***Official***Z68X/P67A-UD7 Club/Discussion/Info**

Quote:

---

Originally Posted by andressergio

well after trying mostly all the combos of LLC i realized that more vdimm was needed to pass prime at LLC7 this bios F3 and latest F8 or F8h as for more vdimm, and the tendency keeps going up...on F7e i needed just 1,66 on F8f 1,68 now on F8 or F3 from B3 1,7 to maintain 2133 C7 at 5ghz, i can pass easy on 1600 C7 or whatever

---

Did you go back to F7 to confirm?

i go back to F8f and i pass more time of prime lower volts, i go to F8 and same as F3 cant find a middle point like good old LLC1...

thanks guys i think GIGABYTE needs to check this bios as they incoporated nice things loads faster but needs some work on them

flashed to F4a and locked up on loop 12 of prime pfffffff if not a good bios will go back to B2 F8f this is kinda frustrating

Quote:

---

Originally Posted by andressergio

Glen any improvements over F3 ? im on B2 board also flashed to F3

cheers :up:
Sergio

---

hiya mate not really tried much on the f3 or 4a but i do know that all the later bios needed a jump of 2 notches on vcore to have the same speed prime stable

Quote:

---

Originally Posted by andressergio

i go back to F8f and i pass more time of prime lower volts, i go to F8 and same as F3 cant find a middle point like good old LLC1...

thanks guys i think GIGABYTE needs to check this bios as they incoporated nice things loads faster but needs some work on them

---

i flashed to f3

i did manage to boot @ 52x

man this gigabut board flacky
i been on it 10+ hours n nice boot loops 4E and reboots
woulda been nice if it had a profile save like asus:rolleyes:

Quote:

---

Originally Posted by zsamz_

i flashed to f3

i did manage to boot @ 52x

man this gigabut board flacky
i been on it 10+ hours n nice boot loops 4E and reboots
woulda been nice if it had a profile save like asus:rolleyes:

---

mate F11 save profiles F12 load ;)

Quote:

---

Originally Posted by andressergio

mate F11 save profiles F12 load ;)

---

should i put on f8f bios

Quote:

---

Originally Posted by zsamz_

should i put on f8f bios

---

i will go back for sure

Quote:

---

Originally Posted by GLENBOY

hiya mate not really tried much on the f3 or 4a but i do know that all the later bios needed a jump of 2 notches on vcore to have the same speed prime stable

---

yes but for my tests only need vdimm, in my case vtt dont help the more the worse, vcore on F8f was 1,428 LOAD 1,452 IDLE VDIMM 1,68 (all set on bios) now on new bios even F8 or F3 or F4a i need 1,7 and when its going to finish the hour of prime bsod with 124...

Quote:

---

Originally Posted by andressergio

i will go back for sure

---

@bios wont go back:(

Quote:

---

Originally Posted by zsamz_

@bios wont go back:(

---

this one mate :up:

http://www.fileden.com/files/2009/12...7aud7.f8f1.zip

Quote:

---

Originally Posted by andressergio

this one mate :up:

http://www.fileden.com/files/2009/12...7aud7.f8f1.zip

---

thanks

please tell me what i'm doin wrong
i cant do nothin with the board
i did boot 100x52 to windows on f7x 1 time

i'm close to takin board out n rma this b2 board

Code:

---


### MB Intelligent Tweaker ###

Advanced Frequency Settings:

CPU Clock Ratio .......................................[ 50

> Advanced CPU Core Features

CPU Clock Ratio .......................................[ 50
Real Time Ratio Changes In OS .........................[ Disabled
Intel(R) Turbo Boost Tech .............................[ Disabled
Turbo Ratio (Core 1)...................................[ Auto
Turbo Ratio (Core 2)...................................[ Auto
Turbo Ratio (Core 3)...................................[ Auto
Turbo Ratio (Core 4)...................................[ Auto
Turbo Power Limit (Watts)..............................[ 1000
Turbo Current Limit (Amps).............................[ 500
CPU Cores Enabled ............................ ........[ All
CPU Enhanced Halt (C1E) ...............................[ Disabled
C3/C6 State Support ...................................[ Disabled
CPU Thermal Monitor ...................................[ Disabled
CPU EIST Function .....................................[ Disabled
Bi-Directional PROCHOT ................................[ Disabled

