AMD "Thuban" Core (Phenom II X6) XS Overclocking Charts

I can't see the 'filled with users with the same problem', however on this post there may be something useful :

"1055T works and OCs nicely on this board. I seem relatively solid at 3.7GHz right now undervolted.

The only thing to note is that you must underclock the ram to overclock the chip. I can't post above 800MHz DDR2 when the FSB is greater than 260MHz."

Have you thought that maybe the 1:2 Ram divider on this board is just crappy, or you just have to avoid the x7 and x8 NB multipliers as they are said in this thread to be crappy ?

Just try this:

OC your CPU by raising the CPU multi only and CPU-NB multi only....leave the HT at 200 range...

and reply here with the results of your testing

Multi has nothing to do w/ voltage,I can boot @ 300 ht on this board so the 260ht is wrong,his mem is just garbage.I believe it was 2.5ghz w/ a little over stock ht but I will try again for you.:up:

13x doesn't work with stock ht and core.

Who said that multi has anything to do with voltage? I say that the memory divider & CPU-NB multi combo may have a bug. To rule this out, i just proposed using only multipliers to see what the bug is.

I'm just curious as you to see what the problem is.

Can you post your complete bios settings to see everything (or maybe we should move this to a separate thread not to mess particle's thread with info like that) ? Or even a couple of screenshots ?

Who said that multi has anything to do with voltage? I say that the memory divider & CPU-NB multi combo may have a bug. To rule this out, i just proposed using only multipliers to see what the bug is.

I'm just curious as you to see what the problem is.

Can you post your complete bios settings to see everything (or maybe we should move this to a separate thread not to mess particle's thread with info like that) ? Or even a couple of screenshots ?

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: -----------
CPU Frequency: 4018 MHz
CPU vCore: 1.36V
CPU Multiplier: 16.5x
CPU Turbo: Disabled
CPU NB Speed: 2922 MHz
HT Ref Speed: 243 MHz
RAM Speed: DDR3-1333
RAM Timings: 8-8-8-20-2T
RAM Configuration: 8 GB (2 x 4 GB)
RAM vDIMM: 1.63V
Motherboard: ASUS CHIV formula
Chipset/Socket: AM3, 890FX + SB850
Cooling: Thermaltake Frio
Temps: 24C Idle / 52C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Untested

http://valid.canardpc.com/cache/banner/1854121.png

Going to do some tests now.

HT Ref Speed is 243~244 not 200, right ? (your log says 200)

Seems like a nice chip...if it proves to be stable at these settings

Ah yes I was in a hurry it was indeed 243. Memory is unstable at the moment i need to downclock it to make it run ( not suited for OC at all )

1333 8-8-8 should be stable on any ram at 1.63v. JEDEC spec is 1333 9-9-9 @ 1.5v, that means even the low end of low will be able to pull those speeds. If you are having "ram instability" at 1333 its not because of your overclock.

Yeap, Beep is right...focus on cpu and cpu-nb voltage and secondary your HT and NB voltages....ram is not an issue here obviously...


And if you re-mount , try to update the batch...:D

I'm trying different settings now I can run @4GHz with 1.356V not much less than before but it's 1 degree cooler!
http://valid.canardpc.com/cache/banner/1854221.png


Thanks Beep for the tip I'm focusing on the CPU right now. I'll try to get to the most stable OC first then I'll try some Extreme settings to see how far it will go. @ felix I'll be re-applying a new thermal paste soon since My Cooler is installed backwards ( always in a rush )

The Highest validated OC is

http://valid.canardpc.com/cache/banner/1854390.png

It crashed just trying the WEI.

the most stable i could get is @ 3.9GHz 1.356 it passed Prime95 1 hour Blend test.

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: -----------
CPU Frequency: 3807 MHz
CPU vCore: 100% load 1.349V
CPU Multiplier: 16.5x
CPU Turbo: Disabled
CPU NB Speed: 2769 MHz
HT Ref Speed: 230.8 MHz
RAM Speed: DDR3-1333
RAM Timings: 8-8-8-22-2T
RAM Configuration: 8 GB (2 x 4 GB)
RAM vDIMM: 1.62V
Motherboard: ASUS CHIV formula
Chipset/Socket: AM3, 890FX + SB850
Cooling: Thermaltake Frio
Temps: 34C Idle / 47C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable " Linx 8 hours "

http://img6.imageshack.us/img6/8611/unledjc.jpg

Quote:

---

Originally Posted by TheBreezyBB

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: -----------
CPU Frequency: 3807 MHz
CPU vCore: 100% load 1.349V
CPU Multiplier: 16.5x
CPU Turbo: Disabled
CPU NB Speed: 2769 MHz
HT Ref Speed: 230.8 MHz
RAM Speed: DDR3-1333
RAM Timings: 8-8-8-22-2T
RAM Configuration: 8 GB (2 x 4 GB)
RAM vDIMM: 1.62V
Motherboard: ASUS CHIV formula
Chipset/Socket: AM3, 890FX + SB850
Cooling: Thermaltake Frio
Temps: 34C Idle / 47C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable " Linx 8 hours "

http://img6.imageshack.us/img6/8611/unledjc.jpg

---

That's not stable... 772Mb of RAM tested? That's deffo not stable.

his ram timings seems very relaxed, i doubt that isnt stable

I'm pretty sure the RAM is very stable. It's underclocked, and i had no errors running Prime95 at these clocks.

