Printable View
LOL....cuz I don't have my autocascade atm.Quote:
Originally Posted by G H Z
Have you done the "cold-boot" mod to the board? I can't enter bios when then mobo temp is below 0. It basically gives me a blue line on the bottom with a cursor on the top left corner. If I boot in positive temps, I can enter bios......
No mods yet, need to try my other board I guess. You did the Tcore mod for cold boot already, doesn't it work on your board?
Same hereQuote:
Originally Posted by s7e9h3n
Does your mod work? What resistor is that?
http://img359.imageshack.us/img359/7374/tcore3ys.jpg
Thats nice QKHK there Tyrou:toast:Quote:
Originally Posted by Tyrou
Mine stuck @250ish:(
http://img163.imageshack.us/img163/5...shot0933sa.jpg
I'm not sure exactly what the tcore mod is supposed to accomplish :p: I have no problems booting into windows, but I can't get into bios when sub-zero. The T-core mod allows me to adjust cpu temps ~30C while in bios, but I think I may need a different value pot as this may not be enough to "fool" the mobo into thinking temps are positive ;)Quote:
Originally Posted by G H Z
Wow Dumo, now I know there was something wrong with my Yonah 05 run, that beats mine by over 1K and I ran 922/900 XTX with 3.2Ghz :slapass:
*Edit thats CF isn't it Dumo, silly me haha :D
BTW Tyrou, killer score! Find some more single stages for those cards ;)
http://img.photobucket.com/albums/v3...00-3204mhz.jpg
I believe the mod works, but I may be still a bit too cold for the mod to function correctly. The purpose of the mod is to allow your cpu temp to be adjusted with the pot. The mod allows me to adjust temps on the cpu ~30C above actual temp. That pic was using a 20K pot set to maximum value. Please don't show that pic again :p: I'm quite embarassed about the shoddy solder job I did. I've since redone the mod using a 1-turn 100K pot so I could experiment with different values, but in the end I ended up using 21K to max the temp out:Quote:
Originally Posted by kiwi
http://img95.imageshack.us/img95/9724/tcore22eb.jpg
Much better Stephen :)
Does anybody know how the board maker flashes the BIOS on these soldered on chips? Seem to me there must be a way after the chip is in place for a corrupt BIOS problem.
Why do you think your bios is corrupted?Quote:
Originally Posted by G H Z
Quote:
Originally Posted by s7e9h3n
beehh got a 18 sec on that speed.......:banana: :p:
No error codes on boot. The guide doesn't mention a CPU error tone so it could be the chip I guess, almost a toss up with the cost of this board.Quote:
Originally Posted by s7e9h3n
lol...show me your 8m on air again???? :p:Quote:
Originally Posted by Rol-Co
Are you sure cuz it looks like you were running 3224Quote:
Originally Posted by Rol-Co
http://rol-co.nl/images/waus2.jpg
What does "no error codes on boot" mean? Do you have a debug card?Quote:
Originally Posted by G H Z
Quote:
Originally Posted by s7e9h3n
i'm gona kill you with that after i finnish'd with sub zero.......:rolleyes:
@njkid32
that was waus-mod's cpu under single stage
stephen already got the 19.000 sec @ 242.2 from me,........he's crying atm....
looking for any Yonah help/advice....
http://www.ocforums.com/showthread.p...3&page=1&pp=30
thanks for any input (except flames ;))
basic overview, cant boot >1.3Vcore ... BSOD's
Joe_Camel, I've looked at your 2005 result, now is that mach II on CPU or GPU ??? // LN2 on CPU or GPU ? :)
my best 05's had: chilly1 SS on cpu and MachII on GPU (see sig)
never worked with LN2/Dice (yet ;))
Ohh, just saw that chilly1 thing, thought it was tube, hehe :D
Wuhuu, seems like my x1900XTX is highest watercooled on tha orb, and more to come, Im kind'a hoping top get top3 =) - More action tonight :)
boot @ 166fsb? or 200? you're problem could be there but then you got a terrible cpu.Quote:
Originally Posted by Joe Camel
with jumpers off the board boot @ 200fsb /2600mhz default
.
same "V-wall" with any setting:
with or without red jumpers, boot V jumper @ stock or high
D9 memory or cheep-o Geil
6600GT, x850, 1900's crossfire
win2k SP4 or XP
Maxtor HD or WD HD
"as shipped" BIOS or 1.3
sparkle 550 or Zippy 700 PSU
setup as is now...(pulled the HSF)
http://img206.imageshack.us/img206/1652/pict05091yn.jpg
Big Typhoon contact patch:
http://img83.imageshack.us/img83/194...05067zp.th.jpg
(mobo and chip off classifieds here from AndreYang)
http://img83.imageshack.us/img83/635...05074bs.th.jpg
PS i could never get the 6600GT's drivers to load (win2k)
edit: other observations:
CPU-z still reads Vcore wrong with win2k but works fine with XP
---
if ANYBODY would be SOOOO kind :worship: as to loan me a known "working" chip&mobo so i can figure out which is my problem ill gladly pay shipping (US 48) and/or... etc... PM me
.
It was an unpleasant surprise for me as well to see the bios chip soldered to the board. Last time I saw something like that in a solid priced board was back in the DFI nF2 Infinity earlier revision days.
I really wonder what do we do if the bios chip got corrupted :rolleyes:
One T2600 dead, tried it in my other board earlier today :(
Damn...sorry to hear bro...any idea how?Quote:
Originally Posted by G H Z
Nope, running on air unmodded @ 1.5V. Ran fine for the 15K session, the next day it just wouldn't boot anymore.