my cpu is same as ur, i got 3,2 stable with 1.38 vcore u should try, cuz 1.45 seems to be a lil muchQuote:
Originally Posted by nemowish
P.S= now i got it at 3ghz with 1.3 vcore no worth of high volt and some speed, atlast if u dont bench:)
Printable View
my cpu is same as ur, i got 3,2 stable with 1.38 vcore u should try, cuz 1.45 seems to be a lil muchQuote:
Originally Posted by nemowish
P.S= now i got it at 3ghz with 1.3 vcore no worth of high volt and some speed, atlast if u dont bench:)
hmm i think i got some freeze with 1.4v at 3.2 when i was running prime, ill try again and see what will happen
Hi All...
Spec :
Q6600 G0 (dont remember batch) sunbeam tuniq tower 120 (fan sytche 1900RPM 110 CFM )
Asus P5K-E/ap-solo
Gskill Pc2-6400 4-4-3-5
e-vga 8800GTX
this is my results with 3.4 :
http://i27.tinypic.com/sonvut.jpg
http://i30.tinypic.com/etgqvs.jpghttp://i32.tinypic.com/1zv3atd.jpghttp://i31.tinypic.com/24zly79.jpg
NB -1.40
SB - 1.20
Vpll - 1.60
Vfsb - 1.30
Vdimm - 2.2
VID - 1.2625V
what do you think?
...Just skip right over me...
You can delete your own posts you know...Quote:
Originally Posted by Waymon3X6
I managed to buy a 737B011 off ebay, will update with overclock results when I get it... Hopefully it will overclock like the rest around this batch :) I hope so at least, because it was kind of expensive...
How much did you get that 737 for?Quote:
Originally Posted by scottc19
$276 shipped, because it was in Canada and I'm in the states :(Quote:
Originally Posted by Ymir
Still, it's not a terrible price, and you should get some great results with it :up:Quote:
Originally Posted by scottc19
update:
some of the first OC benchies on my Q6600
L740B269 @ 3.8GHz (423x9) 1.36v load - VID 1.225v
http://img99.imageshack.us/img99/8679/oc3800dm6.png
:up:
Hope it does better than 12mn Prime95 ;)Quote:
Originally Posted by Prelim
But looks like a nice chip. We have quiet near batches. Mine does quiet same performance with a 3.6GHz rock solid at 1.33v, but I need 1.43 to be rock solid at 3.8Ghz even if it SuperPi at only 1.35v at 3.8GHz. Also, those batches run hot. I see you're already at 60°C after just 12mn of Prime 95 (small FFT I guess!). You'll get much hotter when you increase volts to be stable and after 1h of Prime95 small FFT
Figured I would add in my Q6600 G0 here.
Motherboard - Abit IX38 Quad GT
CPU - Intel C2Q Q6600 G0 2.4GHz@3.3GHz 1.2625VID 1.325 VCore in BIOS
HS/F - Zalman CNPS9700NT
Memory - Corsair XMS2 2GB 4-4-4-12
PSU - Thermaltake W0106RU 700W Modular
Case - Cooler Master Mystique RC-632S
DVD/CD - Asus DRW-2014L1T
GPU - XFX GeForce 8800GT(G92) 512MB
Floppy - Samsung Floppy
Hard Drive - Seagate Barracuda 7200.10 250GB
http://img159.imageshack.us/img159/1...5stablemo3.gif
How are you guys getting stable 4+Ghz benches??? What are the volts that you're giving to that thing? Is it 3Dmark06 stable?
3DMark06 stable is easy. I can 3DMark06 up to 4.3ghz.Quote:
Originally Posted by Waymon3X6
Could you please include the batch number?Quote:
Originally Posted by AresOlSkool
Yea I can do that, just gotta pull the cpu fan out as it was OEM so I don't have the box.Quote:
Originally Posted by scottc19
Which of these cores do you guys reckon belongs to either respective Die;
http://img.photobucket.com/albums/v3...Difference.jpg
C1 + C4 = 1 Die ?
C2 + C3 = 1 Die ?
:shrug:
Rock stable, and I didn't try to lower the voltage yet... I'm sure it will run as good on 1.260V-1.265V..
I've also tested 3750 and it looks stable at 1.3V
http://sesion.active-servers.com/sesion/rock_stable.jpg
Wow! VID 1.20V - which batch is that?
Mine has VID 1.3V, it takes 1.43V to prime stable at 3.6Ghz :(
How can I get one with VID 1.2~1.22? Any batch in particular?
@ Sesion
Thats an amazing Vid you have there, I need 1.4V core for prime stable (450x8) with 1.25V Vid
I get 65C loaded all cores, where you get 60C loaded all cores in prime so not too jelous :D
Normally I get 56-58C, just the test was done at night where my bed does block the airflow (The front fan doesn't have any space to take cold air in)Quote:
Originally Posted by Psycho_eddie
What batch sesion? Those temps seem pretty high, I'm guessing high ambient temp, right?
Hey, that's only 15mn Prime95. Before saying its stable or cool, give it 1-2h or more first.Quote:
Originally Posted by sesion
Mine would Prime few mn no problem at 1.28v too, but needs 1.33v for 3.6GHz. So, just post more serious benching
Yo dude if you actually look :shakes: ..... you will see he started at 1.30Am and finished 11.47AM i can see where you went wrong. But 11 Hour prime stable 3.6Ghz @ 1.28V is impressive to say the leastQuote:
Originally Posted by jonny_ftm
That's over 10 hours and not 15 minutes... :)Quote:
Originally Posted by jonny_ftm
As for the batch I'd need to remove TRUE to check... so not now :P