Updated

I'm curious, why I'm not in the list?

http://www.xtremesystems.org/forums/...&postcount=796

Yours probably isn't the only entry I've missed. It's in there now.

772 MB is like runnning 32M...

I know thats 8 hours but IMC has a lot less stress than say 1500+

I'll do another stress test on 6144MB almost all available memory. I'll post when i'm done.

The best i could get so far http://valid.canardpc.com/cache/banner/1859915.png

I checked the CPU stepping today and here it is : CCBBE CB 1022BPMW

here's Prime 95 for over 9 hours

http://img856.imageshack.us/img856/1671/unled2ze.jpg

RAM and NB Clocks & Voltages for this ? 3.8G only 1.31V ...that's really good, i guess...

Here's a Screenshot

http://img571.imageshack.us/img571/8130/unled21e.jpg

Quote:

---

Originally Posted by BeepBeep2

1333 8-8-8 should be stable on any ram at 1.63v. JEDEC spec is 1333 9-9-9 @ 1.5v, that means even the low end of low will be able to pull those speeds. If you are having "ram instability" at 1333 its not because of your overclock.

---

My 2000Mhz DDR3 won't run anywere near 1333Mhz 8-8-8 no matter what Voltage or settings I use.

Most it will manage is 9-9-9 1600Mhz

My RAM is 2000Mhz 9-11-9-27-2T @ 1.65v

It wil not even post at 1200Mhz if I even attempt to try and drop the timings down to CL8

Quote:

---

Originally Posted by TheBreezyBB

Here's a Screenshot

http://img571.imageshack.us/img571/8130/unled21e.jpg

---

That NB clock is pathetic! Having a high NB is just as important as the CPU clock itself!

Quote:

---

Originally Posted by almighty15

That NB clock is pathetic! Having a high NB is just as important as the CPU clock itself!

---

true but 2:1 NB to ram ratio is about where it normally stops scaling performance.

Quote:

---

Originally Posted by almighty15

That NB clock is pathetic! Having a high NB is just as important as the CPU clock itself!

---

Well, i haven't gone there yet just doing some experiments that's all. Also, this is my first attempt at OC anything.

Quote:

---

Originally Posted by TheBreezyBB

Well, i haven't gone there yet just doing some experiments that's all. Also, this is my first attempt at OC anything.

---

Disregard the naysayer, you are doing well. Gains over 2600 NB at DDR2-like speeds (1200) are almost worthless anyway.

Quote:

---

Originally Posted by BeepBeep2

Disregard the naysayer, you are doing well. Gains over 2600 NB at DDR2-like speeds (1200) are almost worthless anyway.

---

That's what i noticed. I ran some benchmarks with NB@2990 Rams@ 1227, i didn't not notice any difference, maybe there was some Miniscule increase that i didn't notice.

Anyway I'm getting some Mushkin Red @ 2133Mhz soon that should be fun. More OC to come.

This is with ambient temp around 27-28c :mad:


CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: -----------
CPU Frequency: 4014 MHz
CPU vCore: 100% load 1.43V
CPU Multiplier: 20x
CPU Turbo: Disabled
CPU NB Speed: 2600 MHz
HT Ref Speed: 200 MHz
RAM Speed: DDR3-1333
RAM Timings: 7-7-7-20-1T
RAM Configuration: 8 GB (2 x 4 GB)
RAM vDIMM: 1.5V
Motherboard: ASUS CHIV formula
Chipset/Socket: AM3, 890FX + SB850
Cooling: Thermaltake Frio
Temps: 35C Idle / 54C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable " Prime95 "

http://img189.imageshack.us/img189/7098/22900813.jpg

http://valid.canardpc.com/cache/banner/1890213.png

Much better :up: You are getting the hang of this rather quickly.

Thanks :) I'm working on less V stable 4GHz. I'm also getting some new rams Musking Redline @2133Mhz very soon. that should give me more things to play with!

I got better V now 1.376V Idle & 1.402@ 100% load

Tested for 10+ hours and not a single error.

http://valid.canardpc.com/cache/banner/1890991.png

http://img3.imageshack.us/img3/3668/lessv.jpg

Try to run 1000% memtest w/98%mem usage to see if nb is stable,I know you only have 2 sticks but 1.4 sounds low even w/ high nb volts you need decent cpu volts.

Quote:

---

Originally Posted by Hell Hound

Try to run 1000% memtest w/98%mem usage to see if nb is stable,I know you only have 2 sticks but 1.4 sounds low even w/ high nb volts you need decent cpu volts.

---

Why (the heck) would he need to test a 2600 Mhz NB clock? Thats like given stable at 1.2v on a lot of chips.

If he got through 10 hours of blend, the CPUNB is fine.

Whenever my NB was unstable my systme would freeze and there's no BSOD or nothing at all. and that only happens when i try Prime95 for less than an hour.

I would not sale/use a overclocked system unless every thing has been tested for 24/7 stability.Some software could stress it and bam reset or freeze.Why because nothing is guaranteed.

So, a full week of testing for stability?

Quote:

---

Originally Posted by TheBreezyBB

So, a full week of testing for stability?

---

Best response ever XD

Quote:

---

Originally Posted by Hell Hound

I would not sale/use a overclocked system unless every thing has been tested for 24/7 stability.Some software could stress it and bam reset or freeze.Why because nothing is guaranteed.

---

Again, I dont know how many times to say this, if P95 Blend passes more than 6 hours, the IMC/memory subsystem are stable.

Quote:

---

Originally Posted by BeepBeep2

if P95 Blend passes more than 6 hours, the IMC/memory subsystem are stable.

---

that's both true and false at the same time. depends greatly on the motherboard, LLC makes stability testing a nightmare as I've find myself having to overshooting where I need be at by around 5-10% just to keep idle LLC above the stability line.

you can pass prime95 blend for hours, days, even WEEKS but the minute you stop testing and LLC goes from load to idle, a bsod or freeze can occur :rolleyes: to make matters worst there aren't many tools around to testing the idle state of LLC

Quote:

---

Originally Posted by Hell Hound

I would not sale/use a overclocked system unless every thing has been tested for 24/7 stability.Some software could stress it and bam reset or freeze.Why because nothing is guaranteed.

---

So why overclock at all then?

You're talking about testing an overclock for 24Hrs with EVERY available bit of stress testing software there is, Which would take WEEKS!

And how would you know if you've failed because of voltage or heat?

I personally run an hour of P95 with custom settings then 50 runs of Intel Burn Test and if it passes then it's stable.

Some people need to stop with all this 24Hr stress testing bulls**t and actually learn to enjoy using there machine what it was built for and not wait around for days testing it for instability issues that they'll other wise never see using it normally.

Most use their systems for 2-3 yrs so a week of testing is moot.
A crash is not tolerable gaming or working.
Ever heard of quality,well it don't come from nowhere.
Someone it testing to make sure it works @ advertised spec.:yepp:

Quote:

---

Originally Posted by Hell Hound

Most use their systems for 2-3 yrs so a week of testing is moot.
A crash is not tolerable gaming or working.
Ever heard of quality,well it don't come from nowhere.
Someone it testing to make sure it works @ advertised spec.:yepp:

---

A system that can pass a couple hours of prime on blend or Intel burn test won't crash on a game or while working.

Quote:

---

Originally Posted by Hell Hound

Most use their systems for 2-3 yrs so a week of testing is moot.
A crash is not tolerable gaming or working.
Ever heard of quality,well it don't come from nowhere.
Someone it testing to make sure it works @ advertised spec.:yepp:

---

U said most, Well, i guess i don't fit in this Equation! I tend to change systems every 6-12 months. But, that doesn't matter really cause in all my life owning PCs i never reached a 100% CPU load or 100% memory load!!
So i guess your point is moot.:clap:

Is there a way to download the stable chart in a spreadsheet or at least CSV or something that is more readable? That PNG is very hard to read.

Can you guarantee that your clients will never reach 100% load.;)

Can you guarantee that your Electronic equipment will work as they are meant to? :welcome:

Quote:

---

Originally Posted by sebaz

Is there a way to download the stable chart in a spreadsheet or at least CSV or something that is more readable? That PNG is very hard to read.

---

It looks like they added a maximum posted image width when they upgraded the forum software. Copy the URL of one of the images and open that in a new tab by itself. You'll find a very easy to read chart, and that's exactly what it looked like prior to the upgrade.

Quote:

---

Originally Posted by TheBreezyBB

Can you guarantee that your Electronic equipment will work as they are meant to? :welcome:

---

I do a stability test @ stock,if anything fails it gets RMA'D.
Make sure it works before you break it.:yepp:

Quote:

---

Originally Posted by Hell Hound

I do a stability test @ stock,if anything fails it gets RMA'D.
Make sure it works before you break it.:yepp:

---

Looks like you're having fun doing that. Enjoy!

We here at Xtremesystems, Like to keep it extreme :D that's why i joined here in the first place.

CPU Model: AMD Phenom II X6 1100T BE
CPU Stepping: CCBBE CB 1045GPMW
CPU Frequency: 4107MHz
CPU vCore: 1.46V
CPU Multiplier: 18.5x
CPU Turbo: Disabled
CPU NB Speed: 2664 MHz
HT Ref Speed: 222 MHz
RAM Speed: DDR2-1184
RAM Timings: 5-5-5-15-2T
RAM Configuration: 2 GB (2 x 1 GB)
RAM vDIMM: 2.16V
Motherboard: Gigabyte GA-MA790X-UD4P
Chipset/Socket: AM2+, 790X + SB750
Cooling: Air (Zalman CNPS10X Performa & 7V Delta FFB1212EH)
Temps: 27C Idle / 50C Load
Operating System: Windows XP Home SP3
32/64-Bit: 32
Stable/Suicide/Untested: 8hr Prime95

Quote:

---

Originally Posted by TheBreezyBB

Looks like you're having fun doing that. Enjoy!

We here at Xtremesystems, Like to keep it extreme :D that's why i joined here in the first place.

---

You can keep your ricer that blows up before it gets to the end of the block and,
Be Breezy :rocker:

Quote:

---

Originally Posted by Hell Hound

You can keep your ricer that blows up before it gets to the end of the block and,
Be Breezy :rocker:

---

have fun with your clunker.

Clunkers are cars that don't work so,you can't win the race unless you make it to the finish line.

Quote:

---

Originally Posted by Hell Hound

Clunkers are cars that don't work so,you can't win the race unless you make it to the finish line.

---

Sorry, I wasn't meaning to make a racing analogy...I meant junk. "Stuff."

Some of us like to push limits, you like to push absolute stability. Have fun with that.

Testing 24 hours with P95 at max mem is essentially the same as 24 hours of LinX at max memory which is essentially the same as 1000% HCI memtest which is essentially the same as a month of Memtest86. Nobody cares, at least I dont care that you like to excessively stability test. Intstead of running all of those, I suggest you just run one for five days. I test based on what I know I will do with my rig. PCs that go to customers get 18 hours of Prime95 blend, 2 hours LinX and 32M. Unless they will be running WCG, which the probability is less than 1/10000 I dont think they will hold a 100% load for more than the hour they ever encode video with Windows Movie Maker.

Being able to use performance gained is so much sweeter,5ghz 24/7 or 7ghz for 10sec.
Don't down talk stability because you know you have rma'd before.

Charts updated.

Quote:

---

Originally Posted by Hell Hound

Being able to use performance gained is so much sweeter,5ghz 24/7 or 7ghz for 10sec.
Don't down talk stability because you know you have rma'd before.

---

You are right, I RMA'ed a $40 kit of ram once because it couldn't run stock. It was obvious by the bsod's I was getting in normal use.
I'm able to use my 4.1 Ghz OC 24/7, and I didnt stability test it, so what does that tell you? Maybe I already know where the wall of stability is on my chip because I know how stability to non stability scales.

I quite enjoyed my 5.2 Ghz on DICE for about 5 hours.

Finally got 1 to play with. May do better with some cooling maintenance.

Benchable cinebench/p95 etc

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: sorry impatient when installing :D
CPU Frequency: 3999MHz
CPU vCore: 1.5V
CPU Multiplier: 19x
CPU Turbo: Disabled
CPU NB Speed: 2730 MHz
HT Ref Speed: 210 MHz
RAM Speed: DDR2-1130
RAM Timings: 5-5-5-15-2T
RAM Configuration: 8 GB (4 x 2 GB)
RAM vDIMM: 2.3V
Motherboard: Asus M4A79 Deluxe
Chipset/Socket: AM2+, 790FX + SB750
Cooling: Water swiftech storm II
Temps: 30C Idle / 52C Load (needs cleaning)
Operating System: Win 7 64bit pro

Quote:

---

Originally Posted by Hell Hound

Being able to use performance gained is so much sweeter,5ghz 24/7 or 7ghz for 10sec.
Don't down talk stability because you know you have rma'd before.

---

I've run stupid overclocks on my CPU with no stability testing and it never crashed at all, either browsing the web or playing Supreme commander.

Personally I think you're too anal about stress testing to be allowed on this forum..

Time to go look @ war films and cuss the almighty.:cussing:

Don't complain when rma's get denied.

Quote:

---

Originally Posted by Hell Hound

Time to go look @ war films and cuss the almighty.:cussing:

Don't complain when rma's get denied.

---

it certainly won't be your problem.:cool:

Well, here is mine. This is what a get so far, Ill try to push it to 3.8/4.0 but need some time

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: CCBBE CB 1031MPMW (Im almost sure....)
CPU Frequency: 3616.4 MHz
CPU vCore: 1.360 V
CPU Multiplier: 18x
CPU Turbo: Disabled
CPU NB Speed: 2812.8MHz (1.35 V)
HT Ref Speed: 200.9 MHz
RAM Speed: DDR3-1600
RAM Timings: 8-8-8-18-1T
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.7 V
Motherboard: Gigabyte GA-MA790XT-UD5P
Chipset/Socket: AM3, 790FX + SB750
Cooling: Corsair H50 + DeepCool UF120 P/P
Temps: 30C Idle / 55C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable Prime 95 64BIT Blend 8h 9m 0 Errors 0 Warnings


Ill update later.


PD: Sry for my english.... i know its not the best hehe


EDIT:




Im having some problems with the mind blowing 4.0GHz xD. I was testing if the processor can actually work at that frequency, so i put all other values at stock or under stock.

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: CCBBE CB 1031MPMW (Im almost sure....)
CPU Frequency: 4000 Mhz
CPU vCore: 1.488 V
CPU Multiplier: 20x
CPU Turbo: Disabled
CPU NB Speed: 2000 MHz (stock V)
HT Ref Speed: 200 MHz
RAM Speed: DDR3-1333
RAM Timings: 9-9-9-20-33-2t
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.7 V
Motherboard: Gigabyte GA-MA790XT-UD5P
Chipset/Socket: AM3, 790FX + SB750
Cooling: Corsair H50 + DeepCool UF120 P/P
Temps: xC Idle / 65C Load (TMPIN2 in HWMonitor was under 68C)
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: "Stable" Prime 95 64BIT Blend 8h 0 Errors 0 Warnings

I seted up a Blend test in Prime95 and went to sleep. This morning after 8h the test showed no errors at all (i have the result.txt). But i decided to open BFBC2 while Prime95 was still running (I can use League of Legends at the same time, so i just open it to test a little bit more if it was rock solid). But... supercrash, PC restarted (BSOD, memory dump) and Windows 7 didn't boot (got stuck in the loading animation, it wasn't an infinite loop, the animation just stopped). I said some pretty bad words and go to work... now, after repairing the W7 boot, here am i trying to figure out what the hell is wrong with this.

I thought i was going to have no problems. I mean, isn't 8h of prime enough?? Maybe the PSU??? I have a P&C Silencer 750w.

Here is something new from my 1st LN2 OC.

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: ------
CPU Frequency: 6520.77 MHz
CPU vCore: 1.84V
CPU Multiplier: 31.5x
CPU Turbo: Disabled
CPU NB Speed: 2070.9 MHz
HT Ref Speed: 207.01 MHz
RAM Speed: DDR3-1600
RAM Timings: 9-9-9-24-2T
RAM Configuration: 4 GB (1 x 4 GB)
RAM vDIMM: 1.65V
Motherboard: MSI 990FXA-GD65
Chipset/Socket: AM3+, 990FX + SB950
Cooling: LN2
Temps: -180ºC Idle / -190ºC Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Untested

I can run SP but not full stability test was done.

http://valid.canardpc.com/cache/screenshot/1901257.png

http://valid.canardpc.com/show_oc.php?id=1901257

Got my 1100t still waiting for the CHVF to arrive and I'll start some OC'ing :D

Charts updated. Sorry for the delay, folks.

As a reminder: Those submitting "stable" results need to show a picture of the result.

Just installed the New CHV and I'm loving it. I gave My 1100t to my brother, let say it's not a very good chip :P

http://valid.canardpc.com/cache/banner/1911341.png

....just got a new 1100T...1122APM....will test by the end of the week...

Quote:

---

Originally Posted by felix_w

....just got a new 1100T...1122APM....will test by the end of the week...

---

she might be too young and your just taking advantage of her.

it seems people are getting about 200mhz more out of thuban since a year ago, would like to see more test cases though now that 45nm is practically ending

CPU Model: AMD Phenom II X6 1075T
CPU Stepping: ACBBE CB 1023DPMW / HDT75TFBK6DGR
CPU Frequency: 3750 MHz
CPU vCore: 1.360V
CPU Multiplier: 15x
CPU Turbo: Disabled
CPU NB Speed: 2500 MHz
HT Ref Speed: 250 MHz
RAM Speed: DDR3-1333
RAM Timings: 7-7-7-20-1T
RAM Configuration: 8 GB (4 x 2 GB)
RAM vDIMM: 1.50V
Motherboard: Gigabyte 890GPA-UD3D rev.2.1
Chipset/Socket: AM3, AMD 890GX + AMD SB850
Cooling: h20, ek supreme + ehiem 1048
Temps: 35c Idle / 50-57C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable, 8h+ OCCT.

sorry for the bad picture, was tired when I woke up. tried for 4ghz but became unstable because off mobo on default/auto/stockvolt. think autosetting is bad, cl7 on cl9 ram is´t good for oc. but hey it works =)Attachment 118692

edit:
stable with 1.28v now =D
http://valid.canardpc.com/show_oc.php?id=2024102
(if I get the time I might validate it)

Updated

Just realised mine isn't on the untested list?
http://www.xtremesystems.org/forums/...=1#post4747224

Working on doing a stable bench...

Oops - forgot to post about this in this thread:

100% stable, been running this for about 2 months! :)

* CPU Model: AMD Phenom II X6 1090T
* CPU Stepping: Sorry forgot to get this! - Purchased April 2010
* CPU Frequency: 4013 MHz
* CPU vCore: 1.435V + LLC (1.48)
* CPU Multiplier: 20x
* CPU NB Speed: 2800 MHz
* HT Link Speed: 200 MHz
* RAM Speed: DDR3-1600
* RAM Timings: 8-9-8-24-1T
* RAM Configuration: 2 x 4Gb
* RAM vDIMM: 1.65V
* Motherboard: Crosshair IV
* Chipset/Socket: 890 AM3
* Cooling: Custom water (DDC + Supreme HF + PA120.3)
* Temps: 36C Idle / 56C Load
* Operating System: Windows 7
* 32/64-Bit: 64
* Stable/Suicide/Untested: Stable

Memory is Mushkin #996987 DDR 3 1866Mhz 9-11-9-27 (1T) @ 1.65v stock rating

http://i1022.photobucket.com/albums/...0MushkinC8.jpg

CPU Model: AMD Phenom II X6 1090T
CPU Stepping: ACBBE CB 1021APMW
CPU Frequency: 4063 MHz
CPU vCore: 1.403v
CPU Multiplier: 13.5x
CPU Turbo: Disabled
CPU NB Speed: 3000 MHz
HT Ref Speed: 2400 MHz
RAM Speed: DDR3-2000 (3:10)
RAM Timings: 7-9-7-24-1T
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.700V
Motherboard: C4F
Chipset/Socket: AM3, AMD 890FX + AMD SB850
Cooling:EK watercooling
Temps: 36c Idle / 51C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable ,Prime95

http://valid.canardpc.com/cache/banner/2014372.png
http://img844.imageshack.us/img844/7853/91915789.png

Uploaded with ImageShack.us

hey konlaos, very nice piece you got there...

what ram are u using ?

@felix_w
adata2000G v.2 , IC's elpida 40nm old Lot

really nice...i haven't had the time to test my new one 1122APM...currently using my Deneb 980...wish it is as good as yours....

Thought I'd give the Sabetooth a run with the 1100t, I had better in the winter on my chilled water setup, but not bad for warm water.

CPU Model: AMD Phenom II X6 1100T BE
CPU Stepping: (looking for lid shot)
CPU Frequency: 4214MHz
CPU vCore: 1.53V
CPU Multiplier: 20.0x
CPU Turbo: Disabled
CPU NB Speed: 2600 MHz
HT Ref Speed: 200 MHz
RAM Speed: DDR3 1600
RAM Timings: 7.8.7 24-2T
RAM Configuration: 2 GB (2 x 1 GB)
RAM vDIMM: 1.6V
Motherboard: Asus Sabertooth
Chipset/Socket: AM3+, 990FX + SB950
Cooling: Warm Water, Custom
Temps: 34C Idle / 64C Load
Operating System:Windows 7 Home Premium SP1
32/64-Bit: 64
Stable/Suicide/Untested: 2hr Prime95 Stable

http://3800z24.info/Phenom/1100t/4.2...table-2hrs.jpg

How many liters of water and mm of rad.

Never messured the fluid and it is a 3way RAD from Swiftech. Very short lines and a tiny res.

Here is a pick of what I have, different waterblock then this pick, but everything else is the same.

http://3800z24.info/Phenom/the-shiz.jpg

Hi there,

I purchased 2 days ago my x6 1090t CPU.

I have a :banana::banana::banana::banana:ty board Gigabyte 790x-ud4 DDR2 and I don't have Much control over anything - so bear that in mind.


Specs:

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: NA
CPU Frequency: 4157Mhz
CPU vCore: 1.45V
CPU Multiplier: 20.5x
CPU Turbo: Disabled
CPU NB Speed: 2000 MHz
HT Ref Speed: 200 MHz
RAM Speed: DDR2 800
RAM Timings: 5-5-5-18-2T
RAM Configuration: 2 GB (2 x 1 GB)
RAM vDIMM: 1.85V
Motherboard: Gigabyte 790x-UD4 Chipset/Socket: AM3, 790X + S750
Cooling: Scythe Mugen 2 Rev.B
Temps: 27C Idle / 46C Load
Operating System:Windows 7 Ultimate SP1
32/64-Bit: 64
Stable/Suicide/Untested: LinX Stable - Untested

http://valid.canardpc.com/show_oc.php?id=2068152 -- Max CPU-z ScreenShot

Update, CPU now are stable (1H Prime95)

