another bench from my gto² all stock.. voltage and cooling.
Aircooling xp90c + noiseblocker SE2 for cpu
http://img352.imageshack.us/img352/6...30001no.th.jpg
Printable View
another bench from my gto² all stock.. voltage and cooling.
Aircooling xp90c + noiseblocker SE2 for cpu
http://img352.imageshack.us/img352/6...30001no.th.jpg
ur score seems low a have 7.1k on 580core and 600mem check ur drivers ;)
I didn't put the XS timings, everything is STOCK
max on air info on the compare ;)
http://service.futuremark.com/compare?3dm05=1490933
The ambient temp seems to be LOW ;)Quote:
Originally Posted by principino1984
How about the room temp?
I have got it into water already, just a quick trial, a bit closer to 8k :D
7928marks on 3D05, the rams are in 166MHz divider
http://img18.imagevenue.com/loc167/th_c64_3D05_7928.JPG
I am thinking of V-modding the card too :D
TerveQuote:
Originally Posted by daysleeper
From where you buy your GTO2 in finland ??
kosmo
Turku
nice score an clocks Tin Tin :slobber:
go for the 8k m8 , il be there soon 650mhz mem :D now 2.47vdd
evilrulez-
you're on 5.11 catalysts?
hi guys is true the later connect3d gtos not being able to unlock pipes???
Mine maxed-out at 651/633 because of not enough voltage ;)Quote:
Originally Posted by blind_ripper
7957marks, still have 43marks to 8k :mad:
http://www.techpowerup.com/articles/...gpu_pencil.jpg
http://www.techpowerup.com/articles/...vdd_pencil.jpg
http://www.techpowerup.com/articles/...ddq_pencil.jpg
No 2B pencil to do pencil trick :mad: :D
seek a pencil and mod the f***ing thing ;)
i need wc real hard now and i run on windows without sp2 :mad:
stil on air last run , im gone stop now
http://service.futuremark.com/compare?3dm05=1499514
now sp2 for windows :(
volts are on the compare , if any say 1.75VGPu is to much for air there wrong :cool:
This card is confusing. Ever since I formatted my idle temp has gone up 7c. I never messed with my heatsink or anything. WEIRD
Hello Everyone :D
Just got a sapphire x800gto runs 570/570 on stock cooler/volts and has the 480 core :toast: (580 core it locked up) (still not tried over 570 mem) BTW its 2.0ns
Now i flashed it 5 times 5 diff bios it says successful everytime but still only 12 pipes :slap:
Am i just going to have to live with 570core/570mem on stock everything :confused:
Another thing this asus an8 sli motherboard does it have hidden settings in bios ? like ctrl & f1 :confused:
Thx Everbody :toast:
i`ve got same clocks on default volt with same card, but i`ve got 1,6ns memory, which supposed to be pretty rare on sapphire x800gto.Quote:
Originally Posted by stestan
I also did my new personal 3dmark01 record:
winchester 3000+@2731mhz
hynix d43 2x256mb @273mhz
sapphire x800gto 650/567
3DMark01 Score: 28562
http://service.futuremark.com/compare?2k1=8809449
stil air http://service.futuremark.com/compare?3dm05=1505889 , if u go higher than 1.8vGpu the ovp wil kick in i have checkt it ant on 1.79VGPU the card gets to hot to bench :( so now im gonne see for wc blok DD maze 4 ;) .
stil no windows xp pro withe SP2 so score lower :(
idle temps cpu and GPu @ 1.75VGPU http://i3.photobucket.com/albums/y90...tempsbench.jpg
I just finished testing of nearly 50 Connect3D X800GTO cards, and I have some bad news to tell.
None of the cards could be unlocked.
Every single card has a lasercut and permanently disabled pipelines.
It made no difference to connect the cutted trace and flash the bios.
ERA of the GTO cards is over :(
You're serious? Are you sure you even used the correct bios and whatnot? I can hardly believe NONE of them unlocked if you did it correctly. But if it's true, sad day :(
Anyone know which cards are still a good bet to be unlocked? Looking for a VIVO card.
Twelve of the cards had the second quad of pipelines disabled/broken.Quote:
Originally Posted by DamienKC
ATITool displayed 0xEFF3BFFF value as DIE_FUSES.
http://www.akiba-pc.com/3BFFF.PNG
Thirteen of the cards had the third quad of pipelines disabled/broken.
