pity for my chip, not the best. To go back often takes several volts :( http://valid.canardpc.com/show_oc.php?id=878719 2.72v..
Printable View
pity for my chip, not the best. To go back often takes several volts :( http://valid.canardpc.com/show_oc.php?id=878719 2.72v..
@ User111
try 2:3 multiplier
Me teams have increasment about 5mhz @ CAS3 comparing to 1:1 or 4:5
5MHz to do nothing more, I am already so great a success like that, even if the absurd vDIMM. I tried to get them in CAS 4-4-4-12 but I could not break through the wall of 610MHz even with other overvolt
http://valid.canardpc.com/show_oc.php?id=880067
and KHX 1200 - D9GKX 6WD22
however, PCB is a no name :/ looks like a HJ-M1, but it's 6-layers
@ 2.44V (real) 900MHz 3-3-3-8
http://img19.imageshack.us/img19/4961/khx90048.th.jpg
yes :yepp: 628Mhz some ideas to lower the voltage? I was advised to raise the northbridge voltage from 1.24 to 1.40 (well above the specifications of Intel talking up to 1.25V to P45)
http://valid.canardpc.com/show_oc.php?id=886562
Kingston HyperX 1200MHz @ D9GKX 6WD22
513MHz @ 3-3-3-8 @ 3.05V :D
I've used up to 1.50V on P45 if I recall correctly, didn't do any harm from what I can tell but I wasn't feeling comfortable with it at all.... :rolleyes:Quote:
Originally Posted by User111
Don't kill them! ;)Quote:
Originally Posted by JULO
I have low budget and I have to choose beetween
1 gig of this HyperX and a
2x1GB kit of Cellshock 1000 CAS4 straight from RMA
I'm thinking about this for 2 day and still can't decide ;)
what would you choose?
nice results first, with 3Volts, they were warmed up :D:D:D:D i wouls choose the cellshocks, they clock really really goo, especially with low latencies, i have one 1000 cl5 GKX kit, and they did 1200 C4 2,6V 32m stable :D:D:D:D
thanx ;)
mine CAS5 1000 achieved very similiar results
However, this KHX does 1200 @ 4-4-4-12 @ 2.42V DOS memtest stable :D
my last crucial 2x1gb ballistix did cas4 1000 2.25v for 6months then on a hot day they took a huge dump now i have single sided crap again
You are a fool :DQuote:
Originally Posted by JULO
That's what I managed to do between yesterday night and this afternoon 1300MHz 5-5-5-15 2.28v stable http://img43.imageshack.us/img43/329/130055515.jpg
vDIMM not the least, so I can still get :up:
Always my Dominator PC9136 D9GMH's and P5N-E :cool:
410Mhz 3/3/3/9 @2.51v bios
http://img13.imageshack.us/img13/1417/everesti.jpg
I have seen a beautiful 425Mhz-11300 Mb/s but it was above capacities of my P5N :D
Also 661Mhz 5/5/5/15 @2.42v bios :
http://img31.imageshack.us/img31/2572/ramc5.jpg
@Cpmf
621mhz @ 4-3-3 2,42V sounded a lot better :D
I just bought several D9 kits off of ebay. :cool:
Kingston HyperX PC2-9600 D9GKX 2X1GB $64.00
Buffalo Firestix PC2-8000 D9GKX 2x1 512mb $26.00
G.Skill HZ Series PC2-6400 D9GMH 2x1GB $32.00
Corsair Dominators PC2-8888 D9GMH 2x1GB $49.00
Crucial Ballistix PC2-8000 D9GMH 2x1GB $37.00
I am snowed in the "Blizzard of 2009" in the Northeast. Should be some fun testing.:D
:shocked::shocked::shocked::shocked::shocked:Quote:
Originally Posted by chad
Corsair Dominator 8888 foor only 49$ :shocked::shocked::shocked::shocked:
if you want to sale them please pm me :D
The Cell Shock memory is some Good stuff i have a friend that has some.
@chad
which stepping is your KHX?
mine 6WD22 is a really good piece of die ;D
and try to push up ballistix ;)
CpmF
Very nice job :up:
Everytime I see that someone got a good deal on a Corsair 8888C4DF kit, and I get jealous, I have to remind myself that I have a rather neglected Geil DDR2-1160 C4 kit :D
hey shiranui, what abou t yoour team xtreem 1300 kit ? any results there ?
The Team 1300 kit is crap. One of the sticks is clearly degraded.
i too got a team xtreem 1300 kit from foxkitos. i havent been pushing them much voltage wise but so far best results are 1110 4-4-4-12 2.3v, 1066 4-4-4-12 2.2v, 1280 5-5-5-15 2.35v, 1170 5-5-5-15 2.2v more info here:
http://www.xtremesystems.org/forums/...d.php?t=241364
Cas3 & 2.51v bios :up:
http://img685.imageshack.us/img685/3943/spic3.jpg
Seems to be nice :D