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: ccbbe cb 1022cpmw
CPU Frequency: 4179 MHz
CPU vCore: 1.44V
CPU Multiplier: 17x
CPU Turbo: Disabled
CPU NB Speed: 2458 MHz
HT Ref Speed: 245 MHz
RAM Speed: DDR3-2133
RAM Timings: 9-11-9-28-1T
RAM Configuration: 8 GB (2 x 4 GB) G.Skill F3-17000CL9D-8GBXLD
RAM vDIMM: 1.65V
Motherboard: ASUS Crosshair Formula IV
Chipset/Socket: AM3, 890FX + SB850
Cooling: Prolimatech Armageddon Push->Pull 120mm
Temps: 31C Idle / 56C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable

http://valid.canardpc.com/cache/banner/2136342.png

http://img15.hostingpics.net/pics/3060654179cpuz.png http://img15.hostingpics.net/pics/13...78cachemem.png

http://img15.hostingpics.net/pics/32...8cinebench.png

* CPU Model: AMD Phenom II X6 1100T
* CPU Stepping: -
* CPU Frequency: 4035.5 MHz
* CPU vCore: 1.488V
* CPU Multiplier: x17.5
* CPU NB Speed: 2077 MHz
* HT Link Speed: 230.8 MHz
* RAM Speed: DDR3-1846
* RAM Timings: 9-11-9-28-2T
* RAM Configuration: 2x4gb
* RAM vDIMM: 1.65V
* Motherboard: Asus Republic of Gamers Crosshair V Formula
* Chipset/Socket: 990FX + SB850, AM3
Cooling: Noctua NH-C14
* Temps: Idle Bios/ 30C Idle Hwmonitor/ 54C Load Hwmonitor / Ambient temp = 18-22C
* Operating System: Windows 7
* 32/64-Bit: 64
* Stable/Suicide/Untested: Stable

http://valid.canardpc.com/cache/banner/2146606.png

Quote:

---

Originally Posted by charged3800z24

Never messured the fluid and it is a 3way RAD from Swiftech. Very short lines and a tiny res.

Here is a pick of what I have, different waterblock then this pick, but everything else is the same.

http://3800z24.info/Phenom/the-shiz.jpg

---

WTH is that case? Made for overclocking? That's almost like a case version of the motherboard cardboard box case : )

It's Antec Skeleton, more like a benchtable, rather than a "case"...

I have serious problems overclocking the new Thuban 1045T (2.7ghz x 6) I just bought.
I seriously don't get what I'm doing wrong even though I'm checking and rechecking.

As a powersupply I have 500 fortron aura gold efficiency.
I have also as a motherboard a am3+ asrock with a 970 chipset.
4 banks of memory 4gb each teamgroup 1333mhz. With all settings as default, I tested them stable to 1600mhz cl9 1.35v.
VGA nvidia 560gtx 334 cores.
Cooling system is pretty efficient (a nice Xigmatek air cooler on the cpu) and temperatures are not a problem

I'm trying to figure it out the limit of the cpu.
Memory has been set during all my trials with 1.5v and a frequency between 1200mhz-1400mhz way below its limits and with relaxed timings.
The HT has been tried with frequencies between 1800-2100mhz.
NB has never been set over 2400mhz and I made sure it had plenty of voltage
Turbo boost has been disable.
CPU has been given 1.4v to see how it behaves. Standard voltage was 1.25v

I tried setting frequency higher with 250 x 13.5 (3300mhz) I could load into windows.
Getting higher wasn't possible.
Using only the multiplier (I have multiplier could be set up to 16x) I don't even get to 3ghz and I don't understand why.


Any ideas?

I must be pretty damn unlucky. I've done a lot of overclocking in my time and this 1055T I just bought seems to suck. Currently needing around 1.54v (Under load with LLC on) for only 3.9GHz! Will post more details another day when I've settled for a 100% stable OC :)

Light at the end of the tunnel. Turns out one of my sticks of RAM is faulty. Time to take advantage of cheap RAM prices and get a good 8GB set. Any recommendations?

Updated.

Remember: To qualify as "stable", you need to provide an image showing 8+ hours of some recognized stability test. While inconvenient, it's necessary as a bare minimum effort to ensure somewhat reliable information. It's not the end of the world, just run it over night some time.

It's taken a lot of time and testing, but I've finally found my stable limits. The CPU just isn't that great, 1.5 vcore doesn't even get me 3.9GHz stable :( The memory controller/L3 cache clock nicely though, around 3040~MHz is my limit with only 1.3v.

I also found that running Prime95 with the large in place FFTs test along with LinX at the same time yields load temperatures around 5C higher than using Prime 95, LinX or OCCT on their own. While Prime 95+Linx get me to around 60C, F@H only gets me to around 46C with all else the same, quite a drastic difference. But a good one considering F@H is always running, using all 6 cores and my GFX card too :)

Anyway, the results.