ATITool displayed 0xEFF3DFFF value as DIE_FUSES.
http://www.akiba-pc.com/3DFFF.PNG
Seven of the cards had the fourth quad of pipelines disabled/broken.
ATITool displayed 0xEFF3EFFF value as DIE_FUSES.
http://www.akiba-pc.com/3EFFF.PNG
Sixteen of the cards had the first quad of pipelines disabled/broken.
ATITool displayed 0xEFF37FFF value as DIE_FUSES.
http://www.akiba-pc.com/37FFF.PNG
Connecting the lasercut doesn´t have any effect to unlocking the pipelines.
ATITool shows 0xFFFFF71F value as Substrate_Fuses (instead of 0xFFFFF71E) when the lasercut is reconnected.
http://www.akiba-pc.com/3BFFF-71F.PNG
As you can see ATITool reports 0x660 as ROM_FUSES in above picture, so all of the pipelines are enabled by the bios. The other pictures show value of 0x861 which tells that only 12 pipelines are enabled by the bios.
ATI has probably disabled the pipelines internally from the chip. With the current knowledge there isn´t a way to activate the additional pipelines if ATITool reports anything else as DIE_Fuses than 0xXXXXFXXX (X = varchar).
To check if your card has a lasercut or not, start ATITool, press swift, and click settings (only ATITool versions 0.25 Beta 8 and newer support this feature)
If ATITool reports as Substrate_Fuses:
0xFFFFFXXE = Your card has a lasercut
0xFFFFFXXF = Your card has no lasercut
(X= varchar)
I have an unrelated, related questions
1. Are all Connect3Ds r423 ?
2. Are all Connect3Ds 2.0ns?
3. I forgot #3.... hmm... oh well...
I have a C3d gto r423 (noname core) 2.0ns 16 pipes 580/580 on water, but im just curious :p:
Mine connect 3D GTO @ 16pQuote:
Originally Posted by blind_ripper
http://service.futuremark.com/compare?3dm05=1496230
Does any one have information about Sapphire X800GTO Fireblade - is this card unlockable.
Is it possible to unlock extra 4 pipes with flashing -my Fireblade
10x in advance
Quote:
Originally Posted by milen_bg
unfortunatly No................
LOL i started this thread and drulled over c3d and gto2 forever, since i couldnt get them in my country. Now when finaly got ahold of them i found out they cant be modded anymore.........i have them comming from distributer in hungary that got them in stock last monday they must be the same batch as those 50 unlockable :( :( :( just my luck
The Sapphire GTO2 should be unlockable, so far i have not heardQuote:
Originally Posted by Millyons
of one that can't be unlocked.
I'm also interested if those 50 were all C3D r423 and/or 2ns parts...
ye, sadly, they are. :(Quote:
Originally Posted by Heretic
which bios is best for sapphire gto2?
i use stock 16p, but it clocks not so good, i cant get stable >600, and it's not loopstable in 01mark, get freezed after 3-4 hours
use TIN TIN bios its little bit beter i think http://simon.webideal.ca/X800GTO2/TinTin.bin
or this bios
http://simon.webideal.ca/X800GTO2/sx850pe.bin
it seems thate a X800GTO² can handel more VGPU thane a X850
http://i3.photobucket.com/albums/y90...ipper/vGPU.jpg
1.838VGPU:fact:
max VGPU without ovp , it gone come on water aimin 700mhz core ;) .
so far on air 1.79VGPU have 657mhz core 3D stabel and 645mhz withe memtweak :D .
happy banching
Is water in roomtemperature or colder?.That's quite high voltage :slobber:Quote:
Originally Posted by blind_ripper
watertemps dont know the room temps where round 10°c Ã:banana: 7°c .
thx next week or so il heb DD maze4 and the card wil go on chiller later on ;)
Quote:
Originally Posted by Millyons
Are you sure?
http://www.xtremesystems.org/forums/...&postcount=541
Try it with that, eh?:fact:
im almost sure, seems that all newer cards are unlockable, LOL man u got my hopes up, but if the Fs don't match there is no help, LOL im trying to tell myself that when they get here they wont be able to mod (witch they 99% wont be) so im not so disapointed, there is still a flicker of hope in me that i got to suppres withnin next couple days LOL, i guess ill just got to spend more money and get a 7800GT
My gto² under watercooling... I m going to test it with more vgpu ,
vdd mod and cold water ..
But for this test :
VGPU 1.7v
VDD Stock
Watercooling water ~ 22° GPU + CPU
http://users.skynet.be/pt1t/x800/8029.PNG
http://service.futuremark.com/compare?3dm05=1526326
nice score pt1t check my score a kopple of post back , whates ur name on tn ? il get u in a week or so ;)
does anyone know how to change the vivo on the c3d to pal from ntsc?
How much volts did You put on gpu with zalman vf700cu ??:)
1.79vgpu withe zalman vf700alcu
:D
1.79vgpu withe zalman vf700alcu :O
with the Open windows cooling IMO :)
There should be a DIP switch near the fan connector.Quote:
Originally Posted by aaron_sue
I've read the instructions for vmodding X850 cards. I only want to perform a vgpu mod to roughly 1.4-1.5v depending on the overclock. I'm currently sitting at 594/621 but want to run at least 610 on the core. Does anyone have a completed picture of how a modded vgpu X800GTO² looks like? I understand your image won't be 1.4-1.5v....but I just want to see a picture before proceeding with the mod.
http://users.skynet.be/pt1t//x800/gto2sl2_001.jpgQuote:
Originally Posted by Pt1t
My card :p
well just like i thaught got my 2 connect3d cards today and they are both unlockable :(
You used flashrom16p? The standard flashrom app won't do it.Quote:
Originally Posted by Millyons
It's a major bummer if the new cards are unlockable :(
This is on Nintek in Australia:
http://www.nintek.com.au/x/scripts/p...idproduct=4326
Any of you had these before?
(Powercolor X800GTO 16 Pipes)
Hi,
First goal here was to reach the 7000 marks without the need of overclocking the cpu and the ram:
http://img205.imageshack.us/img205/7...gsxs5gv.th.png
pencil vmod for vdd = 2.37v and vddq = 2.24v (ma ram is weak 515 at stock) + mem timing tweak.
I got the VF700cu on.
I will play with the cpu and ram later.
did anyone ever play around to figure out how many core mhz make up for 4 pipelines on 12p cards?
aren't the newer batches of C3D's all locked now?
seems so
i have 1.6v running through mine right now on the stock cooler. 615/645 benchable 610/630 for gaming. im also using the tighter mem tweaks found in this forum. im not maxed out yet wither its the heat.
Quote:
Originally Posted by KingYubbo
$300usd?
what sit in usd?
get a x1800xl for 320
It's AU$309 so thats what.... $240ish US?
for $240, get a 7800Quote:
Originally Posted by KingYubbo
http://www.hardforum.com/showthread.php?t=983396
that doesn't say $240 :S Plus this is in Australia. We all know things in the US are far cheaper.
WR Non WHQL - Not FM Approved, done with new Catalyst 5.12 beta, god bless you single cores ;)
http://ebola.club.fr/165gto2.jpg
http://service.futuremark.com/compare?3dm05=1542177
nice clocks on gfx , whate cooling are u using ;) .
here is my 01 compare withe 5.12 drivers , cpu on wc and gpu on air :D
http://service.futuremark.com/compare?2k1=8821116
i have 7872mark in 05 cpu @ 2.89ghz gpu @ 618mhz core/ 645mhz mem ;)
edit: add 03
http://service.futuremark.com/compare?2k3=4462716
well done :toast:Quote:
Originally Posted by Ebola
can you post the voltages you used? :)
Thx guys, cooling used is a waterchiller -> see my sig for pics, dual 1A-SL2 on both Toledo and R480
Liquid t° set to -15°C, no cold bug on Toledo reported
VGPU = 1.75V t° idle=-10°C full=-1°C
VDDR = 2.25V fan blowing on home made heatsink
VDDQ = stock, have to do it, eared that it improves somewhat
if cpu dos not hafe a cold bug yet why are the clocks so low 2.84ghz on chiller is nog so good :stick: , try to get them higher and ul see the power of the dual-core drivers;)
Don't give up its only 46pts to 8k :D
Just open all windows and..... do Your job :D
il do my best to night ;)
As i have left to remove IHS of the 165 and bench a 146, i did this tests without any isolation, i'll bench with the chill at max asap, but don't worry the 165 has some kind of margin ;)Quote:
Originally Posted by blind_ripper
http://ebola.club.fr/cpu-3106.jpg
next week my mach2 full modded 0% load -70°c is here, now i can bench the x2 here up to 2.9ghz on wc :) .
hafe a opty 146 to from a m8 thate dos 3ghz @ 1.55vcore on air ,
btw big diffrens between air wc :cool: il go to 700mhz i hope withe wc or els il go and get the chiller or the pashe change :banana: .
hope u will keep me compution :toast:
I've just done some vmodds om my c3dgto.
If i raise vdd, it doesn't help for my mem clocks.
But if i raise vddq i get much better mem clocks.
Atm im using vf700 stock ram coolers so i can't give them as much power as i want to.
But anyways @ 2.16v vddq i can bench @ 630mhz at mem without any graphic bugs 3dmark05-03-01 <,<
But i use 590mhz as my 24/7 setting.
My point is what function has vdd? I doesn't help my mem clocks but if raise just a bit i can go higher on core without any blackscreens.
Stock: 570/560 was max 24/7
With vddq 2.16v it became 570/590
And when i increased the vdd(Just a little bit ~0.05v) i got 10mhz on core.
So right now its running 580/590 24/7
Im going for vgpu as soon as i get my new cooler.
vdd is supposed to help both core and mem i think
WR 3dmark 2001 with gto² in watercooling
Water ~10°
VGPU 1.7v
VDDR STOCK !
Catalyst 5.10
Windows xp sp2
http://users.skynet.be/pt1t/x800/36376.PNG
nice pt1t .
this week my wc blok comes here
i thinke thate the VDDQ whase to get stebel clocks , and VDD for the mem.
btw whates the max u think u can go withe them ?
now @ VDDQ 2.32v VDD 2.47v mem max stabel to bench i think is 651 withe mem tweak :D
Quote:
Originally Posted by blind_ripper
a stock voltage , for , i have 637mhz max for 3k5 and 625max for 2k1
I m going to mod it this we , to bench @ 655/650 and cpu @ 3.25mhz with
ice in my watercooling :p
start of withe VDD mod and see thane VDDQ , so we can see whate mods whate ;) . nice clocks on the core btw , my 01 http://service.futuremark.com/compare?2k1=8821116 for single core use the 4.12 driver and dual-core the new 5.12 and w2k sp4 + dx8 and some tweaks , btw this run was fast run :D .
mem is 05 and 01 stabel @ 651mhz withe the memtweak :D
OK so I haven't done alot of reading. IS IT AT ALL POSSIBLE to run 2 C3D X800gto's in Xfire? At all?
No!
im gone test my sapphire GTO² withe a sapphire xtpe bios in cf , and gone buy me a mastercard from his :D .
normal withe a mastercard and a x850card u can run crossfire but no go withe 2 x800GTO or GTO² ;) , btw GTO² from sapphire are not made any more :(
http://www.xbitlabs.com/news/video/d...209221245.html
ya they are :)
wih an old stupid xp......
http://img208.imageshack.us/img208/7334/01se2uf.jpg
Quote:
Originally Posted by eviLRuLeZ
Your wallpaper is great:)) Can you send it to my e-mail ?
cemoy1@gmail.com
thanx
What cooling is that with?Quote:
Originally Posted by Mr.President
CPU is watercooled, grapic AIR
I'm joining the 8k '05 club x800gto2 :toast: :toast: :toast:
A64 4000+ boxed cooled 1,47v
x800Gto2 16 pipes watercooled vgpu mod (1,6v vgpu)
2x512mb Bh-6 2-2-2-5
8010 3dmarks05
http://service.futuremark.com/compare?3dm05=1571274
nice clocks el snorro ;) .
hope to join u there :p:
are the new ones locked or not?
if not im gonna buy one soon
still testing on watercooling
http://service.futuremark.com/compare?3dm05=1588842
so thats it for now it a new WR in the classe of x850serie , dos some wanne know how to get rit of the coldbug in the ati bios ? .
temps are like 19°c idle and 24°c load .
bud i cant run 05 higher for now i think i need a good vmod not the crappy pencil mod on the card .
no artifact during the run ;)
http://service.futuremark.com/compare?3dm05=1589466
Just finished the mods of GTO² T.S.A Edition (prototype).
This card is supposed to be used by customers, so I made the mods little different this time.
I didn´t use a resistor for GPU mods, but I used VIDs instead. The voltage can be adjusted via jumpers so the customers do not necessarily need a multimeter. They just have to install the jumpers correctly and they will know exactly how much voltage is fed to gpu. The gpu voltage can be adjusted between 0.00V - 2.00V, but the warranty is voided if 1.65V exceeded ;)
Since VDD & VDDQ voltage cannot be changed by VIDs I used variable resistors with safety features. The voltage can be adjusted up to 2.35V. There is another variable resistor added in cirquit (one for VDD & VDDQ) to make sure that the resistance doesn´t drop below certain point (that corresponds 2.35V).
I used some Microcool and Coolermaster heatsink for the power regulation components.
As usual, I attached them with Arctic Silver Adhesive.
For the gpu I added custom made 600g pure copper heatsink.
It can keep the gpu temperature under 50c in full load and 700MHz clocks.
I had to run some 3DMark05 with the last version of the "prototype" card.
The card is pretty much an average overclocker, but it is still doing pretty nice with quite weak fan. I selected 1.60V for the gpu, and 2.2V for the memory (VDD & VDDQ).
The memory will be doing much higher, once I install the heatsinks.
Sapphire X800GTO² T.S.A Edition: GPU 705MHz (1.60V), Memory 651MHz (2.2V).
Intel Pentium 4 670: 4505MHz (18x250) 1.38V
Asus P5WD2 Premium
Corsair 5400UL 1GB Kit: 375MHz 3-2-2-4-2 / 2.2V
http://service.futuremark.com/compare?3dm05=1594260
http://www.elektroni.fi/Stilt/TSA8137.jpg
http://www.elektroni.fi/Stilt/TSAGTO.jpg
http://www.elektroni.fi/Stilt/TSAGTOFET.jpg
http://www.elektroni.fi/Stilt/TSAGTOVDD.jpg
http://www.elektroni.fi/Stilt/TSAGTOVID.jpg
http://www.elektroni.fi/Stilt/TSASTICKER.jpg
Stilt that is by no means an Average overclocker. That is the best Gto2 i have seen to date..
According my binning experience with few hundred cards, it is ;)Quote:
Originally Posted by MaxxxRacer
quite frankly there have been ALOT of cars on XS and not many have hit 700, even with good cooling and voltmods.
with your binning experience, did you vmod all of the cards and see if they would clock to 700, or did you just clock them on stock cooling? I ask because if you did the latter of the two, then that isnt the best of judge of where the card will max out.
in any case what in the world were u doing with 100's of X800GTO2's?
I tested them with stock cooling and voltages in high temperature enviroment.Quote:
Originally Posted by MaxxxRacer
I tested the cards with ATITool max gpu & memory frequency scanning.
I picked up the best cards (40pcs), and only few of this amount will get some further processing...
The best cards did 610MHz - 630MHz gpu and 600MHz - 635MHz memory with stock cooling. Because I didn´t want to use the best cards for testing (prototype), I picked up an average card that did 590Mhz gpu and 613MHz memory at stock.
These mods that I use, will make almost any card run like hell ;)
thats a real sweet card you got there stilt.
been playing with my gto2 some more today as been experiencing problems with stability in some games.
i put the vdd up to 2.3 a while back, and didnt think much of it, but ive gradually been haing to lower my mem clocks over the weeks as games kept crashing.
ran atitool artifact scan and the mem wasnt even stable @ 605, so i thought i might aswell lower the vdd as it probably dosent need as much at lower clocks, so i put it back to 2.2 and artifact scanned and it went straight up to 630, and has kind of settled @ 625 artifact free, the ram is heatsinked and has a 120mm fan blowing across it, rather strange i thought
I want those mods :O
I want this board, if only this GPU could taste 1.8V @ -30, 9000 @ 3dm05 :D
Are these still all unlocking? I'm thinking of getting either a GTO2 or a X1600XT, if these are still modable this might be the better option.
I think NO GTO2 more coz X850XT drops the price to that level ;)Quote:
Originally Posted by C Stat B
In my country, X850XT = HK$1890 ~ US$242, GTO2 = HK$1790 ~ US$229 :D
So which BIOS turned out to be the best? I'm still using the techpowerup one and get ~7200 in 3D Mark 05 @ 640/615 MHz on stock cooling....
Tweak the ram timings, get some boost :DQuote:
Originally Posted by K.I.T.T.
http://www.xtremesystems.org/forums/...ad.php?t=55485