Yeah fredyama-san's using the same stepping cpu as V....
Quote:
modPI 1M: 21.328s
Clock Speed: 3,905.27MHz@LN2 cooling (bukkake)
modPI 8M: 3m59.406s
Clock Speed: 3,848.51MHz@LN2 cooling (bukkake)
modPI 16M: 9m00.468s
Clock Speed: 3,837.16MHz@LN2 cooling (bukkake)
Excellent work, Vince! Congrats on a trifecta :toast:
Run the battery of SPi (1M/8M/16M/32M) and PiFast :D and you might end up being the King of Hardcore Benchmarking... Just invincible on all fronts... Good luck! :up:
the orange dimms are rated for 3.5V only :)Quote:
Originally Posted by MaSell
Damn.....This mobo(P4GD1) sucks as for 3D.....I only got 49000+ at 3757MHz with my DOTHAN and VGA on air @ 708MHz and 2059MHz......Sucks big time.....:mad:
Also Ricky tweak doesn't work here.....:(
I'll see what I'll do tommorow with the VGA under phase change.....
Not gonna happen....at least for a quite awhile (finding 3.6+ cpus) ;)Quote:
Originally Posted by afireinside
Only for the expert...Quote:
Originally Posted by MaSell
:p:Quote:
Originally Posted by s7e9h3n
K|np|n please if you are about to run so PI benches do 2M and 4M also please!
Good Luck.
BTW Very nice results!
Amazing work KingPin!!! :toast: :toast:
Amazing K|ngp|n - you're the new OPP ;)
LOL...I have been waiting for you to say this for some time now Hipro. The system power isn't there like it is on the p4c is it now? ;). You need MASSIVE clocks on your card and have to be running 14x with high bus speed @ 3.8ghz+ to pull a heavy score....freeze that card man. You would be surprised what a 110more mhz on your core and 100mhz on your mem will give you in increases...especially in nature and drag.Quote:
Originally Posted by hipro5
I read it many times but...
what's the ricky tweak??
Sorry a little OT:
k|ngp|n - got a pic of your mobo insulation? The reason I ask is because I'm having a *slight* prob keeping condensation off my mobo. I've already lost a channel on my Expert and don't really want to risk another mobo:
http://img213.imageshack.us/img213/1...ofrost15qq.jpg
TIA :toast:
@larry: ACPI Multi proc ;)
Congrats with the trifecta k|ngp|n :toast:
stephen> he probably sprays the board with conformal then uses nail polish and cleans frost off and blow drys after he's done. ln2 will frost everything over like in your pic but worse. It's safe. I have no idea how you lost a board :stick:
Conformal can't cover EVERYTHING on a pcb. There's spaces underneath caps an IC's that are almost impossible to reach, even for the coating......Quote:
Originally Posted by afireinside
Thats an awesome CABNE 0530 you have there k|ngp|n,Quote:
Originally Posted by k|ngp|n
congrats on the scores. :toast:
Thats what nail polish is for ;) All the caps and fets around my DFI's CPU socket are 110% sealed off.Quote:
Originally Posted by s7e9h3n
congrat on the trifecta.
so for normal lanparty yellow dims are better?? even for tccd ram?? this i didnt know.
Yellow for BH/LL, orange for TCCD ;)Quote:
Originally Posted by metro.cl
What the hell does Windows run like @ 3.96Ghz? It's instantaneous @ 2.7Ghz for me, I can only imagine ~4Ghz...
Nice job on the overclocking, man.
Did you insulate your mobo with plastic spray too?.....Gee too much snow you've got there!.....I insulated my mobo and the adaptor (for dothan) ALL DAY long yesterday so as to put it under cascade......Working with the cascade @ -105*C for MANY hours, I don't see a thing of that "snow".....Is it that big difference from -105* to - 160*C as for the condancation ?......Quote:
Originally Posted by s7e9h3n
It's 1500+ marks lower than the P4C800 Vince.......TOO much difference.......:(Quote:
Originally Posted by k|ngp|n
I'll try to phase change the VGA now hoping not to have a cold bug......or else I'll have to put my CPU under LN2......:(
Very nice work :toast:
Have people who have condensation problems considered aerogel ?
Regards
Andy
Well you will be facing more cold, i wont say you get more condensation, but its harder to work longer WITHOUT condensation.Quote:
Originally Posted by hipro5
@ s7e9h3n YGPM
Thx...replied......Quote:
Originally Posted by Waus-mod
I just want to clarify here - I'm in no way a noob to insulation and cooling....it's just that this autocascade is a BEAST of a totally different kind. Talking to Chilly1, his only suggestion is that I add mobo HEATERS to defeat the condensation......:rolleyes: