Truth be known..... I don't think they have a clue what they are doing...... LOL
Truth be known..... I don't think they have a clue what they are doing...... LOL
True...I happened upon a new Abit release while looking for something else at Fry's just now :D It better work (at least decent out of the box) or it goes back and possibly along with it's big brother...Quote:
Originally Posted by Lvcoyote
I will be rma'ing my review sample....it never booted once into Windows with full keyboard and mouse support. I told them to flash the baord they send me to the newest Beta BIOS and make sure it will boot into Windows with full keyboard and mouse support before they send it to me.Quote:
Originally Posted by OldGuy
Sheesh...I've spent over 30+ hours trying to get this darn board to post....or boot. It pisses me off that there are two sites depending on me for a review of this board....and I may never be able to get that review out if Abit can't get me a board that boots corectly....
Can not log in :DQuote:
Originally Posted by Lvcoyote
What did you find:stick:Quote:
Originally Posted by OldGuy
Quote:
Originally Posted by OldGuy
I bet it's the 650iQuote:
Originally Posted by palese
Thats a b**ch. My 1st up died all of a sudden and it was a freebe so I went out and bought a 2nd. #2 was flaky as hell at 1st but for some reason it has straightened it's act out and is now running good. Beats the heck out of me...maybe it needed to run for awhile, LOL>:confused:Quote:
Originally Posted by Philly_Boy
Check your battery. Some were finding that even though they tested it at 3v the board would work better after replacing it.:shrug:
Is this normal, my board makes squeaky noise, I think it's caps, but only when idle in widows, on load eg. orthos the noise is gone
Why are some people running BIOS v1.1 but it's not up at Abit's sites?
If you were a true gambling man you'd have some coin in hand right about now :D Aint namin' names or making no claims till I get this lil sucker up to snuff...Quote:
Originally Posted by maxwedge
i got the fp-in9 a week ago, still in the box.. maybe i'll play around with it during the weekend..
would you guys like a little photo session? let me know.
ordered the gigabyte 680i and will have it monday.
btw, abit is in a real mess with the forum.. they found the solution to their problems back to the future style!!! now they have all the time to develop a new bios!!!:D
who knows, maybe you can find some good breaking news about the new pentium 3 processor there!!!
EDIT:SEEMS BETA11 IS OUT!! CHECK:http://forums.hexus.net/showthread.php?t=100494
We need a link for Beta 11, any one have it?
I've asked for the BIOS on the Hexus forums, but I think it may just be a false alarm. My hunch is that he's just got M622A_11.zip, which actually contains beta 5. I'd be glad if someone proved me wrong, though. We need a new BIOS now now now! :D
Probably is a false alarm, Right now I think ABIT is going down in SMOKE!:slapass: I will most likely not purchase any more products from them unless they get their act together & support their products better, and get the Forums fixed!!:nono:
Email to Sean last night...
Hi Sean,
I notice you are sending out BIOS v11 for the above board, does that mean it's an official BIOS or another beta?
I am currently on beta 6 but would appreciate a newer BIOS if one exists, thanks.
---End Quote---
Im currently on holiday and don't have access to my files. The version that I am sending out is the final release of v1.1.
Please send a request to technical@abitcomputer.co.uk
Quote:
Originally Posted by mark0326
If it is "official" why the hell isn't it on their FTP?
WTF, this penny ante :banana::banana::banana::banana: from them is annoying.
:banana::banana::banana::banana: it, hopefully be up soon, or someone will get it and post a mirror
Oddly, it seems the people that have it already are keeping quiet, either they are so pleased with it that they have no reason to visit the forums ... or they have been told to keep it quiet.
Ummmmm.....What do you think we all have been running???:slapass: All these betas have been v1.1;) The beta 6 is>>>>M622A_11.B06...see the 11??:DQuote:
Originally Posted by OKsoVRomoSkylo
I'm a little overextended right now so nothing new for me for awhile. But as I type this I realize I'm misunderstanding you. I figured you got a new abit.:DQuote:
Originally Posted by OldGuy
Quote:
Originally Posted by maxwedge
yeah, so where is the final, hopefully one that actually works? without bugs and quirks, where I have to pull out a ps2 keyboard to do anything like accessing safe mode?
look man, not trying to bust your balls, but I am tired of waiting for the "it is just around the corner" bios, I just want one that works as the board is intended, and promised.
Beats The F*** out of me and if you think I work for abit you're seriously misinformed! I'm in the same boat as you.:fact:Quote:
Originally Posted by linflas
Heres my latest 24/7:)
This is small FFt's and it's blending fine now.
I'm running chilled water on the cpu and nb. My water temp is at 60f/15c and can go much colder (yes it's adjustable). The pwm hs is modded.
EDIT: Cpu is set to 1.3725v in the bios and all other voltages are default.
http://i76.photobucket.com/albums/j7...rSmallFFts.jpg
@max:that's abit sean's reply...Quote:
Im currently on holiday and don't have access to my files. The version that I am sending out is the final release of v1.1.
no beta in his words mate...
what gives???
Thats good news.Quote:
Originally Posted by OKsoVRomoSkylo
I guess we could get it next week...it's not even on the ftp site yet.
Thanks for the info:)
fair enough maxwedge, just figured since you help moderate their forums you might have more idea. Because either you or LVCoyote posted many times on the old forum, before they were torn down, that the "official" release was going to be soon, that was weeks ago.Quote:
Originally Posted by maxwedge
If you have no clue either, then that is all I needed to know. I am just tired of the little quirks of this bios, and am ready to be done messing with my box, and just be able to use it without hickup.
Nice clock also, I can't get my 30B stable at 3.6 at that voltage, need 1.425 bios for mine. Nice work.
ok guys, i think i'm about to quit the abit boat...
after hundreds of installations, having seen all sorts of mb related problems ,i cant believe i'm getting this :banana::banana::banana::banana: from abit. for the past 15 hours i'm just trying to setup windows on a freakin fp-in9 board. the issue is no keyboard or mouse after some point during the setup process.
i have tried almost anything i could think of.
i even cloned a clean windows disk from the 32x max.. will boot windows, but no keyboard no mouse... usb or ps2...
on single sata or raid or ide disks... with four different graphic card combis, four different memory pairs,two psu's...countless bios settings...
i'm just freaking angry right now..
don't ever think of wasting money or time on abit's joke boards.
Aside from not being able to load an OS on a raid array and initially no SLI I'm up and running quite nicely at the moment with my FP. I spent several hours trying to get raid going but no dice. Using the drivers from the CD it always fails at some point copying files during install. I made a floppy going the DOS route then after giving up and going to a single drive I made a floppy from the OS and gave it another shot. No go again. Using my 32X max drivers get's through the install to the desktop then fails on the first reboot when complete. Correct drivers should clean this up...I hope :DQuote:
Originally Posted by OKsoVRomoSkylo
I'm just gonna get an orthos stable setup going for now and not worry about raid. I'm using a PS/2 KB and a USB mouse without issue OKso so I would box that board up and exchange or replace it...before you take a hammer to it :explode2:
I don't know if I've said it here but abit hasn't been communicating with the mods, or anyone for that mater, on the abit forums about a month now. I remember I asked about the availability of the heat pipes for you and they never replied. About a week after that we found out that our main administrator and webmaster had been fired. And now all the BS with the forums crashing last week and again this week end. And they still don't tell us anything.:mad: Their going to need to straighten up or they'll be looking for new mods, if they care at all.Quote:
Originally Posted by linflas
About the bios...the last we heard was when beta 2 was out and they said 3 was unstable. Then beta 5 and 6 leaked. When we said 'soon' that is what they told us then.
Sorry your still having issues.:(
Thanks.Quote:
Originally Posted by linflas
Cold water helps but this is also a new board and my other E6600 I had in another system. I don't know if I'm doing better now because of the board or the cpu, ie change one thing at a time if you want good data!:slapass:
I'm happy but want a new bios too....:(
Are there any 680i specific guides available that explain the relationships between FSB & memory relating to overclocking & that you don't need to be a rocket scientist to understand?
I have been raisng my FSB this morning and have found that some FSB settings are good while others are quite bad on certain memory benchmarks. Today I tried keeping to FSBx4 figures that were divisable by both 9 (my multiplier) and 4 (quad pumped) but that was a waste of time, how can you tell what will have a fair chance of working and what won't? What's the secret formula guys?
Having done that, now when I boot my USB mouse doesn't work in Windows, I have to unplug and plug it in again!
For now I'm running 1:1 on the memory if that makes any difference.
Just to add an optimistic touch to this thread;
I am running stable (both XP and Vista Ultimate 64bit) @ 410FSB 3.7GhZ E6600. That is for the last 3 weeks. My keyboard is also set to BIOS and works fine! That is with the stock BIOS. I am also running 2x 8800GTX SLI, An Audigy 2 ZS Platinum Pro and I am on a RAID 0 Raptor array so I guess I am fully stressing the board. For the last 3 weeks I have played games a lot and not a single crash. My standard resolution is 2560x1600 since I am using a 30" LCD so I satisfied till now and with a new BIOS I think my CPU could even hit 3.9GHz since it even boots @ 4Ghz but it is not stable at all.
That's all so don't give up.
In regards to the mouse issue, I have been running a usb mouse through a KVM switch and a usb G5 gaming mouse hooked up directly to the mb with NO problems at all. I am using Beta 06 BIOS.
I dont have the pictures to post as of right now (Im in Japan) but before I left I was at 3960MHz Orthos stable for 8+ hrs. That was 440x9, memory at 1:1, vcore 1.55v. My goal is over 4.0Mhz with 500fsb stable as a rock.
Fact: I do believe that you need to cool your NB with a fan to get high overclocks. As soon as I unplugged the fan, it shot up to over 110C and I got a BSOD in windows XP. Slapped the fan on again and no problems.
I agree with JargonGR, this board can run great, and even greater with a new BIOS.Quote:
Originally Posted by JargonGR
That's my only real complaint right now. I went back to the shipping bios. The issue with that one now is it won't stay set at 1T where as it did originally before flashing to B06. The trick for not losng your FSB settings (with mine anyway) is to F10 out of the uguru menu...if you make some memory changes and F10 out of that menu she reverts to stock FSB everytime. Profiles don't retain all settings, only voltage and memory. B06 didn't work at all for me in that arena. EIST doesn't work on either bios.Quote:
Originally Posted by FlyBoyGeo
The FP IN9 is keeping me entertained for now while we wait for an "official" bios that hopefully addresses what needs to be fixed. Thus far the FP is just about on par with my Infinity 975X/G. I had this puppy seemingly stable everywhere but large FFT's which which would run for a few minutes then reboot. Tried all manner of combinations running "unlinked"...Switched to linked and a 3:2 divider and typing from her right now at 4-3-3-12 DDR1066, 400 X 9. By this time she would have rebooted running unlinked so now I need to get back up to 415 X 9 and see if she still flys. Had all manner of grief trying to get raid running but failed. Aside form that I'm getting the hang of her and liking it better than the MAX...
Hi guys i'm about to by this board and there is a question who turn in loop in my head what is the higher QX6700 MAX FSB ever seen on a IN9 32X-MAX retail board ? And is there some mobo revisions better than others ?
Thanx for all,
Regards
Not sure on the highest FSB thing, but there is only one revision of the board.Quote:
Originally Posted by pepinorang
QX6700 owners should stay away from Abit motherboards. The Abit engineering geniouses messed up the board and the multiplier adjustment does not affect all 4 cores, only 2.Quote:
Originally Posted by pepinorang
Proven on all 965, 975 and 680 Abit boards, I bet my right arm that the 650's also suffer from this "feature".
And they are probably not even aware of it.... LOL
Well, Finally got the WC setup done.
Come to find out after working fine, the bios is corrupt now.
I go to Abit-USA site to download the beta 6 bios, and lo and behold, their forums have reverted back to the beginning of 2005.
2 years of posts gone.
I bought this motherboard, with the eventual idea of upgrading to quad core in the summer once the price drops hit. Guess I can only do that if I want to run it at stock.
A completly unstable shipping bios, beta after beta updates. No word of a stable bios revision. Multiple problems not fixed. Non existant support on thier website.
A proven history of not supporting motherboards after 6 months or so.
You know, My IC7-Max3 had at least 10 bios revisions.
I think I have finally decided that this motherboard is going up for sale.
I really wanted to try and give Abit another chance, since they were the best thing to ever happen to the S478 motherboards. (Hugs his IC7-Max3)
Enough is enough.
Anyone suggest a good 975x Motherboard?
The forum should be back tomorrow, but I'm sure the beta 6 can be had other places.
Yeap, stick with an Intel XBX or Asus P5W board.Quote:
Originally Posted by Spazilton
Stay away from the Abit AW9D, especially if you are planning to get a quad:
http://img50.imageshack.us/img50/6349/abitwtfmg3.th.jpg
Yea I'm probally going to go with a BX2.
Should be able to get 280 or 290 for this motherboard.
The quad has not been that impressive on any board unless you freeze the darn thing:fact:Quote:
Originally Posted by Chosen.
.....and why's that?.....:)Quote:
Originally Posted by palese
This is a QUAD on AIR with Tuniq heatsink.......;)
http://www.thelab.gr/images/Hipro5/A...2_404MHz_3.png
http://www.thelab.gr/images/Hipro5/A...2_404MHz_1.png
http://www.thelab.gr/images/Hipro5/A...3_400MHz_2.png
http://www.thelab.gr/images/Hipro5/A...400MHz_fsb.png
SINGLE VGA on air...
http://www.thelab.gr/images/Hipro5/A...621_1000_1.png
http://www.thelab.gr/images/Hipro5/A...621_1000_2.png
http://www.thelab.gr/images/Hipro5/A...621_1000_3.png
....off caurse this mobo IS moded......;)
A newer bios is going to show up this week to support ALL FOUR Cores of a QUAD when changing multi.........Let's hope it'll work.......Crossing my fingures......:)
.
Well, so much for that. My email to Abit UK was undeliverable !?!?!?!?!?Quote:
Originally Posted by mark0326
I'm beginning to regret buying this board now, come on Abit!
I threw this: http://forums.hexus.net/showthread.php?t=101371
over at the hexus forum, hopefully somebody will reply..
edit: maybe you guys could drop a request in the above thread too.. more is always better than one..
You didn't even see my screenshot, did you?Quote:
Originally Posted by palese
My Quad can do 3.8GHz in watercooling, this screenshot was to show that when you increase the multiplier of the QX on an Abit board, it affects only 2 of the 4 cores. Now, check your QX again and revise ;)
I even met a guy in the Abit forums, that had his QX6700 running at 4.5GHz (17*266) on his un-modded prommy and when we proved to him that the reason his prommy can do this, is because only 2 cores run at 4.5GHz (17*266), while the other 2 run at 2.66GHz (10*266) and his response was "Well it's better like this, cause I wouldn't be able to oc to 4.5GHz if all 4 cores followed"...
Abit fanboys, go figure... :confused:
Get me a copy of it and I will gladly host it.Quote:
Originally Posted by OKsoVRomoSkylo
Done...Quote:
Originally Posted by OKsoVRomoSkylo
Very nice but at what temps?
Quote:
Originally Posted by hipro5
20 - 22*C room temp.....A delta fan 12 x 12cm was also placed to force air through the heatsink....;)Quote:
Originally Posted by palese
Looking over at hexus, some people already have bios revision 11 which would indicate a full release.
Abit just did a ton of new bios files today, why in the hell did they not release this one.
Thanks good Old-Marcus-Delirious-Guy !!Quote:
Originally Posted by OldGuy
Also thanks for not letting me hammer the fp to my crap-tech-art wall.. i was thaaat close..
