Printable View
I know how much you guys love VID info so I finally added that back to the main page of RealTemp like the good old days.
It's real time VID so that can change depending on power and bios settings between idle and full load.
http://img33.imageshack.us/img33/6397/realtempvid.png
http://www.fileden.com/files/2008/3/...alTempBeta.zip
There's an option in the Settings window to show the timer instead but I agree, VID is nice for screen shots.
Hoss: I booted using 250A PL8 1.36v mch 1200mhz 1.9v bios failed Prime blend instantly, went up to 1.44v mch in et6 and is holding so far. Looks like the board doesn't under volt much like my Rev1.0 board. Could not get it to boot at any voltage using 240b. will keep trying.
http://img33.imageshack.us/img33/238...s18everest.jpg
unclewebb, will try that for sure, nice feature. :up: Thanks.
I don't believe that it is a problem with the settings for the memory.
Ran 4 threads of MemTest with no errors up over 200% now.
Screenshot:
http://img12.imageshack.us/img12/8493/63137122.gif
Mines a rev 1.0 board also but im not sure if its a board or bios issue undervolting. Did your everest vdimm change at all with the 1.92 setting? Mine takes 1.38-1.40 mch for 2.50A 1200 on PL8.
I havent set to 1.92 yet, will try that tonight after this Prime run. A little out of sync but passing.Quote:
Originally Posted by Hoss331
EDIT: tried setting 1.92vdimm in ET6 and it reverts back to 1.90v. Had to go up to 1.94v for it to change, and then in Everest it reads 1.92v.
http://img40.imageshack.us/img40/129...200mem250a.jpg
TooFastForYa: I dont know of anyone that has run 200dPL8 but maybe I am wrong. I have to use Pl9 for 200d or it will not pass.
So what latch frequency and memory multiplier is recommended for 450x9?
hello~ i am a newbie, just got a q9650 with rampage formula
but there is a problem, i have 4hdd where 3hdd have vista in it
so i found that if i need to boot correctly, i must disable the 2 hdd drive in the boot drive selection
otherwise i get nothing showed when i power on the computer
now the problem is, when i try to overclock, no matter whats the setting is, i can boot after the first time modification but not the second time
like sometime i can boot up with 467*9 and i want to set the voltage lower so i enter the bios again, when i set the voltage lower i cant boot up
so i thought maybe the voltage is not enough, then i clear cmos and re-do the above thing, on the second modification, i change nothing in the bios
but it just cant boot up, so whats the problem?
i even tried disabling the other sata drives except my main hdd, putting 1.42v for vcore, 1.45 for nb etc
so i thing the voltage should be enough, i just cant figure out why the bios only boot once
thanks
also is there some example of q9650 with a rampage formula?
i just know how to set vcore, nb v, pll and vtt, want to learn more
thanks
Finally got past 5 test of IBT on max @ 450x9.
All my settings shown in the screenshot. Any recommendations for 475x9?
http://img189.imageshack.us/img189/4819/64351125.gif
i could run pl8 at 200D up to 520fsb but only using cas 4.no boot at cas 5 pl8
I would run 600MHz too but EVP is only 1.85 and my 9200 blades also need about 1.9v for 600MHz so I'm not sure about it...Quote:
Originally Posted by OC Nub
all air cooled @ 75F
q9650 @ 4.6ghz/thermalright fx14/ep45-extreme/285 @ 756/1620/1300 stock cooling
new 1.2/2.2
http://img505.imageshack.us/img505/1430/trop1024.jpg
http://img390.imageshack.us/img390/4922/trop1280.jpg
http://img505.imageshack.us/img505/2326/sanc1024.jpg
http://img390.imageshack.us/img390/7628/sanc1280.jpg
Which game/demo is that Napalmv5, see you got ya 2GB vidcard :)
Unigine new versions LeegQuote:
Originally Posted by Leeghoofd
Cheers :up:
Sergio
Yes nice scores! Napalm was bitten by nvidia? How odd...
I've jumped onto the TRUE bandwagon guys - a good 15C cooler than my Zalman 9700. Epic win. :up:
I posted a thread here in the Air Cooling subforum demonstrating the lapping and installation of my new toy, and finishing with a comparison between the Zalman and the TRUE.
http://i293.photobucket.com/albums/m...300p95TRUE.png
Told ya Lenny its an awesome cooler :up:Quote:
Originally Posted by LennyRhys
Some benchs with the Q9650 at 4662 and the GTX285 at 765/1800/3000 on water
Unigine Sanctuary new version 2.2
http://img136.imageshack.us/img136/6...e2complete.jpg
http://img233.imageshack.us/img233/6...e3complete.jpg
Cheers :up:
Sergio
Great score Sergio!!:up:
Thank you mate :up:Quote:
Originally Posted by OC Nub
Cheers
Sergio
OK so I thought I was making good progress, getting 1 hour of Prime blend at 4.3GHz. I've not changed a single setting and now when I prime I get a fail on core 4 within a few seconds.
Could it be corruption in the OS that is responsible for the failure? :shrug: I was going to leave prime running overnight.
Lenny thats the way MF2 works one day stable the other day not...at least for me an others on quads...Quote:
Originally Posted by LennyRhys
i had it for 1 month tested every day and get pissed and to blend i had to pray the lord...thats why i switched to UD3P
please dont take this bad i had it and i know that it was the mobo and here in my country and ppl at the forum same problem with quads.
Cheers
Sergio
so its like that huh sergio.. air vs water ?Quote:
Originally Posted by andressergio
fine.. air cooled 4.8ghz/dq6/higher 285 clocks cometh!! :D
dont get me wrong.. great clocks/scores! :toast:
http://i26.tinypic.com/vovbxh.jpg
Only gained 1 FPS after changing from 3GHz to 4.8GHz.:(
The once the DX11 cards are released this 9800 GTX is getting a one way ticket to the closet.
:D All Friends In Here Have Giga P45 Board For Quad :D No One DFI P45 Board?
I Tired OC My Quad In This Board :( It's Not Go Over 505FSB
Maybe Change With Giga P45 Mobo