^^^
I have a similiar running Sandy... Does SuperPi1m at 1.44 - 1.45 vcore at 2803mhz (166 divider u.u) SuperPi times arent great, but the CPU has more potiential I think, the PO did 2750mhz on a BT with the slow fan, IHS removed btw. :)
Printable View
^^^
I have a similiar running Sandy... Does SuperPi1m at 1.44 - 1.45 vcore at 2803mhz (166 divider u.u) SuperPi times arent great, but the CPU has more potiential I think, the PO did 2750mhz on a BT with the slow fan, IHS removed btw. :)
Anyone out there have or seen any CABGE 0526FPAWs?? My brother just got one the other day, and just curious if anyone has seen any good results with this or similar stepping, thanks.
well i recieved my 4000+
DAA5BN KABYE-0538-GPMW... SH-E4
@ 2.933
1.56v
41c load
pi 28.797
voltage limited ....it wants some more volts, but im limited with the motherboard to 1.45+9.9% shows 1.55-57 in core cell and cpuz.
i believe this will do 2.95 with a little burning in.
Flash
VoodooProphetII
- Where'd you get that background from?
I wanna see the whole thing without the overclocking info screens spoiling the view.
Since this is the San Diego thread maybe someone has any information about this stepping:
KAB3E 0548BPMW
A search turned up nothing so therefore I ask... Any input appreciated. :)
http://www.forumdeluxx.de/forum/show...34&postcount=1Quote:
Originally Posted by koSmiQ
http://img.techpowerup.org/060111/3gig842.jpg
http://img.techpowerup.org/060111/cpu-clean569.jpg
not really optimized ... i think it will run 300x10 - 1,48-1,49
i just received my SD 3700+ (KAB2E 0549 EPAW). I read alot succesful SD OC stories, but i'm a little bit dissapointed in mine. I can't get it Prime stable @ 10x300 @ 1.7v. This is on WC. Load temps go in the 50s, so the chip runs rather hot. Also, i have massive problems with the 10x and 11x multiplier (BSODs, program crashes etc.). Alot of users have multiplier and divider problems. Is there a way around this?
3700+ San Diego, 1.54V 2860mhz @ Boxed
2*512 BH5-UTT
DFI Ultra-D
26min 38sek
http://img206.imageshack.us/img206/3...nter0048uz.gif
with no tweaks or realtime-priority.
OR
With some tweaks & realtime-priority:
http://img415.imageshack.us/img415/4...nter0059nf.gif
Time is: 25min 49sek :)
Jolli :)
3700+ San Diego
KACAE 0547RPBW
http://img297.imageshack.us/img297/4360/32m29150ud.jpg
http://img69.imageshack.us/img69/7343/prime22zq.th.jpg
Does anyone have any info about
KAB3E 0546GPAW
Google doesn't return anything useful..
Any help would be appreciated :)
stepping?
How do you Germans get the best CPU? Well good show :toast:
And what is it? I'm guessing the old week 47 KAB3E? I have 2 week 47 Opterons and they're both stable past 2.9 Ghz on the stock cooler, so week 47 SD cores obviously own.
(DIRECTED AT THE PERSON BELOW ME, FORUMS ARE SCREWING UP POST ORDER)
3 Ghz mit 1,296 Vcore:
http://img77.imageshack.us/img77/282/3ghz6qf.th.jpg
3,1 GHz mit 1,376 Vcore:
http://img64.imageshack.us/img64/5361/17ll1.th.jpg
3,25 GHz mit 1,52 Vcore:
http://img54.imageshack.us/img54/2716/5330ak.th.jpg
Go for Germany ;) Watercooled, but wait for Stonka his CPU, we will se 3,35GHz on Water soon...
Anyone here tested this stepping under phase change?
KAB2E 0547DPHW
Does it coldbug?
I was wondering whats the max safe voltage to use on a 3700+ on air.
depends on what aircooler you got. Personaly I wouldn't go higher as 1.55V 24/7 on air.Quote:
Originally Posted by GOTFrog
I've got a XP-120 with a med CFM panaflow
Quote:
Originally Posted by elh4jj4j
which stepping do you have? wow !!!!
KAB3E 0547GPMW and it's mine now :banana:Quote:
Originally Posted by kosmonova
Hi guys,
Does ~50'C meet the criteria as a high load temp with the Big Typhoon and San Diego 3700+ @ stock voltages? Yeah, I thought so too.
I’ve tried re-mounting the heat sink three or four times, I’ve tried different types of thermal grease and BIOS, I’ve even slaughtered/modified my Sonata case for maximum airflow.
Other temps in my system under full load (Prime95 20 hours) is as follows:
Motherboard – 30/32’C
Case – 30/32’C
GPU – 48’C
Hard-drive – 28/30’C
The CPU’s idle temp is 28-30’C, but at the very instant it’s put under stress it skyrockets to 48-50’C… and well, that sucks!
Wanna try out its OC potential, considering it runs stable on stock voltages (Prime95 20 hours) @ 2,8 GHz.
Ideas? Anyone else suffering from these annoying temp-variations?
i just ordered myself a 3700 from newegg for my birthday, gonna test it out con my xp-90 and 92mm panaflow. What stepping has been coming out of newegg recently
I'm looking to upgrade my system to finally go S939. For right now, the SD's are priced very nicely for the best performance/price point. I will be overclocking this cpu. On Newegg, they are showing 2 SD's. The "older" Rev. E4 and a newer Rev. E6. Besides running on less voltage and runing cooler, does the Rev. E6 overclock better than the E4 ?
I have tried searching, but everyone here seems to have the Rev. E4. I will be using air cooling (TT-BT).
Thanks.
I'm getting tired of this crappy 3700+, only does 2950 @ 1.71v barely 1m stable.
Do you think any more volts would help me getting 3G?
And btw, there is no way a computershop can find out that I have overclocked my cpu right? If I kill it :--)
Quote:
Originally Posted by LenniZ
no they cant find out. i dont think more volts will help.better cooling is the way. try experiment. put deionized water in ice tray in freezer. empty water out of loop and add the ice. crush then fill system with crushed ice. this will give you an idea of how better cooling will clock it. i did it once with a cpu i couldnt get passed 2.9GHz @ 1.6V on normal water. with chilled i got 3GHz at 1.57V. all good fun, at least you get a good screenie before water heats up again. :p
What do you guys think of this stepping ? CCBWE 0541XPMW, i dont have mobo to test it out myself atm. Thx
^^^ Should be pretty good. :)
I have 3700+ Sandiego E6 ccbwe 0534 mpmw and i don't think that it's a good step. I get 230x11 1.40v and 240x11 1.46v.
Have you tried OC with mulitplie 9x and HTT set to 3x ?
No, I have msi k8n neo2 platinum and i think that it play with 1T until 275 fsb.
Which is the difference between SanDiego A64 3700+ & FX57? Except frequency of course.
[sorry for posting here]
Hi,Quote:
Originally Posted by Chozas
I got the same results more or less... :/
The maximum my SD is giving me is (stable): 11X242 @ 1.425 (2661Mhz)
I am quite disappointed...
As I am new, can someone tell me what is "E6 ccbwe 0534 mpmw" for example?
Some kind of serie number? How do you know its a good serie?
Thanks
Can somebody plz tell me a bit about the following chip:
Its a KAB2E 0546 GPBW 3700+ And does 2.9ghz @ stock volt.
Regards
Quote:
Originally Posted by x3ro
I found this person (french like me) who has this SD. On this link you can see a stable OC of it. He's on water cooling:
http://valid.x86-secret.com/show_oc?id=69512
btw, he's selling it.
You might want to ask him for more details:
http://forum.hardware.fr/hardwarefr/...t-253085-1.htm
Ask for "starostise"... not sure about his english level... :p
ps: voltage on his test is 1.32
oh, seems this person is also a member of Xtremesystems actually ;) (God I should be detective ;D )
Cheers, merci jelly:PQuote:
Originally Posted by Jelly
the max temp of sandy's is like 80 aint it?
I get 240x11 with 1.48v :slapass:Quote:
Originally Posted by Jelly
My FX-55 sandie and vapo LE, done 8m pi stable at 3GHz with 1.39~ vcore
hoping to get it down to 1.35 or less 8m or 32m pi stable - updates to come :cool:
http://www.host366.com/pics/oohyeah.JPG
Any tips or feedback most welcome :toast:
Alec
I had four KAB3E 0546 GPBW, and it sucksQuote:
Originally Posted by x3ro
prime stable @ 2700 1.55v and pi 32m stable @ 2800MHz 1.6v watercooled with ihs
max screen @ 3080MHz with 1.74v
Mine did 3010Mhz @ 1.50v.. will be doing further testing thoQuote:
Originally Posted by starostise
Regards
Hey,
my SD does 3151 on water...
Click
KAB2E is better for our stepping thenQuote:
Originally Posted by x3ro
Ramaistro thats a lot voltage on CPU :O What your temps are in load?
Load temps are around the 45... Just hoped some more volt helped but just little bit higher would make it not stable for pifast. Gives me the not convergent in SQR05 errror..
Does someone has any comment on the error?Quote:
Originally Posted by Ramaistro
hey, what do you guys think of my sandy 4000+ (KABYE 0538GPMW)?
Roflmao, why do you call all of us gay? :rolleyes: :DQuote:
Originally Posted by Hystrix^
Ontopic: see for yourself and let us know? :confused:
I think he ment GUY's instead of gay :P
Suicide shot under cascade... Not bad, but I was a little bit disappointed by the chip; actually this is an excellent FX57 stepping... :(
HTT won't go over 230 @-60°C :mad:
3705MHz@1.68V Cascade CPU@-61°C
http://www.beforeoverclock.com/images/cpu-3705.jpg
3700+ SD
KACAE 0602 GPMW
http://img204.imageshack.us/img204/5945/30005lr.jpg
Out of the box, cpu is like 10 mins old now. Running prime at the moment :cool:
God damn thats nice :)
http://valid.x86-secret.com/show_oc?id=85723
Prime stable for 2 hrs so far . . . Now it's time to buy some TCCD mem (10 x 300 1:1 = sweet :cool:)
Anyone knows how KAB2E 0548EPAW performs thru air cooling? :D
It should be good :) Test it out
hey all star is that 1.3 voltage true. I am at 2904 (12*242) My voltage is @ 1.6125 and I can not go much high in the fsb. I have oc'ed to 3000 but I can not go 5 minutes in prime no mater how high I set my voltage. I hope it works for u. I am so j.
I am at 1,408 vcore, 1,4 in bios, so mobo is overvolting a bit. What's your stepping?Quote:
Originally Posted by captses
I am new to oc'ing so you must bear with me. I am not sure what stepping is except that perhaps someone wants to scrap. My cpu has on it from top to bottom this:
AMD ATHLON 64
ADA4000DAA5BN
KACAE 0544EPAW
1353107 K50612
I hope that helps.
What cooling are ya?Quote:
Originally Posted by All_Star
How it goes with higher vcore?
It is a 0549MPMW
http://www.zwiebelweb.de/testing/sd3700.jpg
Cooling: Thermaltake Big TyphoonQuote:
Originally Posted by Spyrus
Haven't testes with higher vcore so far.
Quote:
Originally Posted by All_Star
very good. :toast: my 3700+ has the same stepping ( KACAE 0552 FPDW ) :)
first try: 273x11=3003@1.52V@boxed cooler.
unfortunately this stepping has a coldbug under my vapo ls :(
c u
ok, I'll ask. Is this a new one?
no , it's the same cpu :DQuote:
Originally Posted by coop
i wanted to try what it does with lower voltage :stick:
Temp is pretty high? :confused:Quote:
Originally Posted by starostise
ADA3700DAA5BN
KACAE 0602 GPMW
XXXXXXXX60241
3000mhz / 1,392 vcore
Screen:
http://img159.imageshack.us/img159/1829/30001394jo.jpg
that's true, i'm aircooled by freezer 64 pro with 22-23°C ambiant temp :)Quote:
Originally Posted by All_Star
What are your Ram running?Quote:
Originally Posted by All_Star
are you using a divider. if you are, wich??
