You'll have to use A64 tweaker for that i'm afraid, i don't think systool can run a script at boot but i may be wrong?
Printable View
You'll have to use A64 tweaker for that i'm afraid, i don't think systool can run a script at boot but i may be wrong?
i have the asrock uli my pc4000 ram is set in the 2 blue slots 2x 512 but my ram by cpu-z or anything else keeps comin up as 128.mhz instead of 200 ?? please help :brick:
Come on Kiwi. The DFI nF4 boards are as quirky as. I've had bad ass cold-boot followed by VX that went down the gurgler.Quote:
Originally Posted by kiwi
So DFI blame the VX and all CH-5/6 UTT Modules. Well my OCZ 2gb PC4000 Platinium based on the CE-6 module also exhibits some of the old problems ive had. I've had cold boot as well as the random times when Temperature monitoring (ITE SG or BIOS) goes crazy (which usually means cold boot issues on the way)
I literally can't turn off my computer properly half the time! And before you blame user un/competence, i have more fans then i know what to do with in my case for cooling (crossflow + 3 x 80mm, + 2 x 120mm intake) etc etc so you can factor that out. Also I am a very mild, conservative overclocker, not really willing to go more then .1V over stock.
DFI are notorious for their 'quality'. If they want to change their image they'd better have 2 generations at least of close to faultless products (And their nF4 series DEFINATELY does NOT count!)
Slightly more ontopic, I really hope that when nVidia leverages their ULI acquisition that they leverage it to make better products, not just to leverage their own profits, or strictly as a cheap strategic entry in Taiwan/ scouting out ATI.
what ocw bios for this board does-not have the 274 fsb problem and has the option to run the ram 2t instead of 1t?? i have ocwb1 fsb is fine but it has no option to change ram to 2t....any help much appreciated...
Quote:
Originally Posted by leo5111
ocwb2:
no 274 htt block
can run 1t and 2t cmd
can adjust MAL and RP.
I've been speculating about the possiblity of modding in a digital out, please refer to the thread I've created about it:
http://www.xtremesystems.org/forums/...ad.php?t=85573
my brother have a asrock 939 dual sata2 with bios beta1 and vmod and a opty 144 and can run 340HTT with no problems , great mobo , the only problem is that the memorys at 1T only run at maxim 245Mhz , anything above 245Mhz only 2T.
mascaras,Quote:
Originally Posted by mascaras
I still have the asrock dual sata2, just with some simple components.
Can i ask what ram your brother is using?
Regards
my brother before was using 2x256mb CH5 , now he is using 2x512mb gskill FC .
Got the Board, too.
Didn't overclocked it yet.
But I have a problem:
My Memory doesnt wotk with 200mhz. (also not with 2T)
Anyone has an idea? Maybe these 2,7V aren't enough for BH-5?
166mhz are working perfectly with tight timings.
I am at 46s in SuperPI 1M. (CPU @ stock, Ram @ 166)
Let's see how it does in comparision to my DFI.
Anyone tried the modded bios?
Which programm do I need to flash? It's a *.rom file.
Bump. No idea?
Upping voltage with DDR booster didn't work.
Running 2T, doesn'T work, too..
Some Bios related problems :(
Got to say this is one niiiiiiice board. Currently have my DC Opty at 2.6Ghz with RAM at 260mhz CAS 2.5. Will try the 1.80 BIOS tonight to see if I can do 9x300 for that very nice usual 2.7Ghz ceiling on air (particularly with my low airflow quiet system)
as a side note, I can't believe that at 1280x768 with everything at high, 2x AAA, full HQ AF, no soft shadows and my XL oced to XT speeds, it took 2.6GHz to not see any hickups on the F.E.A.R. internal benchmark.
I have ocwb 1 runing fine for me, Its been crashing alot lately though, might have to give a new bios a try sooner or later :p
shes one of my main folders..
Well, upgraded to P1.80 and it's gold.
Tried 270x10 but as expected the RAM just couldn't do that speed at 2.7v and wouldn't boot into windows with a missing file error. Since the 274 HTT lock was removed with P1.80 I then tried 300x9 and voila, 2.7Ghz without effort and the RAM running at 245mhz effective (according to CPU-Z) with the 166mhz divider at 2.5-3-2-7 (will play around with tighter timings later).
BIOS P1.80 also seems to address the 1T issue as I haven't noticed any funny stuff compared to P1.40 which was the last BIOS I was using.
Overall, a stunning board and all the more amazing considering the price.
They fixed the HTT limit? At last! I might have kept mine if they'd done that back in October (the OCW BIOSes didn't do it for mine). I think that deserves a :toast:
Yup, finally!!! I think they just got sick of everyone :banana::banana::banana::banana::banana:ing about it, and there was A LOT of :banana::banana::banana::banana::banana:ing. Definitely nice as it opens up some possibilities. I hate though how they limit vcore and vdimm so as not to encroach on Asus. Still, with the right components you can get a wicked oc. I'll see if I can get 2.8Ghz tonight. Not expecting it, but it would be icing on an already delicious cake.
Flashed to the new official p1.80 bios, and it actually works rather nice, I must say. But its to early to say anything yet cuz i´ve only used it for a hour or so 1t ofcourse@270httx9
Go to any flash sites and check to see if you get any spontaneous reboots. If not, 1T is solid.Quote:
Originally Posted by Pillo-kun
Tried for 2.8Ghz last night and almost booted into windows but I think at stock volts that was too much. Got 2.75Ghz though so can't complain. So 306x9 with a 166 divider puts me right at 250mhz for the RAM at 2.5-3-2-7 according to cpu-z. Pretty pleased with the results. I doubt there would have been much more headroom for the CPU either way.
Will play around with the RAM later for fun to see how far beyond 260 CAS2.5 I can go on this mobo.
Its very stable at 1t.
Board runs nice even at 333 mhz htt. No 1/2 T bugs for me. Ram runs nice on 1T setting. I can overclock my opti to 3ghz, but would need more than 1.4v to make it stable. 1.80 bios makes wonders.
Congrats, looks like ASRock finally figured it out. Great board with the P1.80 and if you so choose you can always volt mod and vdimm mod; I'm good where I am though :)Quote:
Originally Posted by Pillo-kun
You're at 2.9Ghz w/o volt mod? If so, that's pretty impressive :toast:Quote:
Originally Posted by Malkec
1.90 is out now.. and here I was going to get 1.80.
Lol.
Apparently they're on a roll ;) Probably just a code update for AM2 this time as I don't know what else they could do outside of offer better vcore and vdimm options.