<

Spread Spectrum .......................................[ Enabled
BCLK/DMI/PEG Clock Control ............................[ Enabled
BCLK/DMI/PEG Frequency Control ........................[ 100
System Memory Multiplier (SPD) ........................[ 21.33

Advanced Memory Settings:

System Memory Multiplier (SPD) ........................[ 21.33
Performance Enhance ...................................[ Standard
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving A Rank A. ........................[ Auto

Channel A Timing Settings:

##Channel A Standard Timing Control##

CAS Latency Time ......................................[ 9
tRCD ..................................................[ 9
tRP ...................................................[ 9
tRAS ..................................................[ 40
tRC ...................................................[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR ...................................................[ Auto
tWTP ..................................................[ Auto
tWL ...................................................[ Auto
tRFC ..................................................[ Auto
tRTP ..................................................[ Auto
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ AUTO
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto

Channel B Timing Settings:

##Channel B Standard Timing Control##

CAS Latency Time ......................................[ 9
tRCD ..................................................[ 9
tRP ...................................................[ 9
tRAS ..................................................[ 40
tRC ...................................................[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR ...................................................[ Auto
tWTP ..................................................[ Auto
tWL ...................................................[ Auto
tRFC ..................................................[ Auto
tRTP ..................................................[ Auto
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ AUTO
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto

Advanced Voltage Control:

CPU

Load Line Calibration .................................[ Level 1
CPU Vcore .............................................[ 1.44
QPI/VTT Voltage 1.050v ................................[ 1.15
System Agent Voltage 0.925v ...........................[ Auto
PCH Core 1.050v .......................................[ 1.1
CPU PLL 1.800v ........................................[ 1.8

DRAM

DRAM Voltage 1.500v ...................................[ 1.64
DRAM Vref 0.750v ......................................[ Auto
DRAM Termination 0.750v ...............................[ Auto
Ch-A Data VRef. 0.750v ................................[ Auto
Ch-B Data VRef. 0.750v ................................[ Auto
Ch-A Address VRef. 0.750v .............................[ Auto
Ch-B Address VRef. 0.750v .............................[ Auto

Miscellaneous Settings

Isochronous Support ...................................[ Disabled
Virtualization Technology .............................[ Disabled

---

Quote:

---

Originally Posted by zsamz_

thanks

please tell me what i'm doin wrong
i cant do nothin with the board
i did boot 100x52 to windows on f7x 1 time

i'm close to takin board out n rma this b2 board

Code:

---


### MB Intelligent Tweaker ###

Advanced Frequency Settings:

CPU Clock Ratio .......................................[ 50

> Advanced CPU Core Features

CPU Clock Ratio .......................................[ 50
Real Time Ratio Changes In OS .........................[ Disabled
Intel(R) Turbo Boost Tech .............................[ Disabled
Turbo Ratio (Core 1)...................................[ Auto
Turbo Ratio (Core 2)...................................[ Auto
Turbo Ratio (Core 3)...................................[ Auto
Turbo Ratio (Core 4)...................................[ Auto
Turbo Power Limit (Watts)..............................[ 1000
Turbo Current Limit (Amps).............................[ 500
CPU Cores Enabled ............................ ........[ All
CPU Enhanced Halt (C1E) ...............................[ Disabled
C3/C6 State Support ...................................[ Disabled
CPU Thermal Monitor ...................................[ Disabled
CPU EIST Function .....................................[ Disabled
Bi-Directional PROCHOT ................................[ Disabled

<

Spread Spectrum .......................................[ Enabled
BCLK/DMI/PEG Clock Control ............................[ Enabled
BCLK/DMI/PEG Frequency Control ........................[ 100
System Memory Multiplier (SPD) ........................[ 21.33

Advanced Memory Settings:

System Memory Multiplier (SPD) ........................[ 21.33
Performance Enhance ...................................[ Standard
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving A Rank A. ........................[ Auto

Channel A Timing Settings:

##Channel A Standard Timing Control##

CAS Latency Time ......................................[ 9
tRCD ..................................................[ 9
tRP ...................................................[ 9
tRAS ..................................................[ 40
tRC ...................................................[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR ...................................................[ Auto
tWTP ..................................................[ Auto
tWL ...................................................[ Auto
tRFC ..................................................[ Auto
tRTP ..................................................[ Auto
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ AUTO
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto

Channel B Timing Settings:

##Channel B Standard Timing Control##

CAS Latency Time ......................................[ 9
tRCD ..................................................[ 9
tRP ...................................................[ 9
tRAS ..................................................[ 40
tRC ...................................................[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR ...................................................[ Auto
tWTP ..................................................[ Auto
tWL ...................................................[ Auto
tRFC ..................................................[ Auto
tRTP ..................................................[ Auto
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ AUTO
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto

Advanced Voltage Control:

CPU

Load Line Calibration .................................[ Level 1
CPU Vcore .............................................[ 1.44
QPI/VTT Voltage 1.050v ................................[ 1.15
System Agent Voltage 0.925v ...........................[ Auto
PCH Core 1.050v .......................................[ 1.1
CPU PLL 1.800v ........................................[ 1.8

DRAM

DRAM Voltage 1.500v ...................................[ 1.64
DRAM Vref 0.750v ......................................[ Auto
DRAM Termination 0.750v ...............................[ Auto
Ch-A Data VRef. 0.750v ................................[ Auto
Ch-B Data VRef. 0.750v ................................[ Auto
Ch-A Address VRef. 0.750v .............................[ Auto
Ch-B Address VRef. 0.750v .............................[ Auto

Miscellaneous Settings

Isochronous Support ...................................[ Disabled
Virtualization Technology .............................[ Disabled

---

---

1,66 vdimm

1,47 vcore LLC1 has big drop 1,452 IDLE 1,428 LOAD

enable boost tech

no need of more PCH than standard

vtt 1,1 should be fine

Quote:

---

Originally Posted by andressergio

1,66 vdimm

1,47 vcore LLC1 has big drop 1,452 IDLE 1,428 LOAD

enable boost tech

no need of more PCH than standard

vtt 1,1 should be fine

---

nice boot loop:rofl:

you need more vcore man, SB OCing is so simple.

lol and most chips are sucking. BTW back off the ram, do one at a time.

Yeah saw a fail chip on OCN...2600k needing PLL for x45....

Quote:

---

Originally Posted by sin0822

you need more vcore man, SB OCing is so simple.

lol and most chips are sucking. BTW back off the ram, do one at a time.

---

chip a 2500k
i got it to boot @ 52x once on f7x

now on f8f i can only get to 47x
i'm on phase so i did push to 1.58v

Quote:

---

Originally Posted by zsamz_

nice boot loop:rofl:

---

dang :confused:

i set vtt to 1.18 booted into windows @ 53x

jumped to 55x

what safe max vtt lol

tryin to boot @ 53x again:rofl:

Quote:

---

Originally Posted by zsamz_

i set vtt to 1.18 booted into windows @ 53x

jumped to 55x

what safe max vtt lol

tryin to boot @ 53x again:rofl:

---

I bench with around 1.16-1.2 ish depending on memory speed and timings:up:

Quote:

---

Originally Posted by l0ud_sil3nc3

I bench with around 1.16-1.2 ish depending on memory speed and timings:up:

---

thinkin of buyin another cpu ....but might be the board
now i cant go into windows @ 47x:rofl:
it just reboots after windows screen

EasyTune6 (Intel) B11.0323.1

http://download.gigabyte.us/FileList..._et6_intel.exe

i was using sata2 ports

windows is fried :rofl:

Quote:

---

Originally Posted by zsamz_

i was using sata2 ports

windows is fried :rofl:

---

you have a b2 don't you? if you do you might as well RMA, I have not had any problems with my UD7 b3, i.e. cold boot

Quote:

---

Originally Posted by l0ud_sil3nc3

you have a b2 don't you? if you do you might as well RMA, I have not had any problems with my UD7 b3, i.e. cold boot

---

its lookin that way
i couldnt even reload windows on sata3

i'm reloading windows on last sata2 ports

does your sb heatsink get hot?
mine @ 35c runnin stock reloading windows

i'll play for another hour n clean up the board
2 sata2 ports are gone

@ least i know cpu good for 53x