2/3 divider = 200mhz :)Quote:
Originally Posted by mikael999
I did something very good before running StressCPU 1M @3306MHz... but what's the hell was it? I've failed to do it again @3316MHz and unfortunately lost 2 1/2 mins... :rolleyes:
http://www.beforeoverclock.com/image...CPU1M@3316.jpg
http://www.beforeoverclock.com/image...CPU1M@3306.jpg
Hey all
My first attempt at OC'ing my 3700, got it at 2.86GHz @1.5V prime stable, running an Asus A8R32-MVP deluxe. Started running into some stability and boot issues if I went much higher. Cooling with a Zalman CNPS9500 with the fan adjusted by my mainboard's Q-Fan, so if the temps get any higher than 47 C it'll kick the fan into high gear. O yes and arctic silver II - stupid me forgot to order AS5 when I bought the other stuff :slap: Ambient room temp is about 25 degrees C.
I don't know what is good since I'm fairly new to OC'ing. My 1st OC I did was a pentium 1 100MHz to 133MHz, oo goody :p:
high resolution pic
My memory apparently doesn't like higher speeds, had it up to 224 and it wouldn't take it :( timings 2.5-3-3-6
Besides the AS5, anything else I should mess with to try and squeeze more speed out? Like, would bumping the voltage up to 1.55 stabilize it? I'm just afraid if messing with voltages too much.
Cheers :toast:
very nice, but those rams you got there, they're amazing :banana: :banana: :banana:
Spi32M improved! :D
http://img192.imageshack.us/img192/2...32m21m54s0.jpg
@Hystrix^: These RAM modules are awesome; Spi1M @283MHz
http://www.beforeoverclock.com/image...26s%5b7%5d.jpg
Nice, but I've just heard that 1.5 Cas latancy is impossible for A64, dunno why.
My 4000+ clocks als quite good, but my rams sucks. So I've just ordered some very nice corsair sticks.
Chec signature for oc
Grtz
perhaps, some suggestions for my san diego divider problems?
http://www.xtremesystems.org/forums/...ad.php?t=97190
H.
here is my san diego , i can get it to 3ghz @ the max voltage my motherboard supports (1.45v) but it´s extremly unstable and i get a bsod in windows as soon as it finishes loading.
the below setting is my stable overclock, i can´t seem to get it higher and have it 100% stable.
any suggestions would be appreciated ?
http://img192.imageshack.us/img192/8...led11ic.th.jpg
@ Before
Try setting your Cas latency back to 2.0. You're not actually at 1.5, the DFI's just give you that setting for some reason, but by trying to run 1.5 you're actually running around 2.25, just a suggestion.
Finally i managed to get my 3700+ to 295x11=3250. :D
Unfortunately my CPU has got a coldbug, so i use the ricky-tweak and a second heatspreader between the evap of my Vapo LS and the CPU :D
But i still need a high vcore to get the temps at least to ~20°C for 300htt :stick:
with the boxed-cooler i'm able to get 2900mhz@1.39V Super PI 32M stable.
for 288x11=3171 i need 1.52V
for 295x11=3250 i alredy need 1.65V although the cpu could run with less Vcore stable, but the damn coldbug ... :(
Super Pi 32M
http://img45.imageshack.us/img45/732...165v8en.th.jpg
:toast:
hey anyone here knows anything about this stepping ?
kacae0544epaw
i've a KACAE0552FPDWQuote:
Originally Posted by generalkido28
This stepping has got a coldbug. I need ~+20°C for 300htt+. :stick:
My Results:
2900mhz @ 1.39V with boxed cooler
3271mhz @ 1.65V with Vapochill LS (super pi 32M stable)
3400mhz(11x309) @ 1.76V with Vapochill LS (Super pi 1M stable :D )
I was looking for a SanDiego cpu at newegg and came across these 3700+'s:
http://www.newegg.com/Product/Produc...82E16819103539
http://www.newegg.com/Product/Produc...82E16819103622
and this 4000+:
http://www.newegg.com/Product/Produc...82E16819103529
Do you think it's worth it to get the 4000+, or save $90 and get the 3700+ instead?
