Micron D9 GMH\GKX\JKH etc club

Printable View

Show 100 post(s) from this thread on one page

10-27-2009, 01:47 AM
kuebk

Quote:

Originally Posted by Shiranui Gen-An

Hmm, I had something waiting for me in the mail today :D

http://img503.imageshack.us/img503/8...c00442q.th.jpg
http://img9.imageshack.us/img9/2114/dsc00443p.th.jpg

A kit of Transcend aXeRam DDR2-1200! I had a kit of these last year that unfortunately died after about one month, I can only assume due to the 0.12v overvolt of the Maximus Formula along with no active cooling. I did RMA them but the replacement I got didn't have D9GMH but Elpida :mad: I ended up selling them on eBay.

But as for this kit, do they use Micron ICs like the first ones I had did? If you know about Transcend memory, you know to look at the letter after the barcode on the stickers:

http://img33.imageshack.us/img33/2092/dsc00445o.th.jpg

(I already knew they were D9 before I bought them:p:)

So far, it looks like they only need 2.12v real for their rated speed and timings.

http://img194.imageshack.us/img194/5...l8axeram32.jpg

Nice. :)
Recently bought 2 sets of ballistix's tracer 1066, 1st do 600cl5 @ 2.12, 2nd do 600cl5 @ 2.14 - great results imo.
Also have 3rd set of them which do 600cl5 @ 2.2v
10-28-2009, 06:30 PM
Shiranui Gen-An

Dual SuperPi 32M@DDR2-1300 5-5-5-15-3-30 542FSB 2.45V

I had to switch to my secondary full PC rig with the DK X48 as I accidentally killed the HD3870 in the Maximus Formula open air bench (dropped a Team Xtreem stick on the card and it broke ONE of those TINY components right above the PCI-E connector :mad: ), but that turned out to be a boon. I was able to manage dual 32M stability at 542FSB on the 5:6 divider with 2.45V BIOS set :eek:

http://img688.imageshack.us/img688/8...xeramdk.th.jpg

As for bandwidth, I almost managed 11K across the board!

http://img507.imageshack.us/img507/5...l8axeramdk.png
10-29-2009, 05:00 AM
CryptiK

Nice work. I love that board for D9 overclocking, it does it so well.
10-29-2009, 01:32 PM
Don_Dan

Nice results Shiranui Gen-An! :clap:
10-30-2009, 12:32 PM
radaja

well after testing my new Q9650 to find the
lowest vcore for 4500MHz ,i decided to test out my
four sticks of cellshock pc8500 d9gmh's that i got.
i ran each stick with memtest86+ to see which
ones were the best.
the first kit had one stick that could run ddr2-1200
with 2.28v and one that needed only 2.14v in bios.
the other kit had one that needed 2.18v and one that
needed 2.14v.so i took the two good ones and tried
9x500@4500 w/1.37v ddr2-1200 w 2.14v bios 2.09v load.
these two are just as good as my last set of pc8000 cl4 kit.
now i have hope that with this kit and my new Q9650 i can
possibly do 9x556@5.0Ghz ddr2-1333MHz.i did it with my
E8400 lets see if i can do it with a quad core.:D

prime blend 1hr 18m
http://i36.tinypic.com/23h7yh2.jpg
prime blend stopped
http://i33.tinypic.com/2d13691.jpg
everest
http://i36.tinypic.com/b3se87.jpg
11-21-2009, 07:57 AM
JULO

GoodRAM PRO 900

GoodRAM is not popular in USA I think :D
That's because it's polish factory, they export their products only to central europe.

GoodRAM DDR2 2x1GB are the followed kits:
- 800mhz CAS4 (D9GMH)
- 900mhz CAS5 (D9GMH from april '08, GKX to april '08, later GKX too, as I see)
- 1066mhz CAS5 (D9GKX to february '09, HCD from feb '09)
- 1200mhz CAS5 (D9HCD only)
all of them are built on HJ-M1 ;)

A week ago I bought a kit of 900 and tested it on P965 (commando) with P4 631 Cedar Mill. sorry, but I didn't have anything better at the moment :(

some pictures:

http://www.otofotki.pl/img12/miniatu...5_PICT0012.JPG

http://www.otofotki.pl/img12/miniatu...8_PICT0007.JPG

http://www.otofotki.pl/img12/miniatu...8_PICT0002.JPG

the ones that I got were built with D9 GKX :D

CAS3
mem test 100% stable

http://www.otofotki.pl/img12/miniatu...6_cas3_tab.jpg

highest super_pi @ 2.65V

http://www.otofotki.pl/img12/miniatu...S3_432_265.jpg

highest valid @ 2.85V (all voltages measured with multimeter)

http://valid.canardpc.com/show_oc.php?id=816114

CAS4

mem test 100% stable

http://www.otofotki.pl/img12/miniatu...3_cas4_tab.jpg

I didn't have enough time to do some CAS4 PIs or valids, sorry ;)
However I'll try to get into CAS3 500+ club with E8600.

Later I'll share with some other tests, so be patient :D

http://www.otofotki.pl/img12/miniatu...0_PICT0001.JPG
11-28-2009, 09:15 AM
Shiranui Gen-An

Just having some fun with my DK X48 and Cellshock PC2-9200.

http://img262.imageshack.us/img262/9...l9reddevil.jpg
11-28-2009, 09:25 AM
aslanwas

Wow that's mice memory, i always loved cellshock, yesterday i got some crucial ballistix which should be capable of 1300 @ 2,12V, will post results later :d
11-28-2009, 09:46 AM
Don_Dan

Good to see someone of the club still playing, for now I can't do anything, I'll give a kit of good old D9 a spin after Christmas!
11-28-2009, 10:40 AM
radaja

Shiranui Gen-An,very nice fsb action.looks like another
great set of cellshocks.
11-28-2009, 11:24 AM
CpmF

661Mhz CL5 & 2.35v :

http://img262.imageshack.us/img262/1240/dsc00423c.jpg

I'm fed up of my P5N-e but my tpower i45 don't want to show me anything with my D9GMHs :shakes:
11-28-2009, 11:39 AM
radaja

thats because your OCing it sideways:rofl:
seriously though nice results
11-28-2009, 02:05 PM
aslanwas

Quote:

Originally Posted by radaja

thats because your OCing it sideways:rofl:
seriously though nice results

he's absolutely right man :D:D:D:D:D:D:D:D
11-29-2009, 06:41 AM
JULO

http://valid.canardpc.com/show_oc.php?id=854624
CAS3 500+
GoodRAM 900
11-29-2009, 01:59 PM
Don_Dan

Quote:

Originally Posted by JULO

http://valid.canardpc.com/show_oc.php?id=854624
CAS3 500+
GoodRAM 900

VDIMM? :D

That's a good achievement, though I don't like those suicide screens to be honest, I like to clock my RAM up and still be able to run a benchmark, like Everest.
11-30-2009, 06:37 AM
Shiranui Gen-An

Quote:

Originally Posted by aslanwas

@shiranui
If you need some OC Hardware, also ddr2 ram Team Xtreem 1300, contact FOX from TEAM O.C.X. , also on hwbot.com :up::up: he has a lot for sale at the moment

He dropped the price to a level I was willing to bite on, so I will have some shiny new Team 1300s on the way.
11-30-2009, 06:41 AM
aslanwas

Quote:

Originally Posted by Shiranui Gen-An

He dropped the price to a level I was willing to bite on, so I will have some shiny new Team 1300s on the way.

wow, waiting for 1600+ under dice :D:D:D:D
i also got some crucial ballisitix 1066@1300 5-5-5-15 2,14V
11-30-2009, 09:38 AM
JULO

Vdimm? 3.15 :D
but they're still alive, survived this voltage ;)
12-08-2009, 02:32 PM
Shiranui Gen-An

Quote:

Originally Posted by CpmF

I'm fed up of my P5N-e but my tpower i45 don't want to show me anything with my D9GMHs :shakes:

That's rather odd, I've seen some nice clocks with D9 on the I45.
12-09-2009, 09:50 AM
toyone

Crucial Ballistix Treacer 1066Mhz D9GMH + DryIce
Foxconn Mars (Mch paper pot :))
E6400 DryIce
Chieftec 620W
pic1
pic2
pic3

CL4-4-4-12@1311Mhz@2.85V
CL4-5-5-15@1484Mhz@2.85v

Hungarian CL4 record. :banana:
12-09-2009, 12:04 PM
JULO

yesterday I got a kit of Xtreem A2-DD2-1200
10. week of 2007 :D 6TD22

it does 1200 4-4-4-12 @ 2.42V full stable :rocker:
I'll try to set some records when I'll get better Mobo
I think Commando is good only for CAS3

http://img22.imageshack.us/img22/4848/pict0003f.th.jpg

[img=http://img22.imageshack.us/img22/4848/pict0003f.th.jpg]

sorry for the quality ;)
12-09-2009, 12:11 PM
Don_Dan

Quote:

Originally Posted by toyone

Crucial Ballistx Treacer 1066Mhz D9GMH + DryIce
Foxconn Mars (Mch paper pot :))
E6400 DryIce
Chieftec 620W

Hungarian CL4 record. :banana:

Good work! :up:
12-09-2009, 01:44 PM
toyone

Thanks Don_Dan.
12-10-2009, 02:01 AM
aslanwas

whats the germany CL4 record ?
12-11-2009, 01:50 PM
JULO

I did some quick tests with my Teams 1200 ;)
@ 2.30V (real)
http://img189.imageshack.us/img189/1211/87048.jpg

Show 100 post(s) from this thread on one page