Nice V :toast: Still like the other idea better. ;) BTW looks like I might be giving you a ring in the next few days w/ a tube idea to try. :)
Printable View
Nice V :toast: Still like the other idea better. ;) BTW looks like I might be giving you a ring in the next few days w/ a tube idea to try. :)
"other " idea is still happening JQuote:
Originally Posted by harleybro
I talked to my boy with the cnc this morning about a few things. I will post it here when first one is done. I hate multiple threads on same topic.
Should have some new work with the SLI setup shortly too, no time for anything lately....
Btw-- I managed 780/2050 with that silly little container yesterday on one MSI 7800gtx. The xfx card goes to 820/2100+ at same temps :(
Those are still pretty awesome clocks... don't you hate it though when the two cards are so unequal? My case is even worse, both XFX, one does 746/1980 and the other 676/1905 individually on water....
Getting ready for you to smash some 05 and 03 records!!! :)
Damn that does suck tario..the cores are way different too :(Quote:
Originally Posted by gocchin
Are you going to try and get a better card to a match the good xfx? These cards are nowhere to be found. I might be able to get close to 800 out of the core on the msi card for 03', but the mem isn't going over 2060 or so for sure. It was artifacting pretty bad and more volts don't help. My xfx card is insane. I think it's capable of something like 830-2130+ for 3d with the right touch. I definitely need another card to match it.
Yeah Vince, it seems like if you luck out and get an awesome XFX card then it's usually a killer card. I think the one strong XFX I have will rock with sub zero cooling... as a matter of a fact I'm running both cards only with vgpu mod, no mem mods at all as the memory doesn't seem to respond well at all to any increase.... 830/2130 would be a dream.... I'm stuck with this pair for now cause as you said, they are just nowhere to be found and they're not exactly cheap ;)Quote:
Originally Posted by k|ngp|n
This apmw chip might be the one to get the job done, though I've yet to test the gpmw :)
Ran some mark 05 and 03 single card (def gtx clocks) this morning with -82c on my dragon unit and IHS still on and got this using 15x:
http://pic8.picturetrail.com/VOL256/.../122482559.jpg
http://pic8.picturetrail.com/VOL256/.../122482558.jpg
14x was good upt to 3750mhz, then I had to raise multi due to mem controller taking a :banana::banana::banana::banana:. Pretty sure there is still more left in the chip, especially with some colder base temps. I had the vcore at 1.525x 123% and my cpu unit is still killin' it :P
Say hello to my little friend..
No more ln2 supply issues for me. Dropped off 230 litres of Xtreme glory. Now I truly have an unlimited supply of ln2. Will definitely come in handy soon.
http://pic8.picturetrail.com/VOL256/.../123099784.jpg
LOLQuote:
Originally Posted by k|ngp|n
:D
Beautiful thing isn't it? ;) How tall is your container it looks much shorter then mine but mine is supposed to be 180L? Is it high pressure or low. Mines low at I believe 22psi and I would guess about 6ft tall.
http://img224.imageshack.us/img224/8...e1244hv.th.jpg
Wow, that's a nice cpu you've got there. I only wish my chip would take the voltage. It refuses to boot into windows @ 1.74+ Vcore even though evap temps are ~-72C :rolleyes: BTW, I'm not sure which bios your using with which board but stay away from anything higher that +113% for the Vcore. You'll significantly increase the chances of killing your cpu ;) But then again, 1.88Vcore isn't an option in the bios :p:Quote:
Originally Posted by k|ngp|n
Very :)Quote:
Originally Posted by harleybro
It shorter than yours but alot fatter. I was going to get 180litre, but the 230l with the welded on cart is easier for me to wheel around and a little more capacity. It weighs around 1100 pounds full I think.
s7e9h3n: thanx, It seem like a great one so far. The really good ones to me are the chips that can take the volts, because they almost always scale the best. So far all runs done on SLI-DR...can't remebr what bios. Should be benching the expert/SLI on ln2 soon.
:slobber: You guys have no idea how envious I am of those massive ln2 dewars you have. The worlds best cooling whenever you're in the mood to bench!
I saw 3 of these yesterday at My uncles work. I don't even know why they had them as its a produce company. I saw them in the food processing department. Anyone got an idea as to why they would have these. My uncle doesn't know why as he pick produce order and my bro doesnt know either(he works there aswell).Quote:
Originally Posted by harleybro
Tim
P.S. Oh and today my dermatologist sprayed some LN2 on my skintags. It was really cool.
I was in the garage filling my 30l dewar up last night after 2am sometime :)Quote:
Originally Posted by afireinside
I left the door open for ventilation and the smoke was rolling out onto the driveway. My neighbors are prolly like wtf is with that guy...lol
Mad scientist @ work:toast:Quote:
Originally Posted by k|ngp|n
:rofl:Quote:
Originally Posted by k|ngp|n
you prolly bomb them with dryice ass wel :D
No....that's what comes out of the bathroom...lolQuote:
Originally Posted by kutteke
No....that's what comes out of the bathroom...lolQuote:
Originally Posted by kutteke
ROFL! I've thought about bombing neighbors then I remembered he's a cop :D
I remember showing my dad a pic of harleys dewar and saying we need one of these in our driveway... I don't think he liked the idea very much.
I sometimes dump my leftover DI into the snow outside the house and it starts smoking up... yeah the neighbours said exactly that "What the heck are you doing???" ;)
I took my phase, mobo etc. on business trip to midwest. I was stayin on one of those extended stay hotel....... You should see the expression on(room service lady) her face :eek: ...the first time the did room service:)
hehe... we are a crazy breed no? lol
-85c loaded base temps on my container got me this today :)
http://pic8.picturetrail.com/VOL256/.../123434774.jpg
IHS still on too. Card were only run at -25c and still 2140mhz almost!...with lower gpu temps and some more clocks on core, that 18,6 score at the top isn't looking so tough after all. I thihk it can be done on less than 3900mhz. I tested it today up to -98c and it was good running 1.55x123% lol :eek:
:shocked: :slobber: ehhh...what was I supposed to say...? ...forgot...Quote:
Originally Posted by k|ngp|n
Nice:toast: ...Still with 0530?Quote:
Originally Posted by k|ngp|n
Yep. This chip would probably do well on a cascade too with the just the right heat load dumo.Quote:
Originally Posted by Dumo