will be fun :D
Printable View
But yonah still will be fun :D
The Aopen boards should be in Sweden 10th of April. I doubt I will buy one since I've seen the Conroe results.
Conroe will run on the Aopen or not ?Quote:
Originally Posted by NiCKE^
I almost had the certain that it will
Little help ;P
no :P conroe = desktop
merom will run in aopen if the certain chipset is on it!
Sorry my mistake , lots off exams don´t give me a lot of free ram on my memory to process all the new names :PQuote:
Originally Posted by Waus-mod
Thanks for the answer
A 3ghz SuperPi 32M will probably be equal to AMD WR 32M :P
Haven't seen such an ownage for ages :DQuote:
Originally Posted by NiCKE^
Looking forward to se LN2 and cascade on the conroes but the Yonah's are more likely to get first on such cooling since there's only M/B left to get for 'em.
My new dice container already prepared, thanks mrlobber :D
Damn, I have everything but board :(
Quote:
Originally Posted by kiwi
Everywhere the same situation...
In every single corner of the world(ecxept 2-3 corners:P) everybody have everything but not the board...:P
hehe, Gorilla and the other of ya, in case its not availible on monday in your contries, send me a PM and I'll get ya one, its launched on monday in DK, and the source is Denmarks largest importer, I dont remember when they were wrong last... :)
hicookie: Come on, try the 266 MHz pin mod!
Just chill, we already have the first results, I'm sure hicookie will try to improve them ;)
Quote:
Originally Posted by M.Beier
I have already ordered one from JP...
and hipro already has as i know...
esdee doesn't even want to touch intel things.....:D
what kinda temp is it @ 2.9ghz? and is it at stock v.core?
The problem is, being a mobile processor, the current boards that I have seen don't have any multiplier adjustment at all. The Aopen board (which looks to be the best one) doesn't, so you're limited to overclocking the FSB, even on a Yonah ES.Quote:
Originally Posted by NiCKE^
Quote:
Originally Posted by Mats
how?
my friend coolaler's t2600 air cooling @3.36G-screen, 3.1G 32M pass, mine is not good.:(
gona buy new t2600.
What was his time on th 3.1G 32m?Quote:
Originally Posted by hicookie
cookieQuote:
Originally Posted by hicookie
send the old one to me :-)
if you don`t need it anymore
dogsx2> 18'"05'
get to work now :mad:
http://i22.photobucket.com/albums/b3...e/d2571aec.gif
find fb
http://i22.photobucket.com/albums/b3...e/a09b5a49.jpg
i can't sure which pin? official no datasheet:(
http://i22.photobucket.com/albums/b3...e/6c2e3b87.jpg
:eek: :shocked: :shock2:Quote:
Originally Posted by hicookie
any pics of that one?
coolaler's t2600+ aopenQuote:
Originally Posted by mrlobber
http://www.coolaler.net/YONAHT2600/27.gif
max fsb 259
http://www.coolaler.net/YONAHT2600/32.gif
if anyone has isl6262 datasheets ,pleasse mail mertl.studio@msa.hinet.net
i find my is step 4 not new step 8.
[QUOTE=hicookie]coolaler's t2600+ aopen
http://www.coolaler.net/YONAHT2600/27.gif
Thanks, I sure hope I can get a mb soon. Those spi times just blow me away.
so 259 is max fsb? or the max from the chip?
max from the chip, aircooling.:rolleyes: :slobber:Quote:
Originally Posted by Waus-mod
w000t :D haha.. whens the "better" cooling? ;)
Does clockgen work on aopen?
yeaah. i also would like to know that.
no,:(Quote:
Originally Posted by kiwi
Now thats gonna be a problem...
What did you tried? if you can look up what pll i can ask franck from cpuz
Did you also tried the ICS 9541XX pll ?
yep,Quote:
Originally Posted by Waus-mod
finally, adjust fsb by bios+remote control:D
Well, but wasn't 255 fsb max in bios for the Aopen board? Then how did they manage to get over that?Quote:
Originally Posted by hicookie
Edit: I see :D ^^^ Would that mean that theoretically also 300 fsb and more is possible as long as the chipset and the chip itself manage to keep up?
to bad :( i still love clockgen more.
remote control,can adjust above 255+Quote:
Originally Posted by mrlobber
Great, now only one issue... If remote turns on computer when I drop something on it and pump + mach II's turned off = fried computer :mad:Quote:
Originally Posted by hicookie
Well, those things aren't made with unhandy person's in mind ;).
And is this a great step : overclocking via a remote control :D.
Too bad I'll be forced to sit next to my rig anyway since from time to time, the DI container needs to be filled with dry ice while benching :DQuote:
Originally Posted by easypanic
take the batteries out when you don't need it?Quote:
Originally Posted by M.Beier
interesting to see the difference between QKHK and QHJJ
3300 from a QKHK is impressive! I cant wait to test... getting closer!
lol that is stupid to limit fsb in bios but allow more fsb from remote control since it comes with aopen.
mine,
> if anyone has isl6262 datasheets ,pleasse mail mertl.studio@msa.hinet.net
--
I don't have datasheet, but I hope that my modding for MSI's mb helps you.
Though my old post has already pictures,
http://www.xtremesystems.org/forums/...&postcount=485
But I re-post it here for your convinience.
<img src="http://222.151.185.113/c-board/file/945GT_SP_Vcore-mod.jpg">
I think that Pin#19 of ISL6262 is Feed-Back.
Good luck:)
kyosen, you should be geting Aopen board real soon?
You connect BSEL0, BSEL1 and BSEL2 to ground for 266 MHz, or BSEL0 and BSEL2 for 200 MHz. See my post here, your mobo corresponds both to the PD column and the CD column since it's a 975 chipset but uses slower CD CPU's. Since BSEL2 is already connected to ground when using a 166 MHz CPU you only have to bother about the other two pins.Quote:
Originally Posted by hicookie
Check out this datasheet for the CPU, BSEL configuration on page 25, and in table 5-1 on page 46 you'll find the actual pins on the second row.
Ask the Dothan people how you perform the mod, it's quite popular among laptop users. Here's a guide, since it's a PM they're using other pins for the mod but otherwise it should be the same.
The old corresponding mod for Athlon XP allowed higher clocks on nVidia mobos, I'd say it's worth a try. Just make sure you do it right.
Yeah, here in Akiba/Japan, it's expected thatQuote:
Originally Posted by zbogorgon
AOpen's & ASUS's Yonah motherboards will be available within 2days, finally!!!
I'll get both, and mod them asap if capable:)
Get one of those PCI cards that switches the power to the cooling, don't remember the name of them. Somebody help me.Quote:
Originally Posted by M.Beier
nice to hear ,im waiting a new update from my suplier :DQuote:
AOpen's & ASUS's Yonah motherboards will be available within 2days, finally!!!
same here in europe, our suppliers told us that mobos should show up tomorrow in their stocks :)
Yonah - OK
IHS on Yonah - OK
Cascades - Checked and OK
New evap mounting - Working on
Mobos - ??
:D
ok, got my laptop (T2400) and did a single test : PI
about 31", results later.
going to install the T2600 later on, after I played with it ;)
any working overclocktools maybe ?
very thanks! 大箸、Mats:banana:Quote:
Originally Posted by kyosen
hicookie - great work here :toast:
yes please :D, here in Europe, we really hope to se the board next week.Quote:
Originally Posted by kyosen
okay trying to find stock status at ingram micro now... ill update you when i get the email back.
Getting excited again.
Ooops, overlooked CAL930's modPI 8M result with his QHJJ T2600 ES:
modPI 1.5 XS 8M: 4m02.313s
CPU：T2600ES
Vcore：1.365V
Vdimm:2.45V
MB：MSI 945GT with kyosen's Vcore & Vdimm Mod
MEMORY：CORSAIR 5400C4 V5.2 CL3-2-2-4
FSB:218.3MHz(5:8)
COOLING:XP-90C + Delta x 2
OS:WinXPsp1
http://cal930.sakura.ne.jp/cgi-bin/c...600es_4_02.PNG
hicookie, I've just ordered a step8 :)
Thx for the advise, I'll write difference on my 2 CPU's once mobo's here.. :)
Gonna test it with Heatkiller rev.2.5 + 10 deg water (dont wanna insulate when changing CPU during test sesson)
- Afterwards I'll give the best a shot on a mach II, (tuesday or wedensday all this will happen)...
Wedensday / Thursday LN2 action will happen UNLESS my mem sucks, then I'll order a pair of G.Skill 2GBHZ (PC6400), they should do about the same as SuperTalent :)
M.Beier> my board has boot coldbug at-50c:rolleyes:
find some issues,945GT can set 3224,
aopen set it 3224 in bios,but cpuz shows 3228,
3224→3228
3225→3229:slapass:
my mainboards,:banana:
http://home.arcor.de/16vbogi/dothan/IMGP7301.JPG
Hmm, holy :banana::banana::banana::banana:...Quote:
Originally Posted by hicookie
That makes Mach II ultimate for cooling :S - BUT I WANT LN2 ACTION ::mad:
hope ECS wont have that issue...
