"ASUS P5Q Deluxe discussion".

Printable View

Show 100 post(s) from this thread on one page

07-30-2008, 03:07 AM
gurusan

I use LLC to lower my idle voltage a bit. 1.424v idle and 1.432v load

Are you saying this is bad for some reason?
07-30-2008, 03:24 AM
PortCitySlim

I use LLC on auto, so far I can not tell a difference at all between auto and enabled, maybe because they are the same thing, but one time I did have my system BSOD when switching to enabled. Since then I have just left it on auto.
07-30-2008, 03:48 AM
Martin.v.r

Water cooling on cpu
ASUS P5Q Delux bios 0803
E8400
Cellshock PC8000 CL4
no boot on multip..x6 x7 is ok 590x7 fsb vcore 1.3850
bios set is 1.400v - vdrop it is 0.2500v in all vcore set.
PL 1.56v
FSB 1.36V
NB1,45V
MEM 5-5-5-15 2T 2.3V
STRAMP 400

Ned help to hit 600+ fsb
07-30-2008, 03:49 AM
Darkmaster

Hi guys, i've got some thinks to ask you :)
I'm going to buy a new P5Q motherboard but i don't know what model can I take. Which model do you suggest between P5Q DLX and P5Q WS? I don't know if P5Q WS is good for overclocking.. That is my doubt.

Thank you very much :)
07-30-2008, 05:34 AM
CERO

how much does the DIMM overvolts, also 0.08v like on the maximus/rampage?
07-30-2008, 05:42 AM
-n7-

Quote:

Originally Posted by CERO

how much does the DIMM overvolts, also 0.08v like on the maximus/rampage?

Yes.

HWC just reviewed the P5Q Pro; it's 0.08v higher also.

Seems all the P5Qs overvolt the vDIMM by 0.08v for each value.

As well, bigtime overvolts on vFSB/vPLL unless you set it a couple notches over the lowest voltage; then it sets it close to its set value.
07-30-2008, 06:17 AM
Gr1mR34p3r

Quote:

Originally Posted by Timbosan

Here's where I'm at at the moment, my 24/7 settings.

Very nice, best I can do is PL12, 1.24V FSB, 1.28V NB.
07-30-2008, 07:17 AM
Wolf132

1 Attachment(s)

Heres a SS of my q6600 on a p5q-d. Just got it yesterday though.
07-30-2008, 09:14 AM
truehighroller

I miss mine :( . I can't wait for newegg to over night the new one back to me. That is going to be a sweet day. They just recieved it today. I have been gaming on my Rig#2 since it crapped out on me and actually Rig#2 games almost just as good IMO.
07-30-2008, 09:59 AM
Pntgrd

you can add me to the list of Impressed P5Q-D owners. Got the board installed Monday night. Had a wee bit of time to play with it last night and without hardly any effort at all am running at 8 x 500 for 4ghz. And this is with none of the voltages in the yellow. I can see that I am going to like this board :up:
07-30-2008, 10:05 AM
bluedoo

Quote:

Originally Posted by Pntgrd

you can add me to the list of Impressed P5Q-D owners. Got the board installed Monday night. Had a wee bit of time to play with it last night and without hardly any effort at all am running at 8 x 500 for 4ghz. And this is with none of the voltages in the yellow. I can see that I am going to like this board :up:

i have bought this board and also an E8400
i was planning on using my cpu cooler which is a Arctic Cooling Freezer 7 Pro
but have heard they have problems fitting
should i try to fit it or buy another cooler?
07-30-2008, 10:56 AM
Polizei

Why not try and fit it before you spend more money?
07-30-2008, 11:22 AM
Shekers

Quote:

Originally Posted by CERO

how much does the DIMM overvolts, also 0.08v like on the maximus/rampage?

My DIMM overvolts close to 0.2v!! Setting of 2.2v in bios gives 2.4!
07-30-2008, 11:24 AM
bluedoo

i will give it a try
i am fitting it probably saturday
i have seen someone fitting it and they had to bend the 3 lower fins down and cut the corner off of the fan bracket to get it to fit

if i cant get it to fit very well any recommendations for another one?

thanks
07-30-2008, 01:32 PM
TI66ER

The ac7 pro fits on my p5q-e fine,though you do have to bend the lower couple of fins a bit down.
07-30-2008, 01:36 PM
bluedoo

i will try it
saves a bit of cash :)
07-30-2008, 01:37 PM
truehighroller

Quote:

Originally Posted by bluedoo

i will give it a try
i am fitting it probably saturday
i have seen someone fitting it and they had to bend the 3 lower fins down and cut the corner off of the fan bracket to get it to fit

if i cant get it to fit very well any recommendations for another one?

thanks

Get a Thermalright 120 Extreme, I don't have to bend any fins.
07-30-2008, 04:03 PM
truehighroller

Newegg approved my rma already!! It should be on it's way back to me tomorrow latest. Everyone gather and pray to the newegg gods that they shine down on me tonight and ship it tonight lol.
07-30-2008, 11:55 PM
NaMcO

After 2 week holidays and some heavy testing on my board, here are my settings which are 100% stable on Prime95, OCCT, 3DMark and loads of gaming. P5Q Deluxe; E8400; 4x1GB Team XTreem Dark; 9800GX2:

http://www.allsinclair.com/gfx/bios1.jpg

http://www.allsinclair.com/gfx/bios2.jpg

http://www.allsinclair.com/gfx/bios3.jpg

Hope they're useful :D

Thanks to everyone who helped, specially Leeghoofd.
07-31-2008, 01:12 AM
JHS

Quote:

Originally Posted by NaMcO

After 2 week holidays and some heavy testing on my board, here are my settings which are 100% stable on Prime95, OCCT, 3DMark and loads of gaming. P5Q Deluxe; E8400; 4x1GB Team XTreem Dark; 9800GX2:

http://www.allsinclair.com/gfx/bios3.jpg

Hope they're useful :D

Thanks to everyone who helped, specially Leeghoofd.

Your CPU voltage is quite high for 450 fsb in my opinion.

My E8400 runs stable @ 1.25000. Of course each cpu is unique but still that voltage looks quite high for just 450 fsb for 45nm processor. U should be hitting maybe like 500 fsb wih those voltages :)

EDIT: Also I think you should try to play with performance level manually. I think PL 9 or 8 should work easily

EDIT2: But just a suggestion. If it ain't broken, don't try to fix it :D
But there is always room for some improvements if you willing to spend some more time :)
Then again if you happy with it then just enjoy. Nice OC either way :)
07-31-2008, 01:48 AM
PortCitySlim

Hey guys, I am working on tweaking my memory. I want to have the best performance possible and am not sure what settings I should be using. Right now I am stable at 1133mhz with

Timings: 5-5-5-15 trfc 55
RAM Voltage: 1.94
DRAM Static Read Control: Enabled
DRAM Read Training: Auto
Mem OC Charger: Enabled
AI Clock Twister: Auto
AI Transaction Booster: Auto

I was also stable at 1.9v with Static Read Control disabled and everything else on atuo. I heard that enabling read control and mem oc charger helped boost perfomance. I tried setting AI Clock twister to Strong and that failed, what should I be doing here with the clock twister, transaction booster and read training??? Thanks
07-31-2008, 03:13 AM
truehighroller

Quote:

Originally Posted by Timbosan

Core temp wont detect my actual multiplier and FSB. Both version 0.99 beta and 0.99.1 incorrectly display it. I have seen some people's screenies that show coretemp and it is correctly displaying their MP and FSB. Don't know why it's happening but it's annoying me.

Anyone know what the GTL ref values are set to when using auto? If they are maxed out on auto then I doubt there is any reason to play with them. From what I have read the higher the value the higher the FSB achievable. If they are maxed out, this means all we have to play with is VTT (vFSB) and that's a pretty coarse way of tuning.

If you max it out you won't have a chip for very long..
07-31-2008, 03:53 AM
RBS

Hi, what about the problem with GTX260/280 and those condensers? My mobo is revision 1.03G, anyone has this one with nvidia GTX 260/280? I´d like to conclude about which revisions are affected. Regards
07-31-2008, 04:45 AM
Leeghoofd

Quote:

Originally Posted by RBS

Hi, what about the problem with GTX260/280 and those condensers? My mobo is revision 1.03G, anyone has this one with nvidia GTX 260/280? I´d like to conclude about which revisions are affected. Regards

Think it was early boards that were affected, they are all 1.03G revs... mine had 0506 bios on it and I could mount the GTX280 without an issue... maybe boards like BigJoe's, that one had 0302 bios on it, were the affected types...

Quote:

Originally Posted by PortCitySlim

Timings: 5-5-5-15 trfc 55
RAM Voltage: 1.94
DRAM Static Read Control: Enabled
DRAM Read Training: Auto
Mem OC Charger: Enabled --> this features enhances OC'ability
AI Clock Twister: Auto--> try moderate, if it passes okay if not light
AI Transaction Booster: Auto --> Try PL10 first then go lower step by step

I was also stable at 1.9v with Static Read Control disabled and everything else on atuo. I heard that enabling read control and mem oc charger helped boost perfomance. I tried setting AI Clock twister to Strong and that failed, what should I be doing here with the clock twister, transaction booster and read training??? Thanks

look above... hope you can make PL8...

Quote:

Originally Posted by Timbosan

@ namco - try to drop your vNB voltage, you shouldn't need 1.28v for those settings. I'm Orthos/OCCT etc stable at PL10, 333 strap and 534 FSB with only 1.2v vNB.

Remember he has 4 dimms , you have 2 (unless ya sig is incorrect), less stress on NB, with 2 x 2Gb dimms with 450FSB and 1081mhz I need 1.26 to be stable with them... and each board is different, so we can give guidelines but it's pretty hard to specify exact settings...
07-31-2008, 04:50 AM
Polizei

Is there anything I should do on first boot? My board is arriving tomorrow and I don't want to hurt my already abused E6600 any more.

I'm going to format and re-setup my RAID arrays even though I can just transfer them over... it's been a long time coming. Just need something where I can set those up again. I don't want to use that "quick" RAID stuff, I want to use ICH10R. Do I need a floppy drive?

Show 100 post(s) from this thread on one page