I was able to drop my fsb by 2MHz to get 31s :D
Printable View
I was able to drop my fsb by 2MHz to get 31s :D
a little improvement
http://membres.lycos.fr/cpulloverclock79/33s.JPG
the jap version of SPI is better under 2003... but it's not the solution :)
took me 34 secs.
and this is total owneage O_O: http://members.jcom.home.ne.jp/3233730401/23s.jpg
To have a good Superpi time (1M) :
Use :
* Windows 2k3
* Priority in real time
* a Virtual Disk with ramdisk (for example) + Maxmem=105 in boot.ini
* Japanese version of Super Pi
* minimum resources
They also use a program called maro, I dont know what it is but it helps to boost...
It works with PIFAST (10M)
http://219.113.251.125/c-board/file/...18.93_maro.png
http://219.113.251.125/c-board/file/maro_setting.png
nice.. you have a link to the macro program..
no, I havent :( ... for the moment :DQuote:
Originally posted by bias_hjorth
nice.. you have a link to the macro program..
http://www.akiba-pc.com/3.4E/SPI-31.jpg
Processor
SPI 8M calculation
P4 550 (3.4GHz) Prescott D0 stepping (L415B305)
Abit AS8 (bios 11)
2x 256MB HyperX 3200 1:1 SR-E-4-E-E / 3.2V
Stock cooling :D
http://www.xs4all.nl/~famchow/A64_34...00_2.97GHz.PNG
3GHz will hopefully give me 29sec :D
Thanks for the tips :)Quote:
Originally posted by cpulloverclock
To have a good Superpi time (1M) :
Use :
* Windows 2k3
* Priority in real time
* a Virtual Disk with ramdisk (for example) + Maxmem=105 in boot.ini
* Japanese version of Super Pi
* minimum resources
They also use a program called maro, I dont know what it is but it helps to boost...
It works with PIFAST (10M)
I tried several different RAM disk programs and all resulted in a slightly slower time :( These were all based on the Microsoft reference ram disk driver. Which RAM disk driver works best?
Well I've never run Super pi much in the past because I never had a decent CPU but this new 3500 seems to be doing nicely :)
AMD-64-3500 on an Abit AV8. Running 260x10 (Mem is at 5:4 though) scoring 35s.
System is straight water cooled and so far seems to be prime stable at 1.725v, running 42 degrees under full load.
Will post a screenshot later tonight.
Warden
my best super pi time
http://pc-tweaker.ch/Pictures/34s - 11x235 2-2-2-5.JPG
http://www.silentworks.net/sekalaiset/4600mhz1m.jpg
I thinks there was something wrong, because in my opinion the time sucks for that clockspeed (I reached 33s with a 4100Mhz Northwood) :confused:
:eek: Nice overclock!
What cooling?
The time seems not very good to me too
Thanks! :toast:
For cooling I used dry-ice and this:
http://www.silentworks.net/sekalaiset/kippo/1.jpg
I wonder why the time is so bad..
I used windows 2003 server, I used tight latencies with memories (2-2-2-5) runningn 1:1, I shut down every single unnecessary service I could find... what else can a man do?!? :mad:
Any suggestions for tomorrows re-run?
Ram frequency is too low.......That's why.........BTW , nice dryice tube you have got there......I think one of the best I've seen so far......Quote:
Originally posted by Hilppa
Thanks! :toast:
I wonder why the time is so bad..
I used windows 2003 server, I used tight latencies with memories (2-2-2-5) runningn 1:1, I shut down every single unnecessary service I could find... what else can a man do?!? :mad:
Any suggestions for tomorrows re-run?
Here's a 30 sec SuperPI of my own:
I know the RAM frequency is low, but i couldn't set the divider to 4:5 after I went over 200Mhz, so it had to be 1:1.Quote:
Originally posted by hipro5
Ram frequency is too low.......That's why.........BTW , nice dryice tube you have got there......I think one of the best I've seen so far......
And thanks, I love my tube also :banana:
I have more images about the dryice tube in here,
even though I havent got any updated pics yet (it's now soldered together with silver).
30"
http://utenti.lycos.it/agritech/foru...30_dj_rudy.jpg
p4c 800 full mod... (v.core, v.dimm, v.dropp, v.agp)
antec 550 +3,3v mod,
2x512 muskin pc 3500 level II @ 3,35 v.
Hilppa........
why you do not succeed to activate the 4/5 over the 200 mhz of fsb... ??? my friend burner man with 2.8 533:
http://www.burnerman.com/28a1/4519.jpg
I have no idea. I tried all the settings for mem.freq available, as I recall those were DDR400, 320, 266 and auto. Anyway, all of them resulted in either lower frequency than cpu, or the same (DDR400). Maybe I was a bit careless and missed something in the middle of trying to get this freaking ASUS mobo working at these temps.
Try setting boot up FSB below 200MHz ?
Like 199 and then up it from Windows w/ Setfsb. Should give you the ram divider you want :)
Is this 2.8 533FSB OC with dry ice too?
29 with dry ice and 28 @ 4830 with ln2
Yes it is with dry iceQuote:
Originally posted by cold_ice
Is this 2.8 533FSB OC with dry ice too?
Thanks :DQuote:
Originally posted by macci
Try setting boot up FSB below 200MHz ?
Like 199 and then up it from Windows w/ Setfsb. Should give you the ram divider you want :)
I must have been inhaling too much ethanol+CO2-fumes yesterday because I didn't figure that out...
I did some more test on the dryice-leftovers today, and achieved this with the 4:5 divider:
http://www.silentworks.net/sekalaise..._333div_1m.jpg
Too bad my BH-5's didn't go any faster, I gave them 3.6 volts.
And here is the newest record on my 2.8A chip:
http://www.silentworks.net/sekalaise...4700mhz_1m.jpg
:toast:
Just wondering would it pay off to put some LN2 in the tube? Would 5GHz be reachable on this chip?
I got one...:D
http://www.e04hardware.com/record.jpg
Where can I find the Japanese version op superpi ?
http://membres.lycos.fr/boblemagnifi...superpi36s.png
2500M AQYHA 0410 TPMW
DFI Ultra Infinity
2*256 BH5 2/2/2/11 Synchro
Full Air :)
Damn...everything is right..CPU mobo etc, couldnt get the LN2 working, i give it a try end of this month:)
r404(not 100% tuned)
http://www.gabbax-projects.com/8m%20copy.jpg
EDIT "Hilppa" Yes i do think u can easly reach 5ghz with LN2.
Not a fast time except that it's 80 F and I'm cooling with a 92 mm tornado and a Thermalright 900A... :D
http://img.photobucket.com/albums/v3...s/MaxedAir.jpg
I really think there is something wrong with your system, since here is what I came up with 2.8C at the same clockspeed and some -10 Celcius degree water:Quote:
Originally posted by gabbax
[B]Damn...everything is right..CPU mobo etc, couldnt get the LN2 working, i give it a try end of this month:)
http://www.silentworks.net/sekalaiset/Snap2.jpg
EDIT: My mistake at this time of the night, didn't notice you had the 2.8A... would you mind telling te FPO/BATCH number of that processor?
Yepp ofcourse "L408B106"
Yess its easy to do a mistake;)..But its seems that ive fixed it with "tonys aka BigToes" unleashing DDR533" BIOS, i can crank up the Mem sped now, at 171FSB(AIR) mem doing 226...but it seems this BIOS have a coldboot issiue? wont let me start....with r404...
For what mobo is that bios for? P4C800**? If you could throw me link to those files I would appreciate it..
Propably no point in asking, but have you set the cpu temp from hardwaremonitor to "DISABLED"?Quote:
.but it seems this BIOS have a coldboot issiue? wont let me start....with r404...
Yepp for the P4C800-E del
Yes its all deiss...damn, id luv to hear what BigToe have to say about this:)
heres the Link
Unleashing DDR533 on P4C
Thought I may as well reply here for my first post.
here's my Super PI bench.
http://img.photobucket.com/albums/v1...k/super_PI.jpg
nothing but my video card overclocked.
ram set by SPD.
i think asus probe is accurate as far as the volts go...and thats an idle temp. This is my current top end for stability, but I'm swapping memory tomorow thats rated for 216mhz 2-3-2-6, so this might get better.
http://img44.exs.cx/img44/5384/32secondsScreensmall.jpg
2 awesome scores with DDR2 :slobber:
CPU : Pentium4 560 ES , V Core1.6175V
Cooling : Retail Sink+SANYO92mm*2+Aguri stops simply!
M/B : ABIT AA8-3rd Eye (i925X)
Memory : SAMSUNG K4T56083QF-GCD5 422 PC2-4200 256MB (Dual)
OS : Win Net-Server 2003 iAg‰ü with Team AB-Boy+SP+TDj
Room temperature : 15Ž
http://members.jcom.home.ne.jp/aguri...16-pi1M27s.png
CPU : Pentium4 560 ES , V Core1.5875V
Cooling : Retail Sink+SANYO92mm*2+Aguri‚ª:banana:ȈՂɗ¯‚ß‚Ü‚·I
M/B : ABIT AA8-3rd Eye (i925X)
Memory : SAMSUNG K4T56083QF-GCD5 422 PC2-4200 256MB (Dual)
OS : Win Net-Server 2003 iAg‰ü with Team AB-Boy SPj
Room temperature : 20Ž
http://members.jcom.home.ne.jp/aguri...0x16-1M28s.png
mon dieu!
doh
Holy crap. That's about 3 seconds faster than with 2-2-2-5 DDR1 memories running the same speed. Anyone want to buy 2-2-2-5 260Mhz @3.5V BH-5's? :p:
I guess the board (chipset) helps alot too... could someone post some results on 915 chipset and DDR1 memories?
Thats not even DDR2-533, I'm sure its running higher than that, the memory is just running faster than the bus.
I don't get it!!!.......I sure don't like something here.... :rolleyes:
hmm ddrII ey...these must be running an astonishing speed to get that result.. seems fishy..
Not bad, mate :thumbsup:Quote:
http://www.home.no/f-14jmr/BIT%20TEC...s%20hahaha.PNG
Vapochill PE
A64 3200+ clawhammer @ 2650mhz
Gigabyte k8nsnxp (waiting for the DFI so I hopefully can push my cpu further)
1X1gb OCZ EB platinum
may i ask what vcore that is at? amazing btw
1.8v :DQuote:
Originally posted by drcrawn
may i ask what vcore that is at? amazing btw
My improved score:
http://img62.exs.cx/img62/6733/34s1.jpg
I am impressed by the OCZ EB. At 3.0v I could overclock the 2x512mb sticks up to 260Mhz, which is exactly the same as my previous 2x256mb kit. That's cool! :D
2600+ Mobile
http://mitglied.lycos.de/freestylerc...Super%20Pi.JPG
a bit slow i think, cause of timings 2,5 3 3 11
free
Yeah, if you could tighten the timings, you probably would get 1 second faster. And there's no more fsb MHz you squeeze out of this rig??
:D
my nf 7-s insn't compatible with the BH 5 i have, therefore it only runs with infineons, and bad timings.
i think 37s are impossible , hmm we will see.
greetz free
Maybe try an AN7 or DFI LP B?! :DQuote:
Originally posted by freestylercs
my nf 7-s insn't compatible with the BH 5 i have, therefore it only runs with infineons, and bad timings.
i think 37s are impossible , hmm we will see.
greetz free
oh no, i did not spend money in a new Socket A Board,Quote:
Originally posted by SAE
Maybe try an AN7 or DFI LP B?! :D
the A64 is coming, and my Barton Mobile have a break.
the infrastructure of the NF 7 is nearly 3 years old.
And my BH 5 are waiting for the nforce 3......perhaps better as on nforce 2
free
p.s. my english isn't the best, excuse it.
http://img41.exs.cx/img41/244/Currentsuperpi.jpg
a quick run with new memory, i think im pretty close to pulling a 31 soon....
oh this is with 2-3-2-6
wow, looks fine.
are all FX so pretty in low voltage, 1,69V 2650MHz is nice
free
yeah I dont have chilled cooling...this is it for me. the cpu will just not run at 2.7 no matter what volt I give it. I dont have the cooling. But 2650ish is totally stable.
the 940 fxs turned out to be poorly supported...I will probably never see a board with working bus locks (thanks asus, is it so hard to make a handful of boards for us with the via pro chipset?)...
first score by Aguri with a S775 Prescott and an english version
CPU : Pentium4 560 ES , V Core1.6175V
Clock(MHz) F 4288.0@,@FSB(MHz) F 268.0
Cooling : EVERCOOL Water Cooler WC-201+Aguri stops simply!
M/B : ABIT AA8-3rd Eye (i925X)
Memory : SAMSUNG K4T56083QF-GCD5 422 PC2-4200 256MB (Dual)
OS : Win Net-Server 2003 iAg‰ü with Team AB-Boy+SP+TDj
Room temperature : 17Ž
http://members.jcom.home.ne.jp/aguri...6-pi8M5m6s.png
and 35s at 3300MHz with a FSB236!!!
http://members.jcom.home.ne.jp/aguri...14-pi1M35s.png
Did some tweaking. Managed to shave another second off.
http://img.photobucket.com/albums/v3...erPi253X12.jpg
My best so far:
http://ojdr2001.com/spi27.jpg
This is with the LP-B in the Toaster sig. On water.
http://home.bendbroadband.com/bypola...e_18_32_19.jpg
Wow. Nice clocks :DQuote:
(time too ;) )
What board is that with?
Giga K8nsnXP-939
beautiful board when you know it....
Great job, and ain't it always true that you have to know the board and how to take it? ;)Quote:
Originally posted by ojdr2001
Giga K8nsnXP-939
beautiful board when you know it....