Bogi>woa! u got two pics,and many..many...yonahs
ecs will delay 10/may....;)Quote:
Originally Posted by M.Beier
hmm to bad you cant try to get with a higher temprature into windows and then go sub -40 or so.. mayb the board has a terrible cold boot
@ bogi :D
Fire it up :D
:toast:
i have very much yonahs for tests, gg
http://home.arcor.de/16vbogi/dothan/...0start%203.jpg
omg, that's plain sick :D, and you're testing one? Cause I see an empty space!
wtf, now for AMD we have coldbugging cpu's and no-coldbugging mobos, while for Intel - vice versa? :slapass:Quote:
Originally Posted by hicookie
Well, we just need Hipro5 to fix some kind'a mod :PQuote:
Originally Posted by mrlobber
Quote:
Originally Posted by hicookie
Can you explain more? Board doesn't boot at all if temp is already below -50C? Can you power on with higher temps and then lower temps below -50C already in windows, does it still bug then?
i think it will be just on POST.Quote:
Originally Posted by kiwi
Quote:
Originally Posted by mrlobber
It is hte known ''cold boot'' problem.....
Sometimes it can be solved giving more Vcore at startup....
But moved by 120 deg C?Quote:
Originally Posted by GoriLLakoS
Well hope the higher vcore helps just like gorilla says. i still hate it. When running ln2 and get a bsod, you have to warm up everything :(
Hope its a post / vcore problem
Put the torch of the propane bottle in the pot...and start firring in the upper levels if you need to warm the mobo after the bsod in order to get warm faster...:D
eh, an update here for anyone in the USA...
Ingram micro still = no stock
*sigh*
They couldnt give me an ETA, it isnt even in their computer system yet.
:( :( :( Looks like to get it soon one will have to get it in another country.Quote:
Originally Posted by irev210
What's the logic behind the FSB jumpers on the Aopen 975 mobo? The manual shows settings for default (which I guess is 667 MHz even though it supports 533 MHz too) using both jumpers and 800 MHz with both jumpers removed. This doesn't really correspond to the BSEL pins since you only have to connect one pin to ground to go from 667 to 800 MHz.
There are 9 combinations and only 2 documented, maybe 266 MHz is available there too. If we knew the setting for 533 MHz it would be easier to figure out. Although I'd say it's safer to do a pin mod than making undocumented jumper connections.
This is warming up .
Lets see all those 2600 ES under ln2 :P
10s pi is the next quest :D
Finally...Watch Newegg this weekend:)
Good news Dumo Good news .Quote:
Originally Posted by Dumo
Waiting for the Yellow Box to kick some ass ;)
How certain are you? Many others have reported that Ingram Micro does not even have this in their system yet, so its looking grim for people trying to buy the board in the US.Quote:
Originally Posted by Dumo
AOpen gave me an April 10 date for Newegg about a week ago....but again I do not know how accurate that is. :(
It goes straight to NE.....Probly bypassed Ingrams and such for the 1st batch (10 to 20pcs. max).
oh maaaaaaaaaan cold bug....that's a dirty word :slapass:
coolaler's new record/
3420mhz pi 1m / 17.9s
3420mhz 32m/16"37'
cooler/coolexpress compressor
http://forum.coolaler.com/showthread...7&page=2&pp=40
good :D
now where my board ;@)
wow
W.R.?
impressiveQuote:
Originally Posted by dinos22
now we wait for the olympic answer by greeks
:clap: :clap: :clap: :clap: :clap:
yeah just looked up some list with a monster 15m run.....but something tells me that will go down VERY soon with meroms/conroes circling around
No, those 7300 Mhz Netbursts still have a gap of less than a second... only temporary, of course ;)Quote:
Originally Posted by dinos22
And a 3.4 Ghz Yonah gets similar Superpi 1M performance to 4 Ghz Dothan :slobber:
Hicookie, doing the 266fsb pinmod, we'd get the T2600 starting with 266x13 mhz?
What temps does he get with cooler/coolexpress compressor? Is that SS?
-48 cQuote:
Originally Posted by kiwi
ddr2 measurepoint
http://img19.imagevenue.com/loc79/th...r2_measure.jpg
what are we talking hereQuote:
Originally Posted by hicookie
evap? core? load? idle?
Quote:
Originally Posted by dinos22
idle...evap's temp
he didn't notice full load's temp...
coolQuote:
Originally Posted by hicookie
is he cold bugging past that or just being held back by motherboard here?
my single compressor unit is just a tad cooler so just about right for these heh.....i really don't like the sound of cold bugs with Intel mobos... i really hope there will be better builds to avoid that :)
ha-ha, if the motherboard can support -50C and lower, I smell 3600+ mhz on dry ice and a Mousepot :banana:Quote:
Originally Posted by hicookie
Just a little more than 3.6G and a tad colder will be perfect:toast:
Less load on evap. for sure:)
@hicookie...what happened with mod pics?