My SanDiego 3700+
ADA3700DAA5BN
KACAE 0602GPMW
1400929A60416
3000MHz@1.376V Prime
3120MHz@1.504V Prime
3160MHz@1.568V SuperPi 1M
3419MHz@1.664V CPU-Z
this 0602 SanDiego is so damn hot.... with more than 1.5V the cpu reach fast the 50°
I ordered my 3700+ last thur from newegg and it's a CCBWE 0551SPMW!:banana:
Still climbing the OC ladder, but so far I'm at 2.55ghz and still on stock volts.:toast:
Quote:
Originally Posted by Celcius
great decission to buy the 3700+ :toast:
the 3700+ are better overclockers than the 4000+ at least mine is. :D
with the 4000+ i got max 3120mhz and with the 3700+ i'm at 3271mhz so far ;)
keep on ocing :cool:
my older one:
ADA3700DAA5BN
KABYE 0542FPMW
1346777J50714
under water:
2960Mhz @ 1.584V Prime-stable
CPU-Z 3120MHz....
last week i tried it under a vapochill ls from a friend:
SuperPi: 3429MHz @ 1.75V
CPU-Z: 3438Mhz @ 1.75V - http://valid.x86-secret.com/show_oc?id=105473
i think with dry ice or ln2 are more mhz possible...
yeah the 3700+ seems to generally be a better OC chip, my friend has the 4000+ and he barely got a 200MHz increase before running into stability problems. Might be his board tho, he has the original Asus crossfire mobo which I don't think is the best for OC'ing.
I pulled my cooler yesterday to figure out what my stepping was - stupid me forgot to check when I first installed the chip :rolleyes: - and it is a KAB2E, anyone know anything about this stepping? I'm not a pro at these things by any means, I'm a n00b when it comes to stepping ;)
currently I have it at 260 x 11 @ 1.5v perfectly stable, but 261 x 11 is not :confused: I tried bumping up the voltage to 1.55v and it helped but I only got a few more MHz out of it and it wasn't worth the extra stress and heat IMO. Any ideas? I'd love to get it to 2.9GHz, preferably 3 but I don't think that is going to happen :(
My board is the Asus A8R32-MVP, ram is G.Skill 2 x 1GB PC3200, Here
CPU-Z validation of my current OC
Quote:
Originally Posted by SparkyJJO
here's some info about your stepping (KAB2E) ;)
http://www.xtremesystems.org/forums/...ighlight=kab2e
http://www.xtremesystems.org/forums/...ighlight=kab2e
http://www.xtremesystems.org/forums/...ighlight=kab2e
c u Turrican
my cpu with dryice: AMD64 SD3700+ 0602GPMW - 3667.31 MHz@1.84V
:banana:
3rd in the cpu-z 3700+ hall-of-fame...
http://octs.ripping.org/dryicesessio...3700_top10.jpg
Just happened to get a hold of an Alienware computer, which happened to have a San Diego 4000+. It's kinda interesting I guess, pretty old though... I don't know if i should sell it or not.
The stepping is as follows:
ADA4000DEP5AS
CAAZC 0441EPMW
I haven't seen any information about those yet...but any insight?
Heck, what to do.
I've still got a 3700+ SH-E4 stepping that runs at 2750Mhz 275x10 - to keep it 1:1 with my Corsair 4400. I've kept it around becuase - thanks to Conroe - AMD CPU's are AMAZINGLY affordable now. Sure, the AM2 is out, but that would mean a switch to DDR2. Then, i'd have to find a Dual Core that overclocked like a mutha, then I'd have to get the whole sha-bang put together.
It's like XBOX 360 vs PS3. It's my LAN box, it works RIGHT NOW, and i've got no waiting around for parts.
GAME ON!
I am curious why all guys running sp2004 only at priority 1 and small FFTs
to determine stability of system.
I think sp2004 will be run with priority 9 or 10 and Large FFTs at least four hours
wow, we have the same stepping, pretty much, when i saw you list the serial, i was like omgwtf?? and had to check my serial.. but check it outQuote:
Originally Posted by gianni-gt
ADA3700DAA5BN
KABYE 0542FPMW
1346777J50562
4000+ KAB1E 0626FPMW
3.6ghz 1.59v :toast:
looks like this is about as far as it likes ...more voltage no help.
http://img209.imageshack.us/img209/7...016vyp7.th.jpg
Any difference between the E4 and E6 revisions of the 3700+ SD? Do they overclock about the same?
wow.... what is the highest cpu-z validation?Quote:
Originally Posted by mouawad
Hey there,
cant get my 4000+ stable at 3.0 Ghz, not even at 2.9 Ghz with 1.65vCore. Its on water... Maybe even more vCore?
http://valid.x86-secret.com/cache/148096.png