CPU Model: AMD Phenom II X6 1055T
CPU Stepping: CCBBE CB 1122MPM
CPU Frequency: 3860 MHz
CPU vCore: 1.48v (LLC High)
CPU Multiplier: 13x
CPU Turbo: Disabled
CPU NB Speed: 2970 MHz
HT Ref Speed: 297 MHz
RAM Speed: DDR3-1584
RAM Timings: 6-7-6-19-1T
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.65V
Motherboard: ASUS Sabertooth 990FX
Chipset/Socket: AM3, 990FX
Cooling: Air (Noctua NH-D14)
Temps: 29C Idle / 60C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable


CPUID Validation

Suicide validation, not that bad.

• CPU Model: AMD Phenom II X6 1090T BE
• CPU Stepping: CCBBE CB 1010MPMW
• CPU Frequency: 6636 MHz
• CPU vCore: 1.888V
• CPU Multiplier: 28x
• CPU Turbo: Disabled
• CPU NB Speed: -
• HT Ref Speed: 1185MHz
• RAM Speed: DDR3-1580
• RAM Timings: 7-9-7-21-1T
• RAM Configuration: 2 x 2GB
• RAM vDIMM: 1.6V
• Motherboard: Gigabyte GA-970A-UD3
• Chipset/Socket: 970 - SB950, AM3+
• Cooling: LN2 (K|ngp|n F1 EE)
• Temps: -190C Idle / -190C Load
• Operating System: Windows Vista Ultimate
• 32/64-Bit: 32
• Stable/Suicide/Untested: Suicide

http://i.imgur.com/pOrEE.png

http://valid.canardpc.com/show_oc.php?id=2297417
http://hwbot.org/submission/2265466_...0t_be_6636_mhz

...that 1010MPMW b#stard... not only it lives so far although the torturing...it reigns this thread... :up:

What was tha CPU-NB really ?

Not sure about CPU-NB, thats why I didn't write it. Should had been under 3000 for the validation. Not that it matters.
However still doing strong on the CPU-NB side (4700 - 4800 possible with LN2), but the cores require higher voltage than before for a given frequency, e.g. I was easily running 3Dmark06 at 6 cores and 4.5GHz 1.56V under water. Now it needs 1.6V on the same board (and bios). 70MHz down for wprime32 as well.

Hello Guys...

My turn:

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: NA
CPU Frequency: 4500 MHz
CPU vCore: 1.550V
CPU Multiplier: 18x
CPU Turbo: Disabled
CPU NB Speed: 2750
HT Ref Speed: 2000MHz
RAM Speed: DDR3-1666
RAM Timings: 8-9-8-24-2T
RAM Configuration: 4 x 2GB
RAM vDIMM: 1.65V
Motherboard: Gigabyte GA-890FXA-UD7
Chipset/Socket: 890 - SB850, AM3
Cooling: Scythe Mugen II Rev.B
Temps: -25C Idle / -59C Load
Operating System: Windows 7 Ultimate
32/64-Bit: 64
Stable/Suicide/Untested: Suicide

Link to CPU-Z validation:

http://valid.canardpc.com/show_oc.php?id=2314586

managed to leave this setup untouched for some hours, then i forgot i had it priming... :p:

CPU Model: AMD Phenom II X6 1090T
CPU Stepping: 1123MPM #0073
CPU Frequency: 4013 MHz
CPU vCore: 1.4875v (BIOS, 1.449 Load CPU, 1.452 Load DMM)
CPU Multiplier: 20x
CPU Turbo: Disabled
CPU NB Speed: 2809 MHz
HT Ref Speed: 200 MHz
RAM Speed: DDR-1070
RAM Timings: 5-5-5-18-2T
RAM Configuration: 8 GB (4 x 2 GB)
RAM vDIMM: 1.88V
Motherboard: ASUS M4A79 Deluxe
Chipset/Socket: 790FX AM2+
Cooling: D-Tek Fusion V2
Temps: 29C Idle / 47C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable

(Click to enlarge)

http://i256.photobucket.com/albums/h...ps924b4233.png


I managed to also run a LinX session, just 3/4 of memory, at 6144MB :


http://i256.photobucket.com/albums/h...-Upload-th.png





Older entry was 1100T 1105MPM #0803 that needed 1.575 for 4.1 Prime Stable Validation

Quick question, is it common to only get BSOD and never errors in Prime when your OC is unstable?

BSOD is most likely ram or cpu-nb related.

That stinking NB is giving me lots of BSOD...

CPU : 1055T
CPU at 1.45V 4GHZ
NB at 1.175V 2000 mhz

How high in voltage can I go with the NB?? Thanks

cpunb at 2000mhz cant u get bsod, ussually Thuban can around 3000 MHz with 1.3V, and around 2400 MHz with stock voltage