After a very well devised plan, i was able to make a clone windows disk with all possible nvidia chipset and keyboard-mouse drivers installed on it, and after juggling with 3 mice and 4 sets of keyboards, was able to restore the clone disk on the fp...
i bet it could be done with a raid array as well.
now running on a very stable 3.2g with a 6600 on air,
memory very happy @960 4-4-4-12 1T unlinked. no sli.
i'll try the quad later and see what it does with the multis,
and the pwm's loaded.
also found out that the sli switch wont work in the normal position for me...:rolleyes:
Cool...now that you have it up and running I think you might actually like it...maybe. Memory timings look pretty sweet...can you do a quick run of orthos large fft's and see if she reboots on ya (or at least fails)? Just curious to see if it's me or my board or the bios or my memory :D She'd only run maybe 5 to 8 minutes then just reboot. Works great linked though....Quote:
Originally Posted by OKsoVRomoSkylo
EDIT:What are you running for memory by the way????
yeah unless this new bios is better and it reports sub 0c temps im going to go back to my evga with the new revision(when i get it in)
im having problems running my fsb around 500 and above
im fine all day long @ 480 + or -
________
Vapir No2 Review
People over at Abit Forums are reporting that tech support lines are going un-answered.
Not giving me a warm feeling.
I am really worried now about the IC7-MAX3 I have sent in for RMA repair now.
tried 4 sets(all-2gb) of sticks during the known keyboard-mouse hell time:Quote:
Originally Posted by OldGuy
gskill f2-6400cl4d-2gbhk (4-4-3-5)
super talent t800ux2gc4 (4-4-3-8)
cellshock cs221440 pc8000 (4-4-4-12)
xtreem txdd1024m800hc4-d (4-4-4-12)
the xtreem pair was the last one on when the problems where resolved and i left them there.orthos blend yesterday night for about an hour ok, large fft's now 37 mins ok.
surprisingly the fp isn't so picky on memory as it's big brother.. and you maybe right saying that about love-hate relationships with the fp... you know you're always after the not-so easy broad...
edit: orthos stopped 46mins!!! hahahaha...
It would be nice to get that updated Bios. I have a few quirky things that happen with my machine from time to time. Any updates? They still haven't fixed / restored the forums over at ABIT. They seem totally useless right now with info from 2005.
Doesn't it seem a bit weird that ABIT support people are posting on other forums about the board and they don't have their OWN site working properly?
Mods and admins from Abit forums are posting all over the place because they have no control over what Abit-usa is doing right now...Quote:
Originally Posted by NeoRecon
And just what is it that they are doing? Anything?Quote:
Originally Posted by OldGuy
They could at least put a sticky on the old board informing us of what the hell is going on rather than leaving all of us hanging out to speculate.
I've got an ASUS Striker sitting in a shiny new box waiting for it's Thermaltake Mozart TX case to arrive tomorrow.
My watercooling gear just might move over into a new home.
I know, I know, the Striker isn't without it's own set of problems, as are most 680i boards out there, but I'm getting antsy. From what I see, it's all about the 680i, it's application in the MoBo, and the MoBo's manufacturer and support bios wise. I don't see the "quad" cores (2 dual cores) ever being able to OC as much as the Duo-Cores due to their higher power consumption and that the 2 duo's have some form of connection between them internally. Until Intel comes out with a true quad core, that will be the norm for OC'g with a Dual Duo-Core er uh "Quad" core. BUT put todays slightly OC'd "Quad" against a highly OC'd Duo and it will probably walk away from the Duo when multi tasking if all 4 cores are processing. Until they get their heads around this new tech it's all pretty much a crap shoot as to the success of how much one can OC their MB, Memory, CPU, GPU, 680i combination. Even a blind squirrel finds a nut once in while. :stick:
So now we have to create new account at the new(old) ABIT forums?
I already tried...never got email confirmation so I can't post even though it logs me in...everybody who was a member before this snafu looks to have access. Bloody joke...Quote:
Originally Posted by BKA
Finally had it with this board. Even with active 120mm cooling on the northbridge and Mosfets, I just burnt my finger on the SB heatsink.
Just ordered a BX2 from Mwave.
I use a HR-05 SLI on the SB. I know that once I cut up the pipe assy on my first board and stuck the shipping SB HS back on with AS5 it definitely got wicked hot...Quote:
Originally Posted by Spazilton
Is there any info on Abit? Is the forum ever gonna be fixed, will we ever get a final Bios, is Abit going out of business.... HELL YEA they are if the don't get there S*IT together!!!!!!!!
End of rant...................
Yes, I have access but what good is it when the database is screwed and nobody wants to post new topics that will just be deleted anyway?Quote:
Originally Posted by OldGuy
Anyone have success with 4x1GB sticks of RAM @ 1T?
Going to be trying out 4 x1 d9gmh (2 crucial pc8000, 2 buffalo pc8000, same micron though)
Vista really likes the 4GB runs nice now with 2x1gb pc6400c5 Corsair, 2x1gb pc8000 firestix @ 800mhz 5-5-5-10 (the promos on the corsair do not like 1T at all, have to wait for the crucials to get back from an RMA, had another stick go bad on me.)
just wondering if anyone had any tips on getting this going.
Thanks
we never did - abit-USA have always kindly provided the whole forum infrastructure but none of the Mods work for abit or have access to the servers.Quote:
Originally Posted by OldGuy
Also, those of us who were made Mods after 2005 don't have Mod access on the db that's currently running ... :shrug:
this is abit-USA only though - the global/ taiwan served sites seem to be running fine.
To the voulnteer mods over at Abit-usa forums, please don't take this as a direct insult. If you have contacts at Abit, let them know that we will not stand for this level of un-professionalism.Quote:
Originally Posted by Heidfirst
I am almost to the point of completly regretting my $340 purchase..
They have been told by myself and another Moderator. We now have a Marketing contact at abit-usa. We have informed him of the problems and he has assured us that they are working on restoring the forum. Apparently a massive power surge hit the building they are in and knocked out 3 of their 6 servers, and as luck would have it one of the three housed the Forums. They had a very recent backup of the forum but that server was knocked out as well. From what I understand both mirrored drives in the servers were damaged as well. They are working on recovering the data from those drives as we speak.
I also was given a copy of the new 1.1 Bios for the IN9 32X-Max, you can download it here.
www.lvcoyote.com/IN932XBIOS.zip
Ah....Maybe because no one knew until tonight??!! I just heard about what Lv said 5 minutes ago!:fact:Quote:
Originally Posted by DukeMaster
Oh, and I posted about the situation up to now yesterday.
http://www.xtremesystems.org/forums/...&postcount=828
Who's Heidfirst??? Oh I know...:D
:woot: Ok all go play now.:cool:Quote:
Originally Posted by Lvcoyote
Quote:
Originally Posted by Lvcoyote
Thanks, Appreciate you going to bat for us and getting this.
What I can report so far is the keyboard/mouse problem has not been fixed, still must be set to OS, so I still have to keep a PS2 keyboard around (which blows goats!)
ALSO IF YOU DO NOT SAVE WITH THE F10 COMMAND IN THE BIOS uGURU IN THE BIOS GETS REALLY SCREWY!
I do not have time for any serious overclocking right now, but I passed a 30 minute OCCT with the same settings as I had before. When I have a bit more time, I will delve deeper.
Good luck folks, let us know what you find with this bios.
Sorry, the F10 thing was addressed in the flashing instruction provided me as well......
1.Prepare a Bootable Floppy Disk
2.Please copy the M622A_11.Bin and AWDFLASH.EXE files to the floppy disk.
3.Restart the PC while put the disk in the Floppy.
4.During the DOS mode, Type the comment awdflash(space)M622A_11.Bin(space)/py/sn/cc/cd/cp/cks/r¡¨
5.After finish the update BIOS, the PC will restart automatically. Please press Del button to get in the BIOS and load Load Optimized Default" for running the OS.
6.Then Press F10 button for saving and exiting.
Yeah, now you tell me to read the readme, lol
seems weird for a final release that you have to save using the F10 command.
Does not make me to confident of the bios, but only time will tell, and some tweaking...
I did not get a list of addressed issues along with this BIOS. I would assume that this new BIOS will be posted at the abit ftp Taiwan site tomorrow or the next day, and there should be a text file included with a list of fixes.
And I shouldnt have to tell you to read the readme.... LMAO!!!!
your namesake ... :slap:Quote:
Originally Posted by maxwedge
I used the awardflash menu to flash the bios, do the commands you listed do something more than a standard flash? Such as reflashing the boot block? I will go back and flash using the script if it does, and if it is necessary for this bios.Quote:
Originally Posted by Lvcoyote
No, you should be fine....
Thanks for the bios Lv! good coyote!! good coyote!!:D
seems quackdogs like coyotes!!:toast:
Thanks for the bios.
Can't I flash bios without a floppy?
PRJ
Get a room! ;)Quote:
Originally Posted by OKsoVRomoSkylo
BIOS ID:11
1. Update NVMM to 4.64.14
2. Support DRAM tRFC adjusting function.
3. S3 function now works as intended without problems.
4. Support CPU multiplier adjusting function for Intel Extreme Edition processors.
5. BIOS compiled date: 2/13/2007
abit just released the new bios here:http://www2.abit.com.tw/page/en/moth...pPRODINFO=BIOS
@chosen: hahaha! definitely need one with a bath!!:D
I also have the IN9-32X Max and found that I could lower the multiplier. While experimenting I lowered it to 6 from 9 and the uguru raise my FSB to 400mhz. Got into windows, few seconds later bsod. Everything is fine now, but would that harm the board?
Thanks.
Quote:
Originally Posted by OKsoVRomoSkylo
link not work
________
Oregon Medical Marijuana Dispensary
just checked... ok for me..Quote:
Originally Posted by billdavis
try finding it here: http://www2.abit.com.tw/page/en/index.php
Quote:
Originally Posted by linflas
Why do you find that weird??? Surely if your gonna change something in the BIOS you'd want to save those changes?
Quote:
Originally Posted by billdavis
Alternate Hosting.
Please don't abuse it, its on my personal webspace.
http://www.swva.net/jehamilt/IN932XBIOS.ZIP
Thanks for sharing, the other sites don't work for me, thanksQuote:
Originally Posted by Spazilton
bye
Because Johnny Bravo, You HAVE to use the F10 command, if you go to the "save and exit" part of the bios and try to leave, uGURU in the bios gets all screwy, that is why.Quote:
Originally Posted by Johnny Bravo
Granted, but then again it does say so in the BIOS file :)Quote:
Originally Posted by linflas
Please help me....
everytime i want to restart my PC with IN9 board, i need to change fsb (also a little change 5/6 mhz more or less) in bios or the system restart continuoslyin the first Windows screen ...
I tried each beta bios and also 1.1 final but the problem is not solved :(
What do you think???
I have OCZ Flexx ram.
Thank you
LOL, they resetted the Abit Forum database again and still no official information what's going on...
Their information policy suxx, they really must have internal problems...
Well they now have the correct and current one back up..........for now :clap: Let's see how long this lasts...Quote:
Originally Posted by aehmkei
Actually considering what happened to the server that housed the forum, they did a pretty damn good job getting it back online with all the information saved.
Yea, I had no troubling logging in. Hopefully they continue to improve.
I'm on my way to Taipai, Taiwan tonight, does anyone know if Abit has any kind of office, showroom, etc. location that can be visited? I can't read the Taiwan website.
Ill try to come back with some "top secret" info about the IN9 .... :rolleyes:
You probably wont even make it to the parking lot..... LOL
lolQuote:
Originally Posted by Lvcoyote
Any news on how well this new bios is performing... Cant test it out atm as my rig is in pieces while i sort out my new waterloop. Hope to be back up and running by the end of the week so i can give it a go myself :)