XS Yonah T2600ES competition !!!

Wow Tyrou, that's the highest FSB I've ever seen on a Yonah..

Anyone know if there is something similiar to Clockgen for overclocking this CPU on a 945 chipset/Laptop? Clockgen doesn't work on my Acer laptop, and i would like to see what this things got :p:

congrats:toast:
Think you take 05 now with some good x1900
you have the same power as a FX60 @3900:banana: :banana:

Quote:

---

Originally Posted by G H Z

Much better Stephen :)

Does anybody know how the board maker flashes the BIOS on these soldered on chips? Seem to me there must be a way after the chip is in place for a corrupt BIOS problem.

---

I think my bios is corrupted too.
It hangs on Aopen Bootlogo and nothing happens.
Sometimes it hangs on Building DMI Data, but still no boot.

If i cant get it to work, i desolder it and try to flasch it.

Damn it, modded board but still stuck at 231 under vapo. Will try dice, might be one of the worst step 4 cpus :(

vcore: 1.5V-1.63
vdimm: 2-2.3V
pci-e: 100-125

Sell it and get another kiwi :)

cal930

Very Very Goood :toast:

http://cal930.sakura.ne.jp/cgi-bin/c...00ES_15969.png

:woot:

I need to mod my board and put it under DICE...:D

Congrats: :clap:

Do you have some more details (cooling, RAM)?

just guessing, but I'd say DI and Corsair 5400Pro C4 @ 4-3-2-2 :D

Quote:

---

Originally Posted by boblemagnifique

cal930

Very Very Goood :toast:

---

How close can you get :D

Quote:

---

Originally Posted by Bennah

How close can you get :D

---

Ask Kyosen ;)
0,001sec after no1 earlier in this thread :p: :D

Quote:

---

Originally Posted by M.Beier

Ask Kyosen ;)
0,001sec after no1 earlier in this thread :p: :D

---

Japan vs. France :D :toast:

By OMEGA

New modPI 1.5 XS 8M WR on April 29/06

3m05.375s @3708.7MHz (FSB285.3MHz x 13)
http://premium1.uploadit.org/fredyam...s-by-OMEGA.jpg

Wow :slobber:

How many is there of you? :D :cool:

Seems that someone is always breaking a WR from you guys.

Would'nt try and think what Conroe is going to do when you lot get your hands on some :D :slobber:

Quote:

---

Originally Posted by boblemagnifique

cal930

Very Very Goood :toast:

---

Here are his complete specs:

M/B: AOpen i975Xa-YDG
CPU: T2600ES
CPU Cooling:LN2
Memory: TeamXtreemPC2-6400(DDR2-800)1GB×2
VGA: X800GTO
HDD: S-ATA　WD1500ADFD
Power Supply: Zippy-500GE(3.3VMOD)
Vcore: 1.63V, Vdimm: 2.72V
OS: Windows Server 2003
MEM: 4-3-2-4 3:5
Vio:3.78

aopen guys, im in despair! ever since i got the mobo, ive been getting the CRC failure/error or file corruption error, sometimes i can install windows and the errors occur after. sometimes during winxp installation when the copying of files (right after the hdd format) reach 90-92%, even thats not consistent. i can run 3dmark all day long if im able to install it. i can run the 'burn in' sysoft sandra @ full load, cpu is stable. i can move large files across hard drives non-stop. the CRC errors occur when i try to install nero for ex. or any other large .exe, small applications dont seem to be affected

3 hard drives, same errors
3 controllers, same errors
multi combo of the hard drives/controllers, same errors
hard drives + controllers work fine no issues watsoever

no matter what cpu clock/voltage

Yonah T2600
Aopen i975xa-ydg - duh!
GSkill DDRII800 2GBHZ
Sapphire x1900xtx
Creative X-fi
FSP 700-watt PSU
WinXP

have been battling this 2+ weeks.. im exhausted.. nothing else i can do.. anything u guys can do before i rma?

Quote:

---

Originally Posted by NapalmV5

aopen guys, im in despair! ever since i got the mobo, ive been getting the CRC failure/error or file corruption error, sometimes i can install windows and the errors occur after. sometimes during winxp installation when the copying of files (right after the hdd format) reach 90-92%, even thats not consistent. i can run 3dmark all day long if im able to install it. i can run the 'burn in' sysoft sandra @ full load, cpu is stable. i can move large files across hard drives non-stop. the CRC errors occur when i try to install nero for ex. or any other large .exe, small applications dont seem to be affected

3 hard drives, same errors
3 controllers, same errors
multi combo of the hard drives/controllers, same errors
hard drives + controllers work fine no issues watsoever

no matter what cpu clock/voltage

Yonah T2600
Aopen i975xa-ydg - duh!
GSkill DDRII800 2GBHZ
Sapphire x1900xtx
Creative X-fi
FSP 700-watt PSU
WinXP

have been battling this 2+ weeks.. im exhausted.. nothing else i can do.. anything u guys can do before i rma?

---

Hmm I have had simialar probs and I went crazy and checked everything 1k times. And it was my sata cable the whole time.

Quote:

---

Originally Posted by njkid32

Hmm I have had simialar probs and I went crazy and checked everything 1k times. And it was my sata cable the whole time.

---

dat must have been quite a relief.. :)

no such luck here.. :(

Bios? 1.03 or later?

BTW, where can I get beta bios after 1.03?

Congrats to insane clocks Tyrou!!! wow !

Lost my Stepping 8 CPU unfortunately to at least give you a race - and have to work on a stepping 4 for now:

http://img463.imageshack.us/img463/4954/168b1xu.jpg

At least I have the crown for the step 4 :rolleyes:

http://valid.x86-secret.com/show_oc?id=91321

EDIT: Cooling was Single Stage LN2 did not help any for more clocks

by far the best I saw so far for a stepping 4

congrats and a virtual
:toast: @cocanut grove

@kiwi:

1.01 - 1.03 @ AOpen

1.03b: *here* or *here*

second link is down, stummerwinter ;)

*fixed*

should work now...;)

What is of what are the difference with the bios files?

1.03 <=> 1.03b ?