Thanks, that is absolutelly correct, Sir:)Quote:
Originally posted by SAE
Great job, and ain't it always true that you have to know the board and how to take it? ;)
More to come.....
Hehe. I am looking forward to it :)Quote:
Originally posted by ojdr2001
Thanks, that is absolutelly correct, Sir:)
More to come.....
Push it... :thumbsup:
AMD64 3400+ Newcastle with MCW6002/MCP650 cooled
AN50R rev1.3
Albatron MX480EL
2x 256MB KHX3200K2/512 BH-5 @ 263mhz 2-2-2-6 1T at 3.61v
http://fileshosts.com/AMD/boards/Shu...superpi-1m.jpg
Just need more vcore to go higher heh
Hmm... anyone else with 30s on an Athlon XP??? Mach2 GT is stock.
really nice score :slobber:Quote:
Originally posted by SAE
Hmm... anyone else with 30s on an Athlon XP??? Mach2 GT is stock.
nopez, not many SAE :P your XP is rare :slobber:
Heres mine A64 3400+ Newcastle.. 30Sec :slobber:
http://www.xs4all.nl/~famchow/A64_3400/test_2.9GHz.JPG
already hit 29sec!!! at 3000MHz.
hehe, I 've never seen anyone being better even on LN2... and my mach2 gt is stock ;)
yeah superpi is hard... but pifast is even harder... and that's where the a64 kicks a$$ :thumbsup:
:slobber: :banana: :toast:Quote:
Originally posted by SAE
Hmm... anyone else with 30s on an Athlon XP??? Mach2 GT is stock.
AMD Athlon A64 3400+ @346x9 2v = 3.108Mhz
Dual Cascade cooling power by Ricky -100ºC / -92ºC load
http://home.kqnet.pt/wo034892/28SecSuperPI.jpg
woah so that's what a 3400+ Newcastle needs for sub 30s scores :)
wow nice pedro rocha :) is it a clawhammer or a newcastle?
My modeste score... 39s
http://overclock.home.sapo.pt/OC/39s.JPG
http://www.akiba-pc.com/3.6E/27.PNG
P4 560 @ 4722MHz (18x262) / 1.4V
Asus P5P800 (VDDR & VAGP modded)
2x HyperX 3200 256MB 2-2-2-5 / 3.42V
nVentiv Mach2 R404
@2241MHz (1,7V :sick: ) = 40s
Here's my best,so far.
This is my Pi :D
Only Singlechannel and low FSB, but i like the Proz. :banana4:
http://people.freenet.de/funkflix/pi36.jpg
@zeon
U should get a better Result, if u really benched with 10,5x245
Dualchannel 2-2-2-11! Think around 37 sec.
SuperPi likes FSB and Timings.
yep... got a bit better ^_^ Defrag and a litle fsb extra ;)
Strike !! :toast:
Congrats.
A64 3000+@2600MHZ 1,6V
MSI K8N Neo Plat.
2*256MB OCZ PC3500EB@260 CL3-2-3-5@2,85V
Radeon 9800Pro
CPU+GPU watercooled
http://www.forumdeluxx.de/gallery/da...uperpi_34s.JPG
Still not happy with the mem but that's work in progress.
http://www.takorautaa.net/artikkelit..._superpi8m.jpg
http://www.takorautaa.net/artikkelit..._superpi1m.jpg
Too bad I forgot to run superpi 1M with the same clocks (5212Mhz or more) :stick:
wow, do you use 4:5 bios?
I don't know what you mean by 4:5 bios?
I use 1:1 memdivider, so that CPU is 250Mhz and mem is 250Mhz.
If you mean 533Strap, I was not able to use it after about 4,8GHz.
I had to change to 800strap to make it all the way to 5,2Ghz, which is bad because 533strap is so much faster.
If anyone can tell me why I was not able to use 533strap, please tell me :confused:
Hilppa you're a crazy dude M8.....!....Here's one to you.... :toast: :D
Cheers !! :toast:
Getting back to it tonight... I got two chips of "5Ghz 2.8A" and a 550 that runs 4,1Ghz on stock air... and some liquid nitrogen and dryice :banana:
Well Hilppa nice, but I think I need an upgrade in 8M M8 :DQuote:
Originally Posted by hipro5
Yes thats on a F53, and still the old 940 and the ECC ram:
the ramvolt is close to 4 volt on the SK8V
The ranking list is here:
http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
very nice score Tom Holck :eek: :toast:
Good job Hilppa ....thats Extreme, and the 2.8A who runs at 4.1 it's unbelievable :eek: