They all suck! I tried a E6 3200+ and the best i could do was 2650 and i'm not even sure that was stable.. Pretty close to 1.7v.
The new 3000+ BP week 25 chip i have now can only do 2550-2600 at 1.7v.
Great water cooling ofcourse.
Printable View
They all suck! I tried a E6 3200+ and the best i could do was 2650 and i'm not even sure that was stable.. Pretty close to 1.7v.
The new 3000+ BP week 25 chip i have now can only do 2550-2600 at 1.7v.
Great water cooling ofcourse.
Here's my E6 suicide shot...I know its not very meaningful because its not stable, but this 0529 E6 is better than my 0516 E3 (2.7 Stable)...
the temps are horrible on oem cooler...pump coming in the next couple of days from RMA so I might pop off the IHS on the E6 (E3 already popped off)
http://valid.x86-secret.com/show_oc.php?id=32852
http://valid.x86-secret.com/cache/32852.png
aznblueeboi, what's the stepping of that chip? And what speed/voltage is it stable at?
It's a suicide shot...I know its stable at 2.7 right now...but I'm waiting for my WC to get setup and probably remove the IHS to see if I can go 2.8+ stable
LBBWE 0529 CPDW is the E6 stepping...
FWIW my E6 is running 2.6 @ 1.5 right now burning in, very stable so far, hoping for lower vcore. I did have it stable at 2.75 using 1.6v but I was told this was too much for air even though my load temp was 44C. I didn't bother to push it higher then 2.75 after I read that. I have the same stepping as evetS-
1.6 is fine for air, im on 1.625 cuz my chip sucks and wont go past 290x9
http://img352.imageshack.us/img352/3...09949bl.th.jpg
Been sitting on my desk since Monday, haven't had time to pop it in yet. :(
From the looks of it though this will probably be just a "so so" chip. :(
How do you think abput this??
I have bought a 3000+ BW (E6 revision), and here are my first results...
Stepping:
http://www.metamods.com/Imagenes/Ven...W/IMG_0424.jpg
SuperPi 8Mb @ 2900, 1.66v (watercooled)
http://www.metamods.com/Imagenes/Ven...2900%20Mhz.JPG
I think that it has more room to go up, but I have it from yesterday, I have to tweak a little bit more...
Tell me your opinions... :D
Mine does 2.8 watercooled...
I popped off the IHS...and for anyone interested, the die size is the same as the E3 stepping
If you can get it prime stable @2.9GHz, I'd say you have a very good one there Lord.
Of course, the one I got has a different stepping, dang my luck... :(
I havent tried Prime, but SuperPi 32Mb and 3dMark05 run perfectly @ 2922... :D :D :D
I also have a suicide screenshot @ 3050 Mhz... :rolleyes: :rolleyes:
I think that I am lucky getting this little beast... :cool:
Does anyone have 0530CPFW is it good or not?
tnx
Are there any results of a 3200+ E6? I need the 10x multiplier, because the HTT of my motherboard is limited to 280 MHz and I want more than 2520 MHz...
Mine was a week 26 E6 3200 i believe and it sucked hard at 2550-2650 max.. Though i didnt play around with a 3/4 mult or anything other then 1/1 mult untill i swaped it for a crappy 3000+ BP that will only do 2600Mhz but at 1.72v.
Then use a multi... there'll be absolutely no performance hit, none.Quote:
Originally Posted by d4n13l
EDIT: I meant divider... sorry. What mobo do you have?
I have got a Shuttle SN95G5 barebone with nForce3 Ultra chipset. I don't liek using clockgen, so it would be nice having a 10x multiplier and up to 2800MHz selectable in the BIOS setup. At the moment I'm running a 3000+ BI @ 280 x 9.
I just sold my CBBWE 0528CPBW. I barely got it to windows at 300x9 ~1.65-1.66v... that wasn't even close to stable.
Compared to my current Venice it's a waste... already shipped it out. I'm sure it woulda done alright, but not as well as what I have right now.
I haven't done much overclocking in my E6 but it done some very fast and it rebooted at 2700mhz so..
Xyus
I'm stable at 2.65 with my 3500. RAM currently holding me back
LBBWE 0528APAW 1.6v
Hmm looks like the newer chips are'nt doing so well compared to week 15 to 26
I have 2 E6 chips, a 3000 0530cpfw and a 3200 0531epaw. Both hit a wall at 2500-2530, with the 3000 being more stable. I just got my e3 and it passed OCCT at 2700.
i got a 0528 GPFW i cant even do 2500.....but one thing about my chip is that it runs really how 40-42 idle and 54+ load even at stock......with XP90 and a really good ventilated case....im changing it in coulpe days but also for a even never e6 (at least i got to choose from 20 of them)
does anyone else have experience with week 30+ cores?
This was given on air.
I can run 330 htt on memtest for hours but doesnt run windows.
This is my suicide shot running 32 bits. On 64 bits I can't run over 300 htt
http://img172.imageshack.us/img172/5205/3108bc.th.jpg
Quote:
Originally Posted by MonkSP
Humm, it seems that newer E6 arent doing so well... :rolleyes: :rolleyes:
Here it is my suicide screenshot with my E6 0529 APEW watercooled:
http://img279.imageshack.us/img279/2...idio1rj.th.jpg
3050 Ghz, of course unstable...
Max I have got 100% stable is 2922 Mhz with 1.69v and 2900 Mhz with 1.66v.
Look at this 0.03v necesary to go up only 22 Mhz... :stick:
Quote:
Originally Posted by Lord_RTKK
seems that only week 29 are decent all others seem to suck for now, wonder what was